• 한국안전학회지
• /
• 제22권1호
• /
• pp.36-39
• /
• 2007

It is important to know Minimum Ignition Energy(MIE) of flammable materials for ignition hazard of chemical processes etc.. Currently a capacitor discharge is used mainly to measure the MIE. Then, it is impossible to control actively discharge energies and discharge time because the MIE measurement uses a high voltage capacitor and fixed capacitor. However, the control of discharge energy and discharge time will be convenient if self-sustain discharge is used. In this paper, we measured the MIE by self-sustain discharge of a pulse shape to propose the new measuring method of the MIE. AS a result, ignition energies are increased gradually as discharge duration time gets longer, and discharge current grows larger. Also, an arc discharge and a glow discharge occurred during the experimental period, and the ignition by glow discharges happened when discharge duration time was $90{\mu}s$, discharge current was 8A and 1A Especially, the MIE occurred the 0.05mm and 0.08mm of the gap distance between discharge electrode in the same discharge duration time.

• 전기학회논문지
• /
• 제56권3호
• /
• pp.577-582
• /
• 2007

The plasma display panel is an image expression display using gas discharge plasma. However, gas discharge characteristics vary with temperature as gas discharge is sensitive to temperature. The discharge time lag extends a lot in low temperature and it is known as the cause which hinders high speed addressing which is essential for the size enlargement of the panel. Accordingly this research aims at identifying the temperature-dependent discharge characteristic. The lower temperature becomes, the longer addressing discharge time lag becomes. Particularly the statistical time lag extends much in low temperature. The increasing of electric field shortens discharge time lag in low temperature. Also, when priming particles are sufficiently supplied, stable discharge can be performed regardless of the influence of temperature.

• 한국기계가공학회지
• /
• 제4권3호
• /
• pp.5-12
• /
• 2005

In wire discharge machining which is using STD 11 as die materials, the major factors of machining speed are discharge voltage, discharge current, and discharge time. All of the three factors give the effect. Increasing of the discharge pulse time gets groove width wider and it relatively increases surface roughness and clearance. If no load voltage is decreased, surface roughness is good but it decreases machining speed. If on time is increased, machining speed will get faster and clearance and offset value also get bigger.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.224-227
• /
• 2002

The relationship between the discharge aging time and the superficial layer thickness of MgO thin film was investigated in an AC PDP. The discharge characteristics of an AC PDP with the various aging time were evaluated by discharge aging experiments. We find the presence of a superficial lay which is related to the discharge characteristics during aging process. The superficial layer of MgO thin film was observed by Transmission Electron Microscope (TEM). It was found that the superficial layer thickness of MgO was dependent on discharge aging time.

• 전기학회논문지
• /
• 제64권11호
• /
• pp.1587-1591
• /
• 2015

For a higher definition discharge cell, the method of high speed addressing is necessary. In order to modify the surface charges, the liquefied $TiO_2$ or MgO powder is added on MgO layer in front glass and on the phosphor in rear glass in micro barrier discharge. Both the electro-optical properties and the discharge time lag characteristics are measured from 4 inch. test panel, such as the discharge voltage, current, luminance, luminous efficacy and discharge time lag. As the results, the statistic time lag is improved by about 40 %.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1181-1184
• /
• 2007

The new self-priming addressing driving scheme was proposed to improve an address discharge time lag. It utilizes the priming effect maintaining the priming ramp discharge during an address period and the address discharge time lag is significantly improved. In this study, the basic characteristics of the priming ramp discharge are presented.

• 전자공학회논문지
• /
• 제52권1호
• /
• pp.135-139
• /
• 2015

플라즈마 디스플레이 패널의 각 부화면 시간동안 기입 방전의 지연시간을 각각 조사하였고 오방전이 발생하지 않는 범위내에서 추가 주사전압의 높이를 다르게 인가하여 모든 부화면 시간동안 기입방전 지연시간을 단축시키기 위한 수정된 구동방법을 제시한다. AC PDP에서 첫번째 초기화 기간 동안 주사전극에 높은 상승 경사파 전압을 인가하여 약한 플라즈마 방전이 발생하고 셀 내부에서 프라이밍 입자와 벽전하 생성을 유도한다. 생성된 벽전하는 셀 내부 벽전압이 되므로 기입기간 중 기입전압과 더해져서 기입 방전을 일으킨다. 그러나 셀 내부의 벽전하는 시간이 지나면서 점차 소멸되므로 1 TV 프레임 시간 동안 각 부화면 시간동안 기입방전은 늦게 발생한다. 첫 번째 부화면 시간에는 초기화 기간 동안 상승 경사파를 갖는 높은 전압에 의해 벽전하가 많이 남아 있으므로 첫 번째 기입 방전은 다른 부화면 시간보다 빠르게 형성된다. 한편, 두 번째부터 마지막 부화면 시간까지의 기입 방전 생성시간은 셀 내의 벽전하 소멸에 의하여 점차적으로 늦어진다. 본 연구에서는 각 부화면 시간동안 기입방전의 시간지연을 조사하였고, 부화면 시간의 기입기간 마다 추가 주사전압을 다르게 인가하여 전체 기입방전지연시간을 단축시켰다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.613-616
• /
• 2007

Characteristics of dark image retention and address discharge time lag were investigated simultaneously. It was found that reset waveforms with low black luminance did not guarantee lower image retention. Improved address discharge time lag due to modified reset waveforms similarly did not show improved image retention. The address discharge time lag and the image retention are in a trade-off relation.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1997년도 제13회 학술발표회 논문개요집
• /
• pp.173-176
• /
• 1997

A numerical analysis of the micro-discharge in an AC pplasma dispplay cell has been made using time-deppendent, 2-dimensional multi-fluid equations to understand the discharge pphysics of He-Xe discharge. The time deppendent distribution of the electron tempperature, densities of electrons, various ions and excited sppecies, and the effects fo the wall charge accumulated on the dielectric surface are obtained and comppared with the results of direct observation of time deppendent behavior of VUV and visible sppectra from single discharge cell observed using a gated, image intensified CCD to elucidate the discharge physics.

• 조명전기설비학회논문지
• /
• 제21권1호
• /
• pp.28-34
• /
• 2007

본 연구에서는 새로 고안된 방전 논리 게이트 PDP의 논리 게이트 입력인 DC 방전특성에 대해 고찰하였다. 새로 고안된 방전 논리 게이트는 방전 경로에 따른 전극사이의 전위차를 제어하여 논리 출력을 유도한다. 실험결과 이 DC 방전들의 안정성을 위해 프라이밍 방전을 인가한 경우가 인가하지 않은 경우에 비해 방전지연시간이 1/3로 단축되며 방전개시전압은 1/2로 감소하였다. 또한 이 프라이밍 방전에서 발생한 공간전하는 방전종료 후 $30[{\mu}s]$ 정도까지 영향을 미친다. 그리고 시간적, 공간적 거리변화에 파라 공간전하가 DC 방전에 미치는 영향을 측정한 결과, 주 방전에서부터 시간적으로 멀어지는 것보다 공간적으로 멀어지는 것이 주 방전의 영향에서 쉽게 벗어날 수 있음을 알았다. 그러므로 각 주사전극 마다 방전 논리 게이트들을 독립적으로 동작시킬 수 있다는 결론을 얻었다.