• Journal of the Korean Data and Information Science Society
• /
• v.26 no.2
• /
• pp.335-346
• /
• 2015

The purpose of this study is to compare not only network influence of individual coauthor but also the types and properties of two coauthor networks of Communications for Statistical Applications and Methods and the Korean Journal of Applied Statistics which are published by the Korean Statistical Society using social network analysis.As the result of two network structure comparison, density, inclusiveness, reciprocity and clustering coefficient which represent the type of coauthor networks show almost similar values and the Korean Journal of Applied Statistics has bigger values in average degree, average distance and diameter because it has more nodes than Communications for Statistical Applications and Methods. Finally two journals have very similar type of coauthor network. In the comparison of network centrality of two coauthor networks, closeness centrality and betweenness centrality of the Korean Journal of Applied Statistics are bigger than those of Communications for Statistical Applications and Methods at the statistical significance level 0.05. The coauthor network of the Korean Journal of Applied Statistics has faster information delivery and stronger betweenness than that of Communications for Statistical Applications.

• Solar Energy
• /
• v.13 no.1
• /
• pp.1-10
• /
• 1993

The purpose of this research is to investigate the characteristics of heat transfer in the downward axisymmetric free water jet system impinged on a flat oblique plate which has the uniform heat flux. Experimental conditions considered were Reynolds number, distance between nozzle and Bat plate, inclination angle of heater surface and nozzle exit velocity. Local Nusselt number was subjected to the influence of Re number, Pr number, oblique angle of heating surface and local position of flat plate. In the wall region of downward surface, The secondary peak point of heat transfer appeared at the local point of X/D=-8 from the stagnation point. The stagnation heat transfer rate of this experimental study augments 2.4 times than that of laminar theorical solution. The stagnation nusselt number is function of Reynolds number, nozzle-plate spacing Prandtl number and oblique angle of impinging plate.

• Journal of Distribution Science
• /
• v.12 no.6
• /
• pp.67-79
• /
• 2014

Purpose - This study aims to accomplish three major research goals. First, it strives to change consumers' focus from peripheral routes to a central route of public service advertising related to the good health policy, without problematic effects, by influencing consumers' knowledge or involvement. Second, this study examines the elaboration likelihood model (ELM) and construal level theory (CLT). Specifically, we consider that the central route of ELM might correspond with the focal goal of CLT. Third, this study analyzes ELM through CLT. That is, ELM predicted that low involvement would take the peripheral route, and high involvement would take the central route. Research design, data, and methodology - This study consisted of three experiments. The first experiment had a 2×2 between-subject design. The subjects were university students and the research period was approximately one year. The first independent variable was the involvement of the overweight issue; this variable was measured and split by the median. The second independent variable was the temporal distance (near vs. distant future); this variable was manipulated. The second experiment also had a 2×2 between-subject design. The first variable was the involvement of cervical adenocarcinoma prevention, and was considered already manipulated by sex. Specifically, males had a low involvement of the disease, but females had high involvement. The second independent variable was priming (power vs. submissive). Power priming would induce abstract thinking, but submissive priming would take concrete processing. The third experiment had a 2×2×2 between-subject design. The first variable was cognitive depletion, and was manipulated by memorizing 9-digit numbers. The second and third independent variables were involvement and abstract thinking induction, such as prior experiments. Data were collected through questionnaires, and were analyzed by an SPSS program. Major hypotheses were tested by examining the interaction effects through ANOVA. Results - Major findings are as follows. First, even for low-involved consumers in the overweight category, distant future manipulation induced them to focus not on the peripheral route but on the central route of the public service advertisement. This result does not correspond to the typical ELM prediction. Second, under power priming, low-involved males of the cervical adenocarcinoma category focused on the peripheral route because of the induction to abstract thinking. This result replicated the first experiment, and confirmed the theoretical robustness. Third, high-involved females focused not on the central but on the peripheral route under the mixed condition of cognitive depletion and near future manipulation. Depletion consumed cognitive resources, and the processing mode of consumers changed from systematic to heuristic. Conclusions - ELM needs to be complemented through CLT in context of public service good health advertising. Specifically, the involvement of ELM may impact consumers' thinking mode (abstract vs. concrete), and the interaction effects may influence consumers' focus on advertising (central vs. peripheral route). This study's limitations were bounded subjects, limited stimuli, and somewhat weak external validity.

• Korean journal of applied entomology
• /
• v.55 no.4
• /
• pp.483-487
• /
• 2016

The damage of citrus fruits caused by Scirtothrips dorsalis Hood has being increased in Jeju, Korea. The seasonal abundance of S. dorsalis and its injury symptoms in citrus orchards have been studied since the endemic outbreak in Jeju, but studies for the occurrence pattern of S. dorsalis in citrus orchards influenced by adjacent primary hosts have not been fully conducted yet. We selected kiwi- and mango-citrus adjacent orchards to study the migration pattern of S. dorsalis toward to citrus orchards. Yellow-colored sticky traps were used for monitoring the seasonal abundance of S. dorsalis and their migration pattern in two orchards. In citrus orchards, also, we placed sticky traps at 0, 5, 10, 15 and 20 m apart from the border of kiwi orchard, and 0, 7 and 20 m apart from the border of mango orchard. The seasonal occurrence pattern of S. dorsalis caught on sticky traps were similar between two adjacent orchards. However, the abundances in kiwi or mango orchard was much higher than those of citrus. Also, it was found that densities, distribution and damage of S. dorsalis in citrus orchards depend highly on the distance from the border of kiwi and mango orchards. This result suggested that the primary hosts such as kiwi and mango plants influence the occurrence of S. dorsalis in adjacent citrus orchards. And this information may provide a basic direction for establishing the management strategy of S. dorsalis in citrus orchards.

• Journal of Environmental Science International
• /
• v.25 no.10
• /
• pp.1349-1368
• /
• 2016

Concentrations of fine particulate matter ($PM_{2.5}$) and several of its particle constituents measured outside homes in Houston, Texas, and Los Angeles, California, were characterized using multiple regression analysis with proximity to point and mobile sources and meteorological factors as the independent variables. $PM_{2.5}$ mass and the concentrations of organic carbon (OC), elemental carbon (EC), benzo-[a]-pyrene (BaP), perylene (Per), benzo-[g,h,i]-perylene (BghiP), and coronene (Cor) were examined. Negative associations of wind speed with concentrations demonstrated the effect of dilution by high wind speed. Atmospheric stability increase was associated with concentration increase. Petrochemical source proximity was included in the EC model in Houston. Area source proximity was not selected for any of the $PM_{2.5}$ constituents' regression models. When the median values of the meteorological factors were used and the proximity to sources varied, the air concentrations calculated using the models for the eleven $PM_{2.5}$ constituents outside the homes closest to influential highways were 1.5-15.8 fold higher than those outside homes furthest from the highway emission sources. When the median distance to the sources was used in the models, the concentrations of the $PM_{2.5}$ constituents varied 2 to 82 fold, as the meteorological conditions varied over the observed range. We found different relationships between the two urban areas, illustrating the unique nature of urban sources and suggesting that localized sources need to be evaluated carefully to understand their potential contributions to $PM_{2.5}$ mass and its particle constituents concentrations near residences, which influence baseline indoor air concentrations and personal exposures. The results of this study could assist in the appropriate design of monitoring networks for community-level sampling and help improve the accuracy of exposure models linking emission sources with estimated pollutant concentrations at the residential level.

• Journal of Periodontal and Implant Science
• /
• v.31 no.3
• /
• pp.641-649
• /
• 2001

The aim of present study was to assess the thickness of masticatory mucosa on the hard palate and tuberosity as a potential donor site for mucogingival surgery. Thickness measurement was performed in 30 dental college students who are periodontally healthy, with a recently developed, ultrasonic device(SDM). The mean age of study subjects was 23.7(range 21-29) years old and the subjects were composed of 18 males and 12 females. Eighteen standard measurement points were defined on the hard palate, located on 3 lines which ran at different distances parallel to the gingival margin. Six positions were designated on each of these 3 lines between the level of the canine and the second molar. On the tuberosity, 6 standard measurement points were defined, located on 2 lines running parallel to the gingival margin at different distances. Data were analyzed to determine differences in gender, between different positions, and between lines, by an analysis of variance. The results showed that the mucosa of the tuberosity was significantly thicker than that of the hard palate region. Gender did not influence the thickness of masticatory mucosa, either on the hard palate or the tuberosity. On the hard palate, mucosa thickness increased as the distance from the marginal gingiva increased. The mucosa over the palatal root of the maxillary first molar was significantly thinner than that at all other positions on the hard palate. Measurement error at palate was 0.25mm, at tuberosity 0.51mm. No difference in the thickness of masticatory mucosa on palate and tuberosity was found between men and women. On the hard palate, soft tissue thickness progressively increased in sites further from the gingival margin. Therefore, we may harvest more thicker graft on the tuberosity that has more masticatory mucosa thickness than hard palate, however the width may not be sufficient for using.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.6
• /
• pp.780-786
• /
• 2007

Statement of problem. The performance and maintenance of implant-supported prostheses are primarily dependent upon load transmission both at the bone-to-implant interface and within the implant-abutment-prosthesis complex. The design of the interface between components has been shown to have a profound influence on the stability of screw joints. Purpose. The Purpose of this study was to compare the strength and the fatigue resistance of 1-piece and 2-piece abutment connected to oral implant, utilizing an internal conical interface. Material and methods. Twenty $Implatium^{(R)}$ tapered implants were embedded to the top of the fixture in acrylic resin blocks. Ten $Combi^{(R)}$(1-piece) and $Dual^{(R)}$(2-piece) abutments of the same dimension were assembled to the implant, respectively. The assembled units were mounted in a testing machine. A load was applied perpendicular to the long axis of the assemblies and the loading points was at the distance of 7mm from the block surface. Half of 1-piece and 2-piece abutment-implant units were tested for the evaluation of the bending strength, and the others were cyclically loaded for the evaluation of the fatigue resistance until plastic deformation occurred. Nonparametric statistical analysis was performed for the results. Results. Mean plastic and maximum bending moment were $1,900{\pm}18Nmm,\;3,609{\pm}106Nmm$ for the 1-piece abutment, and $1,250{\pm}31Nmm,\;2,688{\pm}166Nmm$ for the 2-piece abutment, respectively. Mean cycles and standard deviation when implant-abutment joint showed a first plastic deformation were $238,610{\pm}44,891$. cycles for the 1-piece abutment and $9,476{\pm}3,541$ cycles for the 2-piece abutment. A 1-piece abutment showed significantly higher value than a 2-piece abutment in the first plastic bending moment (p<.05), maximum bending moment (p<.05) and fatigue strength (p<.05). Conclusion. Both 1-piece and 2-piece conical abutment had high strength and fatigue resistance and this suggests long-term durability without mechanical complication. However, the 1-piece conical abutment was more stable than the 2-piece conical abutment in the strength and the fatigue resistance.

• Journal of the Korean Geographical Society
• /
• v.48 no.6
• /
• pp.856-878
• /
• 2013

This paper examines the recent changes of urban center in metropolis in terms of land use. Jung-Gu, Daegu City is analyzed for a case study, and publicly notified individual land price data of 2000 and 2011 are used as analysis materials. The analyzing results show that a lot of residential land uses diminished in urban center, but residential function is still significant despite such decrease. Commercial land uses also decreased. Office land uses increased, but the increase is insignificant. On the contrary, unused or miscellaneously used land increased considerably. The phenomena implicate that land uses in the urban center are not positive under the influence of inner city decline. Overall, more land use changes occurred in the frame than in the core of urban center. That is, land uses in the core is more stable than them in the frame. However, decreasing commercial land uses in the core is noticeable, comparing to the frame. Mixed land uses for residence and commerce are most deconcentrated and office land uses most concentrated. Mean center point and standard deviation distance of land uses did not change significantly from 2000 to 2011, despite considerable change of land uses. The finding reveals that land use changes are widely occurring in urban center.

• Computers and Concrete
• /
• v.3 no.5
• /
• pp.301-312
• /
• 2006

Experimental research revealed that the spatial dispersion of aggregate grains exerts pronounced influences on the mechanical and durability properties of concrete. Therefore, insight into this phenomenon is of paramount importance. Experimental approaches do not provide direct access to three-dimensional spacing information in concrete, however. Contrarily, simulation approaches are mostly deficient in generating packing systems of aggregate grains with sufficient density. This paper therefore employs a dynamic simulation system (with the acronym SPACE), allowing the generation of dense random packing of grains, representative for concrete aggregates. This paper studies by means of SPACE packing structures of aggregates with a Fuller type of size distribution, generally accepted as a suitable approximation for actual aggregate systems. Mean free spacing $\bar{\lambda}$, mean nearest neighbour distance (NND) between grain centres $\bar{\Delta}_3$, and the probability density function of ${\Delta}_3$ are used to characterize the spatial dispersion of aggregate grains in model concretes. Influences on these spacing parameters are studied of volume fraction and the size range of aggregate grains. The values of these descriptors are estimated by means of stereological tools, whereupon the calculation results are compared with measurements. The simulation results indicate that the size range of aggregate grains has a more pronounced influence on the spacing parameters than exerted by the volume fraction of aggregate. At relatively high volume density of aggregates, as met in the present cases, theoretical and experimental values are found quite similar. The mean free spacing is known to be independent of the actual dispersion characteristics (Underwood 1968); it is a structural parameter governed by material composition. Moreover, scatter of the mean free spacing among the serial sections of the model concrete in the simulation study is relatively small, demonstrating the sample size to be representative for composition homogeneity of aggregate grains. The distribution of ${\Delta}_3$ observed in this study is markedly skew, indicating a concentration of relatively small values of ${\Delta}_3$. The estimate of the size of the representative volume element (RVE) for configuration homogeneity based on NND exceeds by one order of magnitude the estimate for structure-insensitive properties. This is in accordance with predictions of Brown (1965) for composition and configuration homogeneity (corresponding to structure-insensitive and structure-sensitive properties) of conglomerates.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.3
• /
• pp.271-277
• /
• 2014

Internal structures, especially those located in the upstream of a reactor core, may have a significant influence on the core inlet flow rate distribution depending on both their shapes and the relative distance between the internal structures and the core inlet. In this study, to examine the effect of the reactor internal structure geometry treatment method on the prediction accuracy for the scale-down APR+ flow distribution, simulations with real geometry modeling were conducted using ANSYS CFX R.14, a commercial computational fluid dynamics software, and the predicted results were compared with those of the porous medium assumption. It was concluded that the core inlet flow distribution could be predicted more accurately by considering the real geometry of the internal structures located in the upstream of the core inlet. Therefore, if sufficient computational resources are available, an exact representation of these internal structures, for example, lower support structure bottom plate and ICI nozzle support plate, is needed for the accurate simulation of the reactor internal flow.