• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.6 s.109
• /
• pp.519-528
• /
• 2006

This thesis is regarding of fabricating wibro PAM. First of all, we need to set specification based on link budget for wibro communication circumstance in order to develop PAM, then we decided specification concerning of wibro PAM by considering TTAS_Ko_06_0082R1 which is standarded in Korea, and IEEE Std. 802. 16d/e which is international standard. We selected the Doherty structure to increase efficiency, and pre-distorter structure to increase linearity. The fabricated PAM has not only a result of $26.5dB{\pm}1.0dB$ gain characteristics and maximum of -14 dB return loss characteristics in full frequency bands and full output ranges, but also a result of 37 dBc at 4 tone IMD characteristics which is improved result of 843 and a result of 31 dBc spurious characteristics which is improved result of 5 dB at 4.77 MHz offset point in status of having 27 % efficiency in the 26 dBm high power amplifier output signal. We confirmed the suggested structure is better than others by comparing with normal structure, balanced structure and Doherty structure without predistorter.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.1
• /
• pp.115-119
• /
• 2008

In this paper, the linearity of Doherty power amplifier has been improved by applying a new Photonic Bandgap(PBG) structure on the output of amplifier. The reposed spiral PBG structure is a two-dimensional(2-D) periodic lattice patterned on a dielectric slab that does not require nonplanar fabrication process. This structure has more broad stopband and high suppression performance than the conventional three cell PBG. Also, It has a sharp skirt property. We obtained the 3rd-order intermodulation distortion(IMD3) of -33dBc for CDMA applications with that of maintaining the constant power added efficiency(PAE), the IMD3 performance is improved as much as -8 dB compared with a Doherty power amplifier without PBG structure. Moreover, the physical length of PBG is shortened, therefore the whole amplifier circuit size is considerably reduced.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.5
• /
• pp.72-79
• /
• 2010

In this paper, we describe the design and implementation of a high efficiency Doherty power amplifier using gallium nitride (GaN) high-electron mobility transistor (HEMT). The carrier and peaking amplifiers of the proposed Doherty power amplifier consist of the switching-mode Class-E power amplifiers. The test conditions are a duty of 10% and a pulse width of $100\;{\mu}s$ and pulse repetition frequency (PRF) of 1 kHz for a S-band radar application. A RF performance peak PAE of 64% with drain efficiency of 80.6%, at 6 dB output back-off point from saturated output power of 45.5 dBm, was obtained at 2.85 GHz.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.2
• /
• pp.81-86
• /
• 2007

In this paper, the Power Added Efficiency (PAE) and linearity of class-F PA has been improved by using the PBG structure and the application of EER structure, simultaneously. The adaptive bias control circuit has been employed to improve the PAE through the application of EER structure. The PBG structure has been adapted for improving the Linearity by suppressing the harmonics on the output of amplifier. The PAE and the 3rd Inter-Modulation Distortion (IMD) has improved 34.56%, 10.66 dB, compared with those of the conventional Doherty amplifier, respectively.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.4
• /
• pp.51-58
• /
• 2004

Push-pull structure with balun transformer is presented for load modulation technique which improves the overall efficiency of power amplifier Under the assumption that output impedance of fumed-off amplifier is high, conventional Doherty amplifier is composed of impedance inverter and peaking amplifier, of which operation is controlled by the input power level. In many case, however, impedance of 'off'amplifier is very low due to matching network or parasitic output capacitance. This paper introduces novel load modulation technique which uses low output impedance of 'off'amplifier. Experimental results show that good linearity and efficient!'enhancement of the proposed push-pull structure

• Journal of electromagnetic engineering and science
• /
• v.14 no.4
• /
• pp.399-404
• /
• 2014

A power amplifier (PA) for a femto-cell base station should be highly efficient, linear and small. The efficiency for amplification of a high peak-to-average power ratio (PAPR) signal was improved by designing an asymmetric Doherty PA (DPA). The linearity was improved by applying third-order inter-modulation (IM3) cancellation method. A small size is achieved by designing the DPA using GaN MMIC process. The implemented 2-stage DPA delivers a power-added efficiency (PAE) of 38.6% and a gain of 33.4 dB with an average power of 34.2 dBm for a 7.2 dB PAPR 10 MHz bandwidth LTE signal at 2.14 GHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.6 s.121
• /
• pp.584-590
• /
• 2007

In this paper, the efficiency of power amplifier has been maximized by the application of EER structure, and the linearity has been improved by using PBG structure. This paper has proposed a design of power amplifier in class-F to get the PAE, and to control dynamic power using envelope detector. PBG structure gets high-linearity by removing harmonics arisen from the mismatching of matching circuit. The PAE and the 3rd order IMD have been improved 34.64%, 6.65 dB compared with those of conventional Doherty amplifier, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.8 s.99
• /
• pp.815-824
• /
• 2005

In this paper, we proposed a new DGS(Defected Ground Structure) Doherty amplifier for IMT-2000 band. Originally, active load-pull analysis of a Doherty amplifier assumes ideal harmonic termination condition. However, there have been no papers considering this ideal harmonic termination condition. We obtained excellent improvements of efficiency, gain, maximum output power as well as superior size reduction of a Doherly amplifier by satisfying the overlooked assumption of ideal harmonic termination through the adaptation of DGS at the output transmission line of carrier and peaking amplifier that is essential for Doherty operation. The amount of both the 2nd and the 3rd harmonic rejection of the proposed DGS Doherty amplifier over the conventional one are 44.92 dB and over 23.77 dB, respectively. The acquired improvement in Pl dB, gain, drain efficiency, and ACPR to WCDMA 1FA signal were 0.42 dB, 0.33 dB, $6.4\%$ and 5.4 dBc, respectively. Moreover, electrical length of $90{\circ}$ is reduced at each of the DGS carrier amplifier path and DGS peaking amplifier path, therefore the whole amplifier circuit size is considerably reduced.

• 한국정보통신설비학회:학술대회논문집
• /
• 2006.08a
• /
• pp.62-66
• /
• 2006

본 논문은 도허티 증폭기 및 포락선 전치 왜곡기를 이용한 전력 증폭기의 효율 및 선형성 개선에 관한 것이다. 전력 증폭기의 효율을 개선하기 위하여 도허티 증폭기를 제작하여 효율 특성을 개선하였으며, 포락선 전치 왜곡기를 이용하여 도허티 증폭기의 선형성 개선량에 대하여 조사하였다. 제작된 도허티 증폭기는 AB 급으로 동작시킨 전력 증폭기와 비교하여 출력 전력 10W에서 8.5%의 효율 개선 효과를 보였으며, 출력 전력 40W에서 12.6%의 효율 개선 특성을 나타내었다. 포락선 전치 왜곡기를 이용한도 허티 증폭기는 출력 전력 10W에서 7dB의 선 형성 개선 효과를 나타내었다. IMT-2000 주파수 대역에서 WCDMA down-link 4 carrier 신호를 이용하여 출력 전력 10W에서 측정한 결과 AB 급으로 동작하는 전력 증폭기와 비교하여 4.2%의 효율 개선 및 6.3dB의 선형성 개선 효과를 나타내었다.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.71-72
• /
• 2006

In this paper, we designed and fabricated the Doherty power amplifier which operates at 2140 MHz by using MRF 21125 RF Power FET (Motorola Co.) and Teflon substrate (${\varepsilon}_r$=2.55, H=0.76 mm, t=$70{\mu}m$, $tan{\delta}$=0.001). As a result, we obtained th improved efficiency and linearity in comparison with the conventional balanced amplifier.