• Korean Journal of Metals and Materials
• /
• v.47 no.5
• /
• pp.283-289
• /
• 2009

This paper dealt with a statistical analysis for evaluating the creep crack growth rate (CCGR) for Modified 9Cr-1Mo (ASTM Grade 91) steel. The CCGR data was obtained by the creep crack growth (CCG) tests conducted under various applied loads at $600^{\circ}C$. To obtain logically the B and q values used in the CCGR equation, three methods such as the least square fitting method (LSFM), the mean value method (MVM) and the probabilistic distribution method (PDM) were adopted and their CCGR lines were compared, respectively. In addition, a number of random variables were generated by using the Monte Carlo simulation (MCS), and the CCGR lines were predicted probabilistically. It was found that both the B and q coefficients followed a 2-parameter Weibull distribution well. In the case of the ranges of 10-90% for the probability variables, P(B, q), the CCGR lines were predicted. Fractographic study was conducted from the specimen after the CCG tests.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.1
• /
• pp.66-71
• /
• 2022

The insulator used for the transmission line is a device that is bonded with a cap, pin, ceramic, and cement to withstand insulation capacity and mechanical load. The insulator design can help to reduce the dispersion of the electric field; thus, the optimization of today's design, especially as demanded power grows, is critical. The designs of four manufacturers were used to perform a comparative analysis. Under dry circumstances of the new product, an electric field distribution study was done with no pollutants attached. Manufacturer D's design has the best voltage uniformity of 24.33% and the arc length of 500 mm or more. Manufacturer C's design has an equalizing voltage of more than 2% higher than that of other manufacturers. The importance of the design of the insulator and the number of connections according to the installation conditions is very efficient for transmission lines that will increase in the future.

• Horticultural Science & Technology
• /
• v.29 no.4
• /
• pp.336-344
• /
• 2011

Using the abundant available information about the tomato genome, we developed DNA markers that are linked to disease resistant loci and performed marker-assisted selection (MAS) to construct multi-disease resistant lines and varieties. Resistance markers of Ty-1, T2, and I2, which are linked to disease resistance to Tomato yellow leaf curl virus (TYLCV), Tomato mosaic virus (ToMV), and Fusarium wilt, respectively, were developed in a co-dominant fashion. DNA sequences near the resistance loci of TYLCV, ToMV, and Fusarium wilt were used for primer design. Reported candidate markers for powdery mildew-resistance were screened and the 32.5Cla marker was selected. All four markers (Ty-1, T2, I2, and 32.5Cla) were converted to cleavage amplification polymorphisms (CAPS) markers. Then, the CAPS markers were applied to 96 tomato lines to determine the phenetic relationships among the lines. This information yielded clusters of breeding lines illustrating the distribution of resistant and susceptible characters among lines. These data were utilized further in a MAS program for several generations, and a total of ten varieties and ten inbred lines were constructed. Among four traits, three were introduced to develop varieties and breeding lines through the MAS program; several cultivars possessed up to seven disease resistant traits. These resistant trait-related markers that were developed for the tomato MAS program could be used to select early stage seedlings, saving time and cost, and to construct multi-disease resistant lines and varieties.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.74.3-74.3
• /
• 2017

Considering the statistical redshift distribution of the known submillimeter galaxy (SMG) population, most of the significant optical emission lines such as [OII]${\lambda}3727$, $H{\beta}$, [OIII]${\lambda}5007$, and $H{\alpha}$ are redshifted into near-infrared. Using the 3D-HST grism data that provides low resolution NIR spectroscopy over the several deep fields covered by the JCMT large program S2CLS, I investigated the properties of the optical emission lines for submm galaxies which could be used as a proxy for future optical/NIR identification and follow up of the SMGs.

• Proceedings of the KIEE Conference
• /
• 1997.07e
• /
• pp.1896-1899
• /
• 1997

In this paper, New radiation system is presented to improve efficiency and distribution of MWO. And it has one input for two excitatied lines with located on them radiation elements(slots). Radiation elements are distributed along the lines the way that the same electrical distances from the magnetron. New radiation system recompences change of impedance at wide b and frequency.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1990.10a
• /
• pp.35-40
• /
• 1990

Temperature distribution of high pressure mercury lamp has been mesured as a function of time using spectroscopic method. Sampling signal which is synchronized by lamp voltage was used to mesure temporal line intensity at each radius. To obtain radial temprature distribution, the mesured intensity was transformed into radial line intensity by Abel's formula. Absolute temperature profile was calculater from relative intensities of spectral lines as a function of line and tube radius. The temperature profile is very similar to the electrical tube current profile.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.107-112
• /
• 1990

It is necessary to develop graphic MMI (Man-Machine Interface) for the maximum utilization of our installed ADS (Automated Distribution System) for which an operator types and executes string commands. Considering the restrictions and characteristics of the installed ADS and the data for modelled distribution lines, we calculated the time of periodic data acquisition for large number of points. And we presented the performance and characteristics of the graphic MMI system which will be developed and which will facilitate SCADA(Supervisory Control And Data Acquisition) functions.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.475-479
• /
• 2001

Compensation characteristics or active filters based on voltage detection are investigated. These active filters act equivalently as a passive circuit so that they may not cause practical problems such as stimulation of resonance in the distribution lines. Thus, these active filters can be used as the general-purpose active filters. On the other hand, these active filters may have a possibility of the anti-resonance associated with the line inductance of the distribution lines. In this paper, the relationship between the anti-resonance and the control parameters of the proposed active filters is clarified. Some methods to avoid the problems due to the anti-resonance are investigated. Experimental results are included to confirm the validity of the investigation presented in this paper.

• Korean Journal Plant Pathology
• /
• v.11 no.4
• /
• pp.338-343
• /
• 1995

Incidence of blast caused by Pyricularia grisea on five new cultivars and four elite lines (C/L) of rice was investigated at different locations, Icheon, Chuncheon, Jecheon and Naju, 1992 to 1994. Disease indices of leaf blast on the tested C/L except Juanbyeo and Keumnambyeo ranged from 0 to 6 in the blast nursery. Under the field conditions, percentages of diseased leaf area of Kuemnambyeo were 6.5% in Jecheon and 2.8% in Icheon in 1993. The incidence of panicle blast on the C/L except Suweon 394 and Milyang 117 differed depending on the locations and years. In case of Unjangbyeo, panicle blast was rarely observed n the fields in Icheon and Naju, but the disease incidences were 21.8% in Jecheon in 1993 and 16.4% in Chuncheon in 1994. Race distribution of the blast fungus was variable according to the locations. The major race in the Jecheon site was KI-197, which was recently identified.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.870-873
• /
• 1991

In this paper, We present demodulation and synchronization method of phase shift keying signal using Double Frequency Vector Technique for Reference Vector. 2nd Harmonic Vector for Reference Vector is utilized in discriminating between noise and carrier signal, and in producting correlation value for data bit logical level. And we applied this demodulator to Automatic Meter Reading System being communicated with electric distribution power lines.