• Interaction and multiscale mechanics
• /
• 제1권4호
• /
• pp.437-448
• /
• 2008

This paper examined the stability of high-dense dislocation substructures (HDDSs) associated with martensite laths in High Cr steels supposed to be used for FBR, based on a series of dislocation dynamics (DD) simulations. The DD simulations considered interactions of dislocations with impurity atoms and precipitates which substantially stabilize the structure. For simulating the dissociation processes, a point defect model is developed and implemented into a discrete DD code. Wall structure composed of high dense dislocations with and without small precipitates were artificially constructed in a simulation cell, and the stability/instability conditions of the walls were systematically investigated in the light of experimentally observed coarsening behavior of the precipitates, i.e., stress dependency of the coarsening rate and the effect of external stress. The effect of stress-dependent coarsening of the precipitates together with application of external stress on the subsequent behavior of initially stabilized dislocation structures was examined.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.180-183
• /
• 1999

It is well known that Fe3Al intermetallic compound shows an anomalous peak of the yield strength at about 50$0^{\circ}C$ and then decrease at higher temperatures The dislocation structure was examined by transmission electron microscopy and high temperatures. The dislocation structure was examined by transmission electron microscopy and high temperature mechanical properties were examined by tensile and load relaxation tests. The flow stress curves obtained from load relaxation tests were then analyzed in terms of internal variable deformation theory. it was found that the flow curves consisted of three micro-deformation mechanisms -i. e inelastic deformation mode plastic deformation mode and dislocation creep deformation mode depending on both dislocation structure and deformation temperature. The flow curves could be well described by the constitutive equations of these three micro-deformation mechanisms based on the internal variable deformation theory.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1794-1799
• /
• 2008

The effect of misfit on the indentation behaviour of silver coated copper multilayer was studied by molecular dynamics simulation. It was found that the misfit bands on interface formed by the mismatch of lattice structure between copper and silver in slip direction [110] and the dislocation band width depended on the mismatched lattice constants of materials. More dislocations were created and glided by indentation, which created a "four-wing flower" structure consisting of pile. up of dislocation at the interface. The size of "flower" depended on the thickness of silver layer. The critical thickness for "flower" was approximately 4nm above which the "flower" disappeared. As the result, deformation mechanisms such as dislocation pile-up, dislocation cross-slip and movement of misfit dislocation were revealed. Only silver atoms in the dislocation pile-up were involved in the creation of the "flower" while the dislocations in copper were glided in slip direction on interface.

• Applied Microscopy
• /
• 제36권spc1호
• /
• pp.41-46
• /
• 2006

Interfacial atomic structure (chemical structure) of a Pd/ZnO hetero junction was investigated by atomic resolution high voltage transmission electron microscopy (ARHVTEM). A misfit dislocation did not work as a stress accommodation mechanism in the ZnO(0001)/Pd (111) interface. But the periodic stress localization occurred in the ZnO($10\bar{1}0$)/(200) interface. The periodicity of the local strain coincided with that of misfit dislocation. Atomic structure image of the ARHVTEM showed that an atomic arrangement across the interface was in the order of O-Zn-Pd. It was shown that mechanical weakness of the ZnO(0001)/Pd(111) interface against cyclic heating is attributable to the absence of the periodic stress localization of the misfit dislocation.

• 비파괴검사학회지
• /
• 제30권5호
• /
• pp.444-450
• /
• 2010

본 연구에서는 전류 4단자 전위차법을 이용한 전기비저항을 측정하여 반복피로손상을 받은 구리와 구리합금의 미시적 열화를 평가하였다. 서로 매우 다른 적층결함 에너지를 갖는 구리(Cu)와 구리합금(Cu-35Zn)에 대해 반복피로손상을 가하고 이들 재료에서 발달한 전위구조와 전기비저항 간의 관계를 연구하고자 하였다. Cu는 전위셀 하부구조를 형성하였지만, Cu-35Zn 합금은 피로사이클에 따라서 전위밀도는 증가하고 평면배열의 전위구조를 형성하였다. 전기비저항은 두 재료 모두에서 피로변형 초기 단계에서 급격하게 증가하였다. 더욱이, 피로시험 후 구리는 약 7 % 그리고 구리 합금은 약 6.5 % 변하였다. 이러한 일관적인 결과들로부터, 반복적인 피로에 의해 발달한 전위 셀구조는 평면배열의 전위구조보다도 전기비저항에 매우 민감한 것으로 판단된다.

• 한국세라믹학회지
• /
• 제28권11호
• /
• pp.878-884
• /
• 1991

The mobility and diffusivity in an edge dislocation in an FCC crystal formed by the removal of one half of a (100) plane were evaluated in an applied field by analyzing a vacancy tight binding model using Stark's matrix technique. A model of an edge dislocation in an FCC crystal was constructed for a [100] Burgers vector where vacancy transport along the edge dislocation in an FCC crystal was constructed for a [100] Burgers vector where vacancy transport along the edge of the extrac half plane of ions was considered. The model considered a tight binding approximation of the vacancy to the compressed region of the core and carried the calculation to the limit of an infinite length of dislocation. The diffusivity and the ratio of mobility to diffusivity were found to increase without bounds in the limit where the correlation factor becomes zero. In contrast, as the correlation factor became unity, the diffusivity became zero and the ratio of mobility to diffusivity became unity associated with the uncorrelated limit of 1/kT. This implied that the phenomenon was not unique to the crystal structure but was unique to edge dislocations with vacancy tight binding.

• 한국세라믹학회지
• /
• 제26권5호
• /
• pp.661-669
• /
• 1989

The defect structure in LiNbO3 single crystals grown by Czochralski method from the congruently melting composition were investigated. Chemical etching patterns were studied in x-plane, z-plane, and major cleavage plane, respectively, dislocation density was higher at the periphery of crystals than at the center because the thermal stress due to radial temperature gradient had a main effect on it, as compared with dislocations formed from the solid-liquid interface. Many dislocation lineages were arranged along several directions.

• Journal of Trauma and Injury
• /
• 제29권4호
• /
• pp.167-171
• /
• 2016

Irreducible traumatic knee dislocation is rare. The knee dislocation is classified depending on the incarcerated structures. Complete reduction is achieved by extracting the incarcerated structure. Several reports introduce the reduction of irreducible traumatic knee dislocation by open surgery or arthroscopy. This case describes irreducible posterolateral knee dislocation with interposition of the vastus medialis. Closed reduction failed in the emergency room, and complete reduction was attained by arthroscopically sectioning the muscle and fascia of the vastus medialis in the intercondylar notch.

• Advances in nano research
• /
• 제1권3호
• /
• pp.171-182
• /
• 2013

The alternating current (AC) conductivity in semiconductor crystals with an open-core screw dislocation is studied in the current work. The screw dislocation in crystalline media results in an effective potential field which affects the electronic transport properties of the system. Therefore, from a technological view point, it is interesting to investigate properties of AC conductivity at frequencies of a few terahertz. To quantify the screw-induced potential effect, we calculated the AC conductivity of dislocated crystals using the Kubo formula. The conductivity showed peaks within the terahertz frequency region, where the amplitude of the AC conductivity was large enough to be measured in experiments. The measurable conductivity peaks did not arise in dislocation-free crystals threaded by a magnetic flux tube. These results imply different conductivity mechanisms in crystals with a screw dislocation than those threaded by a magnetic flux tube, despite the apparent similarity in their electronic eigenstates.

• Geomechanics and Engineering
• /
• 제35권4호
• /
• pp.411-424
• /
• 2023

Reasonable estimates of tunnel lining dislocations in the operation stage, especially under longitudinal differential settlement, are important for the design of waterproof gaskets. In this paper, a modified shell-joint model is proposed to calculate shield tunnel dislocations under longitudinal differential settlement, with the ability to consider the nonlinear shear stiffness of the joint. In the case of shell elements in the model, an elastoplastic damage constitutive model was adopted to describe the nonlinear stress-strain relationship of concrete. After verifying its applicability and correctness against a full-scale tunnel test and a joint shear test, the proposed model was used to analyze the dislocation behaviors of a shield tunnel in Shanghai Metro Line 2 under longitudinal differential settlement. Based on the results, when the tunnel structure is solely subjected to water-earth load, circumferential and longitudinal joint dislocations are all less than 0.1 mm. When the tunnel suffers longitudinal differential settlement and the curvature radius of the differential settlement is less than 300 m, although maximum longitudinal joint dislocation is still less than 0.1 mm, the maximum circumferential joint dislocation is approximately 10.3 mm, which leads to leakage and damage of the tunnel structure. However, with concavo-convex tenons applied to circumferential joints, the maximum dislocation value reduces to 4.5 mm.