• Title/Summary/Keyword: Divider

Search Result 541, Processing Time 0.027 seconds

Development of MMIC SSPA for 20GHz Band (20GHz 대 MMIC SSPA 개발)

  • 임종식;김종욱
    • Proceedings of the IEEK Conference
    • /
    • 1998.10a
    • /
    • pp.327-330
    • /
    • 1998
  • A 2watts MMIC(Monolithic Microwave Integrated Circuits) SSPA(Solid State Power Amplifiers) for 20GHz band communication systems has been designed, manufactured and measured. The 0.15um pHEMT technologywith the gate size of 400um for single device was used for the fabrication of MMIC Power Amplifier chips. The precision MIC patterns for the peripherals like power combiner/divider and microstrip lines were realized using hard substrate for gold wire/ribbon bonding. The measured data shows that this MMIC SSPA has the linear gain of 18dB, output power of 33.42dBm(2.2Watts)at 20~21GHz.

  • PDF

Precision Measurement Technique of DC Voltage/Resistance Ratio (직류 전압/저항 비율 초정밀 측정기술)

  • Kim, Kyu-Tae;Yu, Kwang-Min
    • The Transactions of the Korean Institute of Electrical Engineers D
    • /
    • v.51 no.3
    • /
    • pp.96-99
    • /
    • 2002
  • We developed 1:1 resistance ratio measurement system for precision measurement of a series-resistor type dc voltage divider. By using active guard technique and exchange technique, any leakage effects, which are one of the most critical error sources, were successfully removed. The best measurement uncertainty with the developed ratio measurement system was estimated to be approximately $10^{-8}\;for\;10\;k{\Omega}\;and\;100\;k{\Omega}$.

The Development of Hot Carrier Immunity Device in NMOSFET's (NMOSFET에서 핫-캐리어 내성의 소자 개발)

  • ;;;;Fadul Ahmed Mohammed
    • Proceedings of the IEEK Conference
    • /
    • 2002.06b
    • /
    • pp.365-368
    • /
    • 2002
  • WSW(Wrap Side Wall) is proposed to decrease junction electric field in this paper. WSW process is fabricated after first gate etch, followed NMI ion implantation and deposition & etch nitride layer New WSW structure has buffer layer to decrease electric field. Also we compared the hot carrier characteristics of WSW and conventional. Also, we design a test pattern including pulse generator, level shifter and frequency divider, so that we can evaluate AC hot carrier degradation on-chip.

  • PDF

Development of Power Divider for CDMA by Thin Film Technology (THIN FILM 기술을 이용한 CDMA용 전력분배기 개발)

  • 정동언
    • Journal of the Microelectronics and Packaging Society
    • /
    • v.2 no.2
    • /
    • pp.19-30
    • /
    • 1995
  • 일반적으로 마이크로 웨이브 영역에 사용되는 마이크로스트립 전송로는 후막 전도 선을 이용하여 RF 모듈을 구현할수 있으나 선폭의 고해상도가 전체 특성에 큰 영향을 미치 므로 고정도의 박막을 이용한 RF 모듈이 많이 개발되고 있다. 따라서 본 논고에서는 박막 제조기술을 이용하여 마이크로 웨이브 하이브리드의 한 종류인 WILKINSON 전력 분배기 를 개발하였고 공정 변수를 최적화함으로써 고특성 고신회성의 전력 분배기를 구현할 수 있 었다. 먼저 전도선의 두께의 영향을 고찰하였으며 제조 공정에 있어 GROUND 방법 /HOUSING 형상을 개선함으로써 용이하게 전력 분배기를 제조하였다. 마지막으로 MIL 규 격에 따른 전력분배기의 신뢰성 시험 항목을 제시하였고 이에 따라 정격 전력을 계산, 측정 하였다.

Design and Fabrication of Low Phase-Noise Frequency Synthesizer using Dual Loop PLL for IMT-2000 (이중루프 PLL을 이용한 IMT-2000용 저위상잡음 주파수합성기의 설계 및 제작)

  • 김광선;최현철
    • Proceedings of the IEEK Conference
    • /
    • 1999.11a
    • /
    • pp.163-166
    • /
    • 1999
  • In this paper, frequency synthesizer that can be used in IMT-2000 was designed and fabricated using dual loop PLL(Phase Locked Loop). For improving phase noise characteristic Voltage Controlled Oscillator was fabricated using coaxial resonator and eliminated frequency divider using SPD as phase detector and increased open loop gain. Fabricated frequency synthesizer had 1.82㎓ center frequency, 160MHz tuning range and -119.73㏈c/Hz low phase noise characteristic.

  • PDF

A Modified Geometry for Planar Power Divider/Combiners without Chip Resistor below 10 GHz (10 GHz 이하에서 칩 저항이 필요 없는 수정된 형태의 평면형 전력 분배/결합기)

  • 한용인;김인석
    • Proceedings of the Korea Electromagnetic Engineering Society Conference
    • /
    • 2001.11a
    • /
    • pp.189-194
    • /
    • 2001
  • 본 논문에서는 10 GHz 이하에서 하나의 입력과 다수의 출력을 가지는 [10]에서 제시한 Taper형의 평면구조의 전력 분배/결합기의 구조를 수정하여 출력단의 폭이 다시 좁아지는 구조를 제안한다. 입력 정합 그리고 각 출력 단에서 출력 신호의 균형과 위상의 선형성을 위해 회로의 중앙에 하나의 원을 에칭 제거한 구조를 채택하여 2 GHz에서 개발한 전력 분배/결합구조를 [10]의 구조와 반사특성과 위상특성을 비교 분석하였다.

  • PDF

Design of CMOS Dual-Modulus Prescaler and Differential Voltage-Controlled Oscillator for PLL Frequency Synthesizer (PLL 주파수 합성기를 위한 dual-modulus 프리스케일러와 차동 전압제어발진기 설계)

  • Kang Hyung-Won;Kim Do-Kyun;Choi Young-Wan
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 2006.08a
    • /
    • pp.179-182
    • /
    • 2006
  • This paper introduce a different-type voltage-controlled oscillator (VCO) for PLL frequency synthesizer, And also the architecture of a high speed low-power-consumption CMOS dual-modulus frequency divider is presented. It provides a new approach to high speed operation and low power consumption. The proposed circuits simulate in 0.35 um CMOS standard technology.

  • PDF

A Study of Precision High Voltage Generator for Ion Injection (이온주입용 정밀고압 발생장치 연구)

  • 유동욱;정창용;백주원;조정구;조기연;김학성;원충연
    • Proceedings of the KIPE Conference
    • /
    • 1998.07a
    • /
    • pp.158-161
    • /
    • 1998
  • A precision high voltage generator for ion injection is implemented on HFZVS-PSCI (High Frequency Zero-Voltage-Switching Phase-Shift-Controlled Inverter). Some practical aspects of implementing precision high voltage generator with HFZVS-PSCI, such as a HFHV transformer, multiflier, and precision CR divider are discussed. The results show that the generator under the Phase-Shift-Controller has a fast dynamic response, low ripple voltage, and high accuracy.

  • PDF