• Journal of the Society of Disaster Information
• /
• v.18 no.3
• /
• pp.660-671
• /
• 2022

Purpose: This study is intended to confirm the business disruptive risk in the Serious Accidents, and propose a plan to comply with the Serious Accidents Punishment Act through the Disaster Mitigation Activity Management System. Method: Through literature review and case studies, the requirements and characteristics of each of the Serious Accidents Punishment Act, the Disaster Mitigation Activity Management System, and ISO 45001 were compared and analyzed, and implications were derived. Result: The business disruption and financial adverse effects caused by industrial accidents were identified. Based on this and by using the Disaster Mitigation Activity Management System, measures to link the documentation requirements of the the Serious Accidents Punishment Act to the Disaster Mitigation Activity Management System, and to manage the implementation records of the Serious Accidents Punishment Act's duty were derived. Conclusion: When establishing and operating the Disaster Mitigation Activity Management System, it can not only comply with the Serious Accidents Punishment Act but also contribute to maintaining business continuity and ESG management through the prevention of various disasters and the minimization of secondary damage, etc.

• International Journal of Advanced Culture Technology
• /
• v.7 no.4
• /
• pp.163-171
• /
• 2019

Purpose: Purpose: The National Safety Experience Center Establishment and Reinforcement Project Management Guidelines, established to build a national safety experience center that is central to practicing education on disasters and safety accidents, requires that appropriate experience training programs be in place. However, due to the lack of classification grounds for the six areas of disaster•safety accidents presented by the Ministry of Public Administration and Security, and the mortality statistics necessary for establishing sectors have accumulated for over a decade, they are based on this. Our purpose is to standardize classification of sectors belonging to each area. Methods: We will divide disaster•safety accidents into 6 areas by three steps, and the grounds for 6 areas of accidents are presented. The 15 external causes other than the disease since 2009 has been proposed by The National Statistical Office. Therefore on the basis of these causes, various sectors belonging to each area are classified. Results: We will divide all disaster•safety accidents into six areas through three logical separation stages, and the areas were systematically classified based on the 15 factors of death. In conclusion, we present the grounds for the classification criteria in the six areas, the transportation accident disaster area in three areas, the social infrastructure system area in four areas, the crime accident disaster area in four areas, the life safety accident area in four areas, we set up all disaster•safety accidents in six areas and finally standardize total 25 areas.

• International journal of advanced smart convergence
• /
• v.10 no.3
• /
• pp.245-256
• /
• 2021

This study is significant in determining the reduction of safety accidents by applying PDCA's theory by subdividing it into a case analysis technique for construction sites by PDCA's theory. For this study, accidents accounted for the largest proportion of each type of disaster in the construction site were considered, and safety accidents were reduced through the PDCA theory through prior research. The analysis method of this study derived improvement plans by applying PDCA techniques to plan, implement, confirm, review, and improve disaster accidents at construction sites. The conclusions of this study are as follows. In the plan, first of all, measures shall be taken to prepare a safety management plan, to verify the implementation of the plan, and to verify the degree of implementation by the field manager. In the implementation, first of all, it is necessary to introduce a safety education history system to strengthen the safety education curriculum to suit the site, as long-term work is impossible for field workers depending on field conditions. First of all, it is necessary to strengthen the installation of safety facilities, including "work scaffolding" and "conducting prevention facilities" at construction sites. In management review and improvement, the risk assessment system for construction sites needs to be expanded first°.

• Journal of the Society of Disaster Information
• /
• v.5 no.2
• /
• pp.140-152
• /
• 2009

Recently the occurrence ratio of mechanical accidents in industrial disaster of korea is increased, but very little accident information has been given regarding the prevention of mechanical accidents. In this study, mechanical accidents by the analysis of industrial accident case was examined. And it was proposed the risk assessment method and building database for investigation of risk factors in mechanical accident. As a result, from mechanical accidents database, it was found that the occurrence ratio of mechanical accident by constriction and falling etc. is very high and death ratio by mechanical accident is larger than that of usual accident. And we applied the quantitative risk assessment method proposed by this study in the mechanical accident analysis of a domestic manufacturer. From the results, the risk factors due to constriction, curling, falling and scattering are principal causes of mechanical accidents. These result is similar to that of the analysis of mechanical accidents for recent 12 years in korea.

• Journal of the Society of Disaster Information
• /
• v.11 no.4
• /
• pp.467-474
• /
• 2015

This study is about the demand survey of R&D for preventing disaster and safety accidents. The results are as follows. First, the priorities of technology development is shown in the following order: natural disasters, human and social disaster, and safety accidents. Second, the amount of R&D investment is shown in the following order in respect of disaster management phase: prevention, preparedness, response and recovery. However, investment in the recovery phase was low. Third, it was concentrated on some types the demands of technological development in the public sector. There is a possibility of duplication of technology development in government investment. Suggest that interagency cooperation is required.

• Journal of the Society of Disaster Information
• /
• v.12 no.3
• /
• pp.273-278
• /
• 2016

In this study, we set the need, purpose, and the direction of developments in life-saving devices and analyzed the disaster sites where power-assisted devices are to be applied. For this purpose, we classified the disaster in accordance with the Basic Law for on Disaster and Safety Management and analyzed the common disaster sites where power-assisted devices are available. As a result, 13 disaster sites were classified into three categories. Firstly, 8 sites of social disaster accidents, fire(suppression), fire(rescue), collapse, traffic accidents, explosion, CBR(chemical, biological, and radiological), environment pollution, and other safety accidents, were defined. Secondly, 4 disaster accidents, earthquake, flood, typhoon and other natural disasters, were classified. Finally, other disaster sites were taken into account.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.1
• /
• pp.71-82
• /
• 2018

The purpose of this study is to minimize damage of chemical accidents through the appropriation analysis of evacuation facility position focused on Ulsan metropolitan city. For analysis, informations such as pollutant release and transfer registers(PRTR), population census, and evacuation facilities were used. After then, damage assessment of chemical accidents, accessibility and appropriation of evacuation facilities were analyzed. Damage of chemical accidents is high in around 5km of industrial complex there is dense of chemical facility and population. Evacuation facilities were mainly situated in hazard area of chemical accidents, but accessibility of evacuation facilities was vulnerable in chemical plant neighborhood. Therefore, safety check of deteriorated plants is important for prevention of chemical accidents. Also, effective evacuation plan considering capacity and scale of evacuation facilities will be established.

• Journal of the Society of Disaster Information
• /
• v.19 no.2
• /
• pp.421-431
• /
• 2023

Purpose: The purpose of this study is to analyze the safety and disaster prevention effects of the Smart Safety System used to prevent safety accidents in construction machinery and demonstrate its safety. Method: Among construction machines, the behavioral patterns of workers according to the presence or absence of a smart safety system were analyzed for excavators with high risk and frequent accidents. Result: When the smart safety system was installed in the construction machine, the safety of workers from accidents caused by constriction and collision with the construction machine was secured. Conclusion: It is judged that the smart safety system installed in construction machinery can increase the effectiveness of disaster reduction and major disaster prevention related to construction machinery.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.25-36
• /
• 2021

This study analyzed the causes of flood accidents, such as isolation and lost footing accidents in Dorimcheon, to provide legal and institutional improvements. For cause analysis, Field Investigation, Stakeholder Interview, Report, manual, Law et al. Review, Analysis of water level change characteristics, automatic alarm issuance standard level analysis, and evacuation time according to river control were evaluated. Dorimcheon has the characteristics of a typical urban river, which is disadvantageous in terms of water control. In addition, the risk of flood accidents is high because the section where fatal accidents occur forms sharply curved channels. Tripping and isolation accidents occur in the floodplain watch and evacuation stage, which is the stage before the flood watch and warning is issued. Because floodplain evacuation is issued only when the water level rises to the floodplain, an immediate response according to the rainfall forecast is essential. Furthermore, considering that the rate of water level rise is up to 2.62 cm/min in Sillimgyo 3 and Gwanakdorimgyo, sufficient evacuation time is not secured after the floodplain watch is issued. Considering that fatal accidents occurred 0.46 m below the standard water level for the flood watch, complete control is very important, such as blocking the entry of rivers to prevent accidents. Based on these results, four improvement measures were suggested, and it is expected to contribute to the prevention of Tripping and Isolation Accidents occurring in rivers.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.4
• /
• pp.41-51
• /
• 2014

Share of total accidents in construction accidents construction site accident 70% of small embroidery Reducing the rate of Construction of the entire construction accidents decreased overall is a very meaningful work. Disaster reduction continues to increase despite the efforts of a small construction site(Amount less than 2,000,000,000) for Disaster Reduction In order to identify more clearly the cause of the system and provide the urgently needed measures.