• 분석과학
• /
• 제15권6호
• /
• pp.502-508
• /
• 2002

관통형 속빈 음극관 글로우 방전 (See-through hollow cathode glow discharge)셀을 이용한 미량 및 극미량 분석을 가능한 분광 분석 장치를 개발하였다. 이 장치는 기존의 관통형 속빈 음극관 글로우 방전 셀을 개선하기 위하여 수냉식 냉각 장치를 부착한 새로운 방전 셀의 형태로 개발하였다. 기존의 방전 셀로 미량 및 극미량 분석은 가능하였지만, 공랭식 냉각장치로도 플라즈마의 온도를 높이는 데 한계가 있으며, 단 시간에 플라즈마가 불안정해지는 문제점이 발생하였다. 이러한 문제점을 개선하기 위해서 본 장치에서는 수냉식 냉각 방식을 채택하여 플라즈마의 안정성을 높였으며, 플라즈마 온도를 증가시킬 수 있다. 개선된 방전 셀의 기초 연구를 위해 속빈 음극관의 재질 및 구경변화에 따른 방전 전력 및 압력에 관련한 연구를 하였으며, 속빈 음극관의 구경의 변화에 따른 플라즈마 온도 변화에 대해 측정하였다.

• 에너지공학
• /
• 제15권1호
• /
• pp.52-59
• /
• 2006

본 연구에서는 배리어 방전을 이용한 메탄전환 반응에서 수소 및 다른 탄화수소류 화합물의 생성율과 분포에 관하여 알아보았다. 반응기의 외부전극과 내부전극은 SUS로 만들어진 원통형을 사용하였으며, 배리어 방전을 일으키기 위해서 전극 사이에 알루미나 튜브를 사용하였다. 전환된 메탄으로부터 다양한 생성물을 얻기 위해서 유입가스의 조성, 유량변화, 주파수 및 전압을 변화시켜 주면서 실험하였다. 플라즈마 반응에 의한 주요한 생성물들은 에틸렌, 에탄, 프로판, 부탄, 수소, 일산화탄소, 그리고 이산화탄소 등으로 나타났다. 비활성 가스의 사용과 인가전압의 증가에 의해서 메탄 전환율 및 탄화수소류의 선택도가 향상되었다. 유입가스 내에 수증기의 첨가로 인해서 메탄의 전환율 및 수소의 수율이 증가되었다. 수증기 첨가 반응에서 에탄, 프로판 그리고 부탄은 더 높은 전압을 인가하였을 때 수율이 증가하였으며, 아세틸렌과 에틸렌은 보다 낮은 전압에서 수율이 증가함을 알 수 있었다.

• 한국수자원학회논문집
• /
• 제33권6호
• /
• pp.765-774
• /
• 2000

본 연구는 수계규모에서 과거의 수원공 운영자료를 이용하여 농업용 저수지, 취입보 및 관정 등으로부터 논 관개지구에 공급된 농업용수 공급량의 조사방법을 개발하는 데 그 목적이 있다. 농업용 저수지에 의해 공급된 관개량은 일별 혹은 순별 저수율 자료와 DIROM 모형을 이용하여 추정하였으며, 일별 양수량은 연간 총양수량으로부터 일별 양수패턴을 적용하여 산정하였다. 관정에 의해 취수된 일별 공급량은 논벼의 조용수량과 관정의 설계유량을 고려하여 계산하였으며, 취입보의 일별 공급량은 관개지구의 조용수량, 하천 유량 및 설계취수량 중에서 최소 유량으로부터 구하였다. 1993~1997년의 조사 기간동안에 한강수계에서 공급된 농업용수는 $569백만\;\textrm{m}^3/년부터\;709백만\;\textrm{m}^3/년$의 범위를 보였으며, 5개년 평균 공급량은 $640백만\;\textrm{m}^3/년$이었다.

• 전기학회논문지
• /
• 제58권12호
• /
• pp.2446-2452
• /
• 2009

A Ceramic Metal-halide lamp is achieved by adding multiple metals to a basic mercury discharge. Because the vapor pressure of most metals is very much lower than mercury itself, metal-halide salts of the desired metals, having higher vapor pressures, are used to introduce the material into the basic discharge. The metal compounds are usually polyatomic iodides, which vaporize and subsequently dissociate as they diffuse into the bulk plasma. Metals with multiple visible transitions are necessary to achieve high photometric efficiency and good color. Compounds of Sc, Dy, Ho, Tm, Ce, Pr, Yb and Nd are commonly used. The maximum visible efficacy of a Ceramic Metal Halide lamp, under the constant of a white light source, is predicted to be about 450lm/W. This is controlled principally by the chemical fill chosen for a particular lamp. Current these lamps achieve 130lm/W and these life time are the maximum 16,000[hr]. So factors of performance lower are necessary to improve lamp performance. In this paper, we analyzed factors of performance lower by accelerated deterioration test. The lamp was operated with short duration turn-on/turn-off procedure to enhance the effect due to electrode sputtering during lamp ignition. The tested lamp that was operated with a longer turn-on/off(20/20 minutes) showed blackening, changed distance between electrodes and lowered color rendering & color temperature by losses of Dy at 421.18nm, I at 511nm, T1 at 535nm and Na at 588nm compared with the new lamp.

• 대한한의학회지
• /
• 제22권3호
• /
• pp.42-50
• /
• 2001

Objectives : Dysphagia is common and severe problems of acute stroke determining the prognosis of stroke only second to mental change, and results in secondary fatal complications such as aspiration pneumonia, malnutrition, dehydration, etc. Therefore, we were to investigate the clinical characteristics of dysphagia accompanied by acute ischemic stroke. Methods : We selected subjects through clinical notes retrospectively, whose main problems included dysphagia resulted from acute stroke within 72 hours from onset who were admitted to the Internal Medicine Department of Wonkwang Oriental Medicine Hospital from Jan. 2000 to Apr. 2001. We assessed the severity of dysphagia from admission to discharge using a staging method : stage 0 is normal without dysphagia, stage 1 is nearly normal except for intermittent dysphagia, stage 2 is compensated abnormal swallowing requiring adjusted diets or delayed feeding time, stage 3 is uncompensated abnormal swallowing resulted in weight loss down to 10% of initial and daily aspiration, coughing, and vomiting, stage 4 is uncompensated abnormal swallowing resulting in weight loss beyond 10% and recommended for non-oral feeding, and stage 5 is 100% non-oral feeding by L-tube, or gastrostomy or NPO state. Results : Dysphagia was improved statistically significantly from the mean stage of $3.6{\pm}0.29$ on admission to $1.88{\pm}0.32$ on discharge (P<0.05). On average $7.1{\pm}1.48$ days were required for improving more than one stage level. As patients were older and the stage of dysphagia was worse on admission, severity of dysphagia was more difficult to improve (correlation coefficiency was 0.55 and 0.77 respectively, P<0.05). Aspiration pneumonia was complicated in 13 patients of the total 25 at mean dysphagia stage of $3.36{\pm}0.37$. However, any specific values such as lesion size, lesion site, sex, age, past history and NIH Stroke Scale on admission did not affect it (P>0.05). Conclusion : Clinical course of dysphagia was determined about I week from the onset. Aspiration pneumonia was mainly complicated during oral feeding periods. If there were no improvement of dysphagia over 2-3 weeks, then non-oral feeding such as Levin tube or gastrostomy must be considered.

• 한국산업융합학회 논문집
• /
• 제25권3호
• /
• pp.443-449
• /
• 2022

In this study, in order to improve the disadvantages of the environmental error of the infusion set that performs infusion therapy in the existing clinical practice and to maximize the user's convenience by miniaturizing the existing infusion pump system, the structure of the muscle pump of the human vein was imitated. As a double check valve method, a method for preventing the backflow of fluid and discharging a constant fluid in one direction by external pressure was proposed. The proposed bio-mimic muscle pump uses a check valve that controls the flow of fluid in one direction and a silicone tube with elasticity, and a chamber is constructed. A peristaltic pump for applying intermittent pressure to the tube chamber was constructed using a multi-cam structure roller. In order to verify the performance of the proposed pump, optimization was performed while changing the number of multi-cam rollers and adjusting the speed of the roller driving motor, and the reproducibility of the instantaneous discharge amount and the continuous discharge amount of the pump was compared and tested. The performance of the muscle pump proposed in this study was verified through experiments that it can inject up to 1L of fluid within 12 hours, and that it is possible to inject the fluid with an accuracy of ±0.1ml. Real-time monitoring of the fluid injection volume through the bio-mimic muscle pump proposed in this study not only increases the convenience of the administrator, but also provides a precise fluid administration environment to more patients at a low cost, and additionally applies bubble detection and occlusion detection technology If so, it is believed that a safer medical environment can be provided to patients.

• 물과 미래
• /
• 제28권5호
• /
• pp.151-162
• /
• 1995

자연하천에서 오염물질의 횡확산과정은 정확하게 모의하기 위하여 2차원 유관확산모형을 개발하였다. 본 모형에서는 독립변수로서 횡방향거리 대신에 횡방향누가유량을 도입하였고, 하천의 주흐름을 따라 좌표축을 설정하는 자연좌표계를 사용하였다. 유도한 유관확산방정식을 풀기 위한 수치방법으로서 Eulerian-Lagrangian method를 이용하였다. 유관확산방정식을 연산자분리방법을 이용하여 이송을 지배하는 방정식과 확산을 지배하는 방정식으로 분리하였다. 그리고 이송방정식은 Eulerian 계산격자상에서 특성곡선법을 이용하였고 확산방정식은 중앙차분법을 이용하여 수치모의 하였다. 본 연구에서는 이송방정식의 풀이에서 사용되는 보간다항식으로 cubic spline 보간다항식을 이용하였다. 본 연구에서 개발한 모형을 적용하여 실제 자연하천에서 행해진 정상상태의 색소실험 결과를 모의한 결과개발된 모형이 우수한 거동을 보이고 있음이 밝혀졌다.

• 대한기계학회논문집A
• /
• 제25권3호
• /
• pp.510-519
• /
• 2001

The tensile and fracture toughness tests have been conducted to investigate the degradations of mechanical properties induced mainly by neutron irradiations in Zr-2.5Nb CANDU pressure tube materials operated in Wolsung Unit-1. the tests were performed at room, 150, 200, 250, 300 $\^{C}$ for the irradiated and unirradiated specimens in hot cell. The specimens were directly machined from the tube retaining original curvature using specially designed electric discharge machine(EDM). From the tensile tests of the irradiated specimens, it was found that tensile strength was increased and total elongation was decreased compared to those of the unirradiated ones. The active voltages in the fracture toughness tests for the irradiated showed the discontinuous abrupt increases caused by crack jumping in lower temperature. In the crack resistance curves we found the stable crack growth in the unirradiated, whereas the unstable and three crack growth stages in the irradiated specimens due to the accumulated irradiation defects. The various fracture characteristic values in the irradiated are remarkably lower than those of the unirradiated. Through the fractography, we found in the irradiated that smaller dimple and shorter fissures than the unirradiated, and that the fractured surface had three regions that were flat, transition and slant/shear area. These can explain the difference in the crack growth characteristic values of the irradiated and the unirradiated ones.

• 한국광학회지
• /
• 제17권1호
• /
• pp.60-67
• /
• 2006

본 논문에서는 I자형과 U자형의 변압기를 각각 사용한 펄스형 고전압 전원에 의해 대기압에서 동작되는 파장 337.1 nm인 질소레이 저의 방전간극과 레이저 관에 각각 광섬유를 설치하고, 이를 통해 나오는 빛을 핀 다이오드를 이용하여 선전리 현상을 직접 관측하고 출력특성을 조사하였다. 레이저 출력이 안정되고 높아질수록 선전리 현상을 뚜렷이 관측할 수 있었고, 레이저 출력은 I자형 변압기보다는 U자형의 변압기를 사용하였을 때 높은 출력과 안정성을 얻었으며, 또한 펄스 방전의 예비동작 시간도 U자형이 1/3 정도 짧았다. U자형의 변압기를 사용하고 출력창의 반사율 $40\%$, 반복율 10 Hz, 레이저 관내에서 질소기체의 유동률이 4 ${\iota}$/min, 방전간극 내에서 질소기체의 유동율이 1500 cc/min, 방전간극 전극 거리 3.0 mm, 레이저 관 내 전극거리 5.0 mm 일 때, 안정성이 $2.7\%$인 $36{\mu}J$의 출력을 얻었다.

• Applied Science and Convergence Technology
• /
• 제26권5호
• /
• pp.118-128
• /
• 2017

The scope of this work is to determine and compare the effect of electron temperature ($T_e$) and number density ($N_e$) on the yield rate and concentration of reactive chemical species ($^{\bullet}OH$, $H_2O_2$ and $O_3$) in an argon, air and oxygen injected negative DC (0-4 kV) capillary discharge with water flow(0.1 L/min). The discharge was created between tungsten pin-to pin electrodes (${\Phi}=0.5mm$) separated by a variable distance (1-2 mm) in a quartz capillary tube (2 mm inner diameter, 4 mm outer diameter), with various gas injection rates (100-800 sccm). Optical emission spectroscopy (OES) of the hydrogen Balmer lines was carried out to investigate the line shapes and intensities as functions of the discharge parameters such as the type of gas, gas injection rate and inter electrode gap distances. The intensity ratio method was used to calculate $T_e$ and Stark broadening of Balmer ${\beta}$ lines was adopted to determine $N_e$. The effects of $T_e$ and $N_e$ on the reactive chemical species formation were evaluated and presented. The enhancement in yield rate of reactive chemical species was revealed at the higher electron temperature, higher gas injection rates, higher discharge power and larger inter-electrode gap. The discharge with oxygen injection was the most effective one for increasing the reactive chemical species concentration. The formation of reactive chemical species was shown more directly related to $T_e$ than $N_e$ in a flowing water gas injected negative DC capillary discharge.