• Proceedings of the KIEE Conference
• /
• 2004.11b
• /
• pp.246-248
• /
• 2004

The lower voltage distribution box of service wire has been usually employed to supply an electric power to the consumers through low voltage overhead line. Now-a-days, electric shock accident at the distribution box of service wire installed in the seashore areas has been often occurred. The reason is mainly due to the electric leakage in the distribution box of service wire. This paper described insulation breakdown mechanism of distribution box of service wire, analysis of electric shock path and safety countermeasure of distribution box of service wire.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.32 no.E
• /
• pp.20-32
• /
• 1990

Abstract This study was conducted to pursue the normalization of frequency distribution by making an approach to the coefficient of skewness to nearly zero through the Box-Cox transformation, to get probable flood flows can be calculated by means of the transformation equation which has been derivated by Box-Cox transformation in the annual maximum series of the applied watersheds. It has been concluded that Box-Cox transfromation is proved to be more efficient than logarithmic, square root and SMEMAX transformation which is based on the trigonometric solution of a right triangle whose three verteces repesent the smallest, median and largest observed values of a population in making the coefficient of skewness nearer to zero. Consequently it is shown that probable flood flows according to the return period based on Box-Cox transformation are closer to the observed data as compared to other methods including SMEMAX transformation and fitted probability distributions such as the three parameter lognormal and the type I extremal distribution for the applied watersheds.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.2
• /
• pp.88-97
• /
• 2011

For Korean design provisions are not equipped for skewed steel box girder bridges, when American provisions are adopted, load distribution factors different from real behavior are determinated. Furthermore the possibility of over or under estimated bridge design involves. The aim of this study is to provide more rational load distribution factor formulas based on real behavior for shear at obtuse corner of skewed steel box girder bridges. In order to accomplish the aim finite element analysis for a variety of skewed steel box girder bridge structural models is carried out, and each parameters degree of influence on wheel load distribution factors of skewed steel box girder bridges are analyzed. Then multiple regression analysis is fulfilled in order to propose formulas for determinating shear force load distribution factor of skewed steel box girder bridges.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.12 no.2
• /
• pp.103-108
• /
• 2006

In order to determine safety factor of corrugated fiberboard boxes for agricultural products, relationship with effect of relative humidity and structure of box types must be defined. The results obtained from the study were summarized as follows; 1. Results show a detrimental effect on bursting strength of corrugated boards with increasing relative humidity of environment. 2. Compression strength of corrugated boards were decreased rapidly after the relative humidity was over 70 percent. 3. Compression strength of corrugated board boxes were greatly depending on the box types. Folder type showed the best performance at higher humidity environment while bliss type was the worst. 4. Further studies are needed in order to expect box compression strength in real distribution environment.

• Communications for Statistical Applications and Methods
• /
• v.11 no.2
• /
• pp.323-327
• /
• 2004

In this paper, we investigate the limiting distribution of the Ljung-Box test statistic in the unit root AR models with ARCH errors. We show that the limiting distribution is approximately chi-square distribution with the degrees of freedom only depending on the number of autocorrelation lags appearing in the test. Some simulation results are provided for illustration.

• Steel and Composite Structures
• /
• v.44 no.5
• /
• pp.619-632
• /
• 2022

There are numerous structural details (Longitudinal beam, web plate, U-ribs and I-ribs) in the top and bottom plates of steel box girders, which have significant influences on the longitudinal stress (normal stress) distribution. Clarifying the influence of these structural details on the normal stress distribution is important. In this paper, the ultra-wide steel box girder with large cantilevers of the Jinhai Bridge in China, which is the widest cable-stayed bridge in the world, has been analyzed. A 1:4.5 scale laboratory model of the steel box girder has been manufactured, and the influence of structural details on the normal stress distribution in the top and bottom plates for four different load cases has been analyzed in detail. Furthermore, a three-dimensional finite element model has been established to further investigate the influence regularity of structural details on the normal stress. The experimental and finite element analysis (FEA) results have shown that different structural details of the top and bottom plates have varying effects on the normal stress distribution. Notably, the U-ribs and I-ribs of the top and bottom plates introduce periodicity to the normal stress distribution. The period of the influence of U-ribs on the normal stress distribution is the sum of the single U-rib width and the U-rib spacing, and that of the influence of I-ribs on the normal stress distribution is equal to the spacing of the I-ribs. Furthermore, the same structural details but located at different positions, will have a different effect on the normal stress distribution.

• Food Science and Preservation
• /
• v.10 no.1
• /
• pp.23-27
• /
• 2003

This study was conducted to develop the corrugated fiberboard box which is suitable to pre-cooling and low temperature distribution of chinese cabbage Consider from a cooling performance viewpoint, the folding type box with 5.4% vent hole ratio was most efficient for fast cooling and even temperature distribution in the packaging box. At the end of storage periods, the compressive strength of the folding type box was less than the bliss type box. However, the compressive strength of the folding type box after storage was higher than required safety compressive strength for long term storage. So the folding type box was considered to have no problems toy practical use. The shelf-life of the chinese cabbage packaged with the developed box was 6∼7 days which was 2∼3 days longer than usual packaging.

• Sijohaknonchong
• /
• v.19 no.1
• /
• pp.235-260
• /
• 2003

Recently, I presented Gagok(歌曲) Collection Yeong-eon永言 to learned circles. Yeong-eon is very similar to Yukdang-version六堂本 CheongGuYeongeon靑丘永言. Compared with Cheong- Yuk, it is the same age or little bit early time of Cheong-Yuk in culture Icon. This paper paid attention to the considerable difference between Yeong-eon and Cheong-Yuk in the way of the distribution of Yisakdaeyap二數大 葉's Woo mode羽調 and Ke-myeon mode界面調. There was the way of gathering ‘real name’+‘namelessness’ in Yisakdaeyap, which is the feature of the 18th century Gagok Collection. I found this way just put on the 19th century Gagok Collection way which is the distribution of Yisakdaeyap's 'Woo mode and Ke-myeon mode' in CheongYuk. Then I proved in this paper that the way of gathering Yisakdaeyap in Cheong Yuk didn't correspond to an actual singing in the early 19th century when 'Woo mode and Ke-myeon mode' was fixed. In case of Yeong-eon, however, it was not written any writers' names at all, when it was researched retroactively, I knew it was distributed evenly both the works of 'real name' and 'namelessness' in Yisakdaeyaps 'Woo mode and Ke-myeon mode'. Consequently, I found Yeong-eon is the good Gagok Collection for an actual singing at that time. In addition, there was discord in the mode or key distribution among many Gagok Collections. I found this issue of the application had kept on make Gagok Collections edit during 2 centuries. Because the actual Gagok enjoyment in the specific time is connected the way of the mode application directly.

• Food Science and Preservation
• /
• v.6 no.4
• /
• pp.402-405
• /
• 1999

Pusan, Kwanagju, Yangjae Floriculture Auction Market to packaging and distribution status of cut flowers in Korean markets from October, 1997 to Feburuary, 1998 this study was surveyed. In case of packaging, the inner packaging materials was used almost used news papers and polyethylene films, the outer box was double wall corrugated paperboard box. Plastic container box was a few. The using shape of box was A-1 type, bending materials was PP film and OPP tape. There was whole sale and retail in all Korean markets in case of distribution. The distribution route was three, the one was farmers through consignments in Seoul to consummers, it was 42% of total distribution volume. The other was auction market in Yangjae, the distribution volume was 18%. The last was distributed in farmers and provincial markets by the dealers, the volume was 40%. All farmers and officers want to applicate the standard regulation of packaging box, but dealers were not.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.587-590
• /
• 2000

The new core making method economized on core sand requested. The new method is heating core box until it reaches reasonable temperature and then spraying core sand with core binder into core box. Inner temperature distribution have to uniform in order to form core of uniform thickness. Therefore, in this study we treat of inner temperature distribution of core box in priority. First, determine proper torch number. Next, optimize the torch position to minimize the average of absolute deviation(AVEDEV) of inner temperature. The results are as followed : 1. The torch number that makes inner temperature distribution about $300^\circ{C}$ uniformly is 25. 2. When $S_H$ and $S_V$ is 0.7, the torch position is optimized and AVEDEV is 5.85.