• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.172-172
• /
• 2000

In this paper, we propose a new discrete-time sliding mode controller for reference tracking. Stability of tracking error is analyzed. Design method of sliding surface for tracking control is proposed. Simulation and experimental results are included to show the effectiveness of the proposed method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1444-1447
• /
• 1997

In this paper, the problen of dseigning a H.inf. controller is considered, where the controller is realized through digital equipment. We show that the existing discrete-time controller design method can be improved by usign the inveres bilinear transformation. The usefulness of the given method is confirmed by simulation.

• Journal of Electrical Engineering and Technology
• /
• 제9권5호
• /
• pp.1551-1561
• /
• 2014

Design, Simulation and experimental analysis of closed loop time domain based Discrete PWM buck-boost converter are described. To improve the transient response and dynamic stability of the proposed converter, Discrete PID controller is the most preferable one. Discrete controller does not require any precise analytical model of the system to be controlled. The control system of the converter is designed using digital PWM technique. The proposed controller improves the dynamic performance of the buck-boost converter by achieving a robust output voltage against load disturbances, input voltage variations and changes in circuit components. The converter is designed through simulation using MATLAB/Simulink and performance parameters are also measured. The discrete controller is implemented, and design goal is achieved and the same is verified against theoretical calculation using LabVIEW.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.348-352
• /
• 1993

A hybrid system contains both continuous variables and discrete event components. This paper presents the new control architecture for hybrid systems, which consists of a conventional controller for the continuous-time variable of the system, a supervisor for discrete event components of the system, and an interface for link between the controller and the plant. The presented controller is suitable for the system operating at the different operating conditions or for system being changing the plant model by enabling and disabling discrete events. This paper shows that the presented controller is better than the conventional controller.

• 전자공학회논문지S
• /
• 제34S권11호
• /
• pp.53-62
• /
• 1997

In this study, a controller design method is proposed for controlling the discrete-time chaotic systems efficiently. The proposed control method is based on Generalized Predictive Control and uses NARMAX models as controlled models. In order to evaluate the performance of the proposed method, a proposed controller is applied to discrete-time chaotic systems, and then the control performance and initial sensitivity of the proposed controller are compared with those of the conventional model-based controler through computer simulations. Through simulations results, it is shown that the control performance of the proposed controller is superior to that of the conventional model-based controller and shown that the peorposed controller is less sensitive to initial values of discrete-time chaotic systems in comparison with the conventional model-based controller.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권3호
• /
• pp.263-269
• /
• 1999

In this paper, an unifying design algorithm is presented for efficient digital implementation of continuous PID controller using general discrete orthogonal functions. The proposed algorithm is an algebraic method to determine controller parameters, which can unify controller design procedures divided into three ways. A set of linear equations for the controller design are derived from simple algebraic transformation based on general discrete orthogonal functions. By solving these equations, all of the controller parameters can be determined directly and simultaneously, which thus makes the design procedure systematic and straightforward. It does not involve any trial and error procedure, hence the difficulty of conventional approach can be avoided. The simulation results and discussions are given to demonstrate the efficiency of the proposed method.

• 제어로봇시스템학회논문지
• /
• 제4권5호
• /
• pp.579-584
• /
• 1998

This paper presents an efficient algorithm which determines the parameters of discrete PID controller. The proposed algorithm is an algebraic method to obtain controller parameters using ROM(Reduced Order Model), which can not only make design procedure simple but also reduce the computational burden required for controller implementation. Also, by solving a set of linear equations based on least squares method, the proposed method can make the controller design procedure systematic. Simple examples are given to demonstrate the effectiveness of our method when compared with widely-used conventional method.

• 드라이브 ㆍ 컨트롤
• /
• 제14권4호
• /
• pp.23-28
• /
• 2017

Time-delay control with internal model (TDCIM) is the controller for robot manipulators that applies the time-delay estimation and the concept of internal model control (IMC). TDCIM is robust against unknown dynamics and non-linear friction like coulomb friction and static friction. It is simple and computationally efficient. This study presents the relationship between the discrete TDCIM and the discrete PID controller. The PID controller is the most popular control law in the real application. But often the PID controller can be difficult to achieve the desired level of control performance. The result in this study provides a good candidate solution to these situations.

• 대한전자공학회논문지
• /
• 제25권3호
• /
• pp.262-268
• /
• 1988

In this paper conditions are derived, which ensure the existence of a quasi-sliding mode on the control switching hyperplane in discrete variable structure control systems and also remove the reaching phase problem observed in continuous-time variable structure systems. In addition, a discrete variable structure tracking controller which has adaptive properties is devised based on these results. This controller has useful properties, such as small sensitivity to the variation of plant parameters and to disturbances and its performing speed is fast compared to that of other adaptive controller.

• 전자공학회논문지SC
• /
• 제45권5호
• /
• pp.1-7
• /
• 2008

본 논문에서는 변수 불확실성을 가지는 이산시간 특이시스템과 곱셈형 섭동의 약성(fragility)을 가지는 제어기에 대한 강인 안정화 기법과 강인 비약성(non-fragile) 제어기 설계방법을 제시한다. 강인 안정화를 만족하는 비약성 제어기가 존재할 조건과 제어기 설계방법 및 제어기의 비약성 척도를 볼록최적화(convex optimization)가 가능한 선형행렬부등식 접근방법을 이용하여 제안한다. 최대의 비약성 척도를 얻기 위하여 구한 제어기 충분조건은 모든 변수의 견지에서 선형행렬부등식으로 변형한다. 따라서, 제안한 강인 비약성 이산 제어기는 특이시스템의 변수 불확실성과 제어기의 약성에도 불구하고 안정성을 보장한다 마지막으로, 수치예제를 통하여 제안한 알고리듬의 타당성을 확인한다.