• 반도체디스플레이기술학회지
• /
• 제4권4호
• /
• pp.27-31
• /
• 2005

This article contains the development of FPC bonder that used for repair or trial product. Nowadays, in FPO module process (including PDP) accept the thermo-compress bonding method when attach FPC(Flexible Printed Circuit Board), TCP(Tape Carrier Package) and COF(Chip on the FPC) by ACF(Anisotropic Conductive Film). This system consists of ACF attachment part, pre-bonding part, main bonding part, loading / unloading part. This composition is a stand-alone system, not an in-line system. Hereafter, this composition should be developing into in-line system in all area of FPD industry.

• 반도체디스플레이기술학회지
• /
• 제19권3호
• /
• pp.112-117
• /
• 2020

NAND flash memory is a non-volatile memory that retains stored data even without power supply. Internal memory used as a data storage device and solid-state drive (SSD) is used in portable devices such as smartphones and digital cameras. However, NAND flash memory carries the risk of electric shock, which can cause errors during read/write operations, so use error correction codes to ensure reliability. It efficiently recovers bad block information, which is a defect in NAND flash memory. BBT (Bad Block Table) is configured to manage data to increase stability, and as a result of experimenting with the error correction code algorithm, the bit error rate per page unit of 4Mbytes memory was on average 0ppm, and 100ppm without error correction code. Through the error correction code algorithm, data stability and reliability can be improved.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.433-435
• /
• 2005

A new high efficiency active clamp forward converter suitable for the sustaining power module(SPM) of a plasma display panel (PDP) is proposed. It has a wide zero voltage switching (ZVS) range without inserting additional resonant inductor. Also, it features simpler structure, lower cost, less mass, and no effective duty loss. Furthermore, voltages across all rectifier diodes are clamped on the output voltage, which results in a higher efficiency.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1490-1493
• /
• 2009

In this work we present a new type of line plasma source using an internal-type ICP operated at 2MHz with a ferrite module, describe the effect of ferrite module on the enhancement of the plasma properties and the uniformity, and compare to those obtained with 13.56MHz discharge. Also the electrical characteristics of the antenna line and the characteristics of the plasma uniformity were studied.

• 반도체디스플레이기술학회지
• /
• 제9권4호
• /
• pp.93-97
• /
• 2010

Fast incipient fault diagnosis is becoming one of the key requirements for economical and optimal process operation management in high-tech industries. Artificial neural networks have been used to detect faults for a number of years and shown to be highly successful in this application area. This paper presents a novel test technique for fault detection and classification for module process of TFT-LCD manufacture using support vector machines (SVMs). In order to evaluate SVMs, this paper examines the performance of the proposed method by comparing it with that of multilayer perception, one of the artificial neural network techniques, based on real benchmarking data.

• 반도체디스플레이기술학회지
• /
• 제14권4호
• /
• pp.67-71
• /
• 2015

Product of technology developed in this study is an external interface for controlling the equipment of pendant key remote control system circuit board, and it is used in the electronic component test equipment system. Main control system module is in the role as a device for controlling the various control devices that make up the integrated system for microscopic examination at the request of the host computer engineers to control the inspection equipment. The pentane-key interface module to its role as a device for controlling the various control devices that make up the integrated system for microscopic examination at the request of the host computer for the engineer to control the inspection equipment. Development of the control system can be expected in the configuration of a system for efficient and accurate inspection of high-precision parts.

• 반도체디스플레이기술학회지
• /
• 제11권3호
• /
• pp.39-44
• /
• 2012

Electronics in modern lives have become more miniaturized and precise. Multi Layered Ceramic Capacitor (MLCC) occupies 50% of electronic components consisting of electronics. This high volume of the production needs high speed and more precise machine performances. The dominate parts of the production equipments are the module transporting components and the visual inspection module. Most visual inspection has been off-line because of the image processing time. In this paper, a new image processing method is proposed to reduce thousands of matrix calculation for image processing and realize on-line high speed inspection.

• 반도체디스플레이기술학회지
• /
• 제10권2호
• /
• pp.109-113
• /
• 2011

Hot air flow simulations of the wet station dryer module for the solar cell cleaning were conducted. Air incident angles such as to the substrates ($45^{\circ}$), to the bottom ($90^{\circ}$), and to the wall ($135^{\circ}$) were considered. Based on the simulated velocity and temperature profiles, appropriate incident angle was proposed, and it was well matched to experimental results. Additionally, uniform and non-uniform air hole sizes of the tube were compared for the uniform air flow distribution through the batch.

• 반도체디스플레이기술학회지
• /
• 제20권3호
• /
• pp.108-112
• /
• 2021

For smart mobile devices, the wireless communication module is one of the hardware modules that consume the most energy. If we can build a multi-channel multi-interface environment using heterogeneous communication modules and operate them dynamically, data transmission performance can be highly improved by increasing the parallelism. Also, because these heterogeneous modules have different data rates, transmission ranges, and power consumption, we can save energy by exploiting a power efficient and low speed wireless interface module to transmit/receive sporadic small data. In this paper, we propose a power efficient data transmission method using heterogeneous communication networks. We also compared the performance of our proposed scheme to a conventional scheme, and proved that our proposed scheme can save energy while guaranteeing reasonable data delivery time.

• 반도체디스플레이기술학회지
• /
• 제21권1호
• /
• pp.85-90
• /
• 2022

In this paper, an asynchronous nonvolatile memory module using a self-diagnosis function was designed. For the system to work, a lot of data must be input/output, and memory that can be stored is required. The volatile memory is fast, but data is erased without power, and the nonvolatile memory is slow, but data can be stored semi-permanently without power. The non-volatile static random-access memory is designed to solve these memory problems. However, the non-volatile static random-access memory is weak external noise or electrical shock, data can be some error. To solve these data errors, self-diagnosis algorithms were applied to non-volatile static random-access memory using error correction code, cyclic redundancy check 32 and data check sum to increase the reliability and accuracy of data retention. In addition, the possibility of application to an asynchronous non-volatile storage system requiring reliability was suggested.