• 한국수학교육학회지시리즈A:수학교육
• /
• 제63권3호
• /
• pp.451-466
• /
• 2024

본 연구는 학교 수학에서 다소 모호한 개념을 보이는 모선에 대한 초등 예비교사들의 인식을 조사하였다. 예비교사의 모선에 대한 인식은 '원뿔에만 모선이 있다는 인식', '원뿔과 원기둥에만 모선이 있다는 인식', '회전체에 모선이 있다는 인식', '옆면에 있는 직선이 모선이라는 인식'의 4가지 유형으로 크게 구분되었다. 원뿔에만 모선이 있다는 인식은 전체 예비교사의 22.1%로, 이 유형의 예비교사들은 초등학교 교과서에 제시된 모선의 정의를 대부분 따르고 있었다. 원뿔과 원기둥에만 모선이 있다는 인식은 가장 낮은 비율로 조사된 유형이었지만, 도선을 이용한 방법으로 모선을 정의한 사례가 있었다는 점에서 원뿔대의 모선과 같은 심화된 내용을 고안할 필요가 있었다. 회전체에 모선이 있다는 인식은 전체 예비교사의 27.9%로, 이 유형의 예비교사들은 구에 모선이 있는지에 대한 의견이 나뉜다는 특징이 있었다. 옆면에 있는 직선이 모선이라는 인식은 가장 높은 비율로 조사된 유형으로, 도선을 이용한 방법을 함의하여 모선을 정의한다는 점에서 학교 수학의 관점과는 차별화된 인식을 보였다. 이와 같은 연구 결과를 바탕으로 예비교사의 교과 내용 지식과 교수학적 내용 지식을 고려한 구체적인 교사교육 방안을 마련하였다. 나아가 수학교육 관점에서 합의된 모선의 정의를 제안하였다.

• Structural Engineering and Mechanics
• /
• 제32권2호
• /
• pp.321-335
• /
• 2009

When a roof frame is subjected to the airblast loading, the conventional way to analyze the damage of the frame or design the frame is to use single degree of freedom (SDOF) model. Although a roof frame consists of beams and girders, a typical SDOF analysis can be conducted only separately for each component. Thus, the rigid body motion of beams by deflections of supporting girders can not be easily considered. Neglecting the beam-girder interaction in the SDOF analysis may cause serious inaccuracies in the response values in both Pressure-Impulse curve (P-I) and Charge Weight-Standoff Diagrams (CWSD). In this paper, an inelastic two degrees of freedom (TDOF) model is developed, based on force equilibrium equations, to consider beam-girder interaction, and to assess if the modified SDOF analysis can be a reasonable design approach.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.461-462
• /
• 2006

A single-gap and single-gamma transflective liquid-crystal (LC) display using patterned vertical alignment (PVA) mode was designed. In the device, a vertical electric field drives a vertically aligned LC to tilt down to optimize polarization efficiency. Electrodes of transmissive and reflective area were patterned $22.5^{\circ}$ and $45^{\circ}$ with respect to the polarizer so that a tilt-down direction of the LC director was $22.5^{\circ}$ and $45^{\circ}$ in the reflective and transmissive regions, respectively. In the device, the cell gap was the same for both regions, and the gamma curve matched each other in both regions because tilt angle of LC director was the same according to the applied voltage. Moreover, the dark state was irrespective of the cell retardation value at normal direction, which was highly important in massive fabrications. The switching principle and electro-optic characteristics of the device are reported herein.

• Journal of Mechanical Science and Technology
• /
• 제18권10호
• /
• pp.1700-1711
• /
• 2004

Piston friction is one of the important but complicated sources of energy loss of a hydraulic axial piston machine. In this paper, two formulas are derived for estimating instantaneous piston friction force and average piston friction moment loss. The derived formula can be applicable for piston guides with or without bushing as well as for axial piston machines of motoring and pumping operations. Through the formula derivation, a typical curve shape of friction force found from several experimental measurements during one revolution of a machine is clearly explained in this paper that it is mainly due to the equivalent friction coefficient dependent on its angular position. Stribeck curve effect can easily be incorporated into the formula by replacing outer and inner friction coefficients at both edges of a piston with the coefficient given by Manring (1999) considering mixed/boundary lubrication effects. Novel feature of the derived formula is that it is represented only by physical dimensions of a machine, hence it allows to estimate the piston friction force and loss moment of a machine without hardworking experimental test.

• 동력기계공학회지
• /
• 제18권6호
• /
• pp.45-50
• /
• 2014

In the previous paper, we have reported on the development of foaming sponge seat with the auxiliary spring member and suggested new possibility of the special seat with the auxiliary plastic member for movie theater chair. In this study, we have examined the major design parameters needed in the development of a foaming sponge seat in which the mesh type plastic member are inserted to improve the vibration transfer effect of a chair seat. Through analyzing several prototypes by applying experimentation as well as the experimental modal analysis method, it was confirmed that the effect of vibration transfer can be improved through the use of a mesh type plastic member and applied to the design of practical chair seat.

• Journal of Mechanical Science and Technology
• /
• 제18권1호
• /
• pp.92-105
• /
• 2004

A new algorithm for planning a collision-free path based on algebraic curve is developed and the concept of collision-free Path Space (PS) is introduced. This paper presents a Geometry Mapping (GM) based on two straight curves in which the intermediate connection point is organized in elliptic locus ($\delta$, $\theta$). The GM produces two-dimensional PS that is used to create the shortest collision-free path. The elliptic locus of intermediate connection point has a special property in that the total distance between the focus points through a point on ellipse is the same regardless of the location of the intermediate connection point on the ellipse. Since the radial distance, a, represents the total length of the path, the collision-free path can be found as the GM proceeds from $\delta$=0 (the direct path) to $\delta$=$\delta$$\_$max/(the longest path) resulting in the minimum time search. The GM of elliptic workspace (EWS) requires calculation of interference in circumferential direction only. The procedure for GM includes categorization of obstacles to .educe necessary calculation. A GM based on rectangular workspace (RWS) using Cartesian coordinate is also considered to show yet another possible GM. The transformations of PS among Circular Workspace Geometry Mapping (CWS GM) , Elliptic Workspace Geometry Mapping (EWS GM) , and Rectangular Workspace Geometry Mapping (RWS GM), are also considered. The simulations for the EWS GM on various computer systems are carried out to measure performance of algorithm and the results are presented.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제19권3호
• /
• pp.134-141
• /
• 2014

A testing inspection is one of the important in the industry, owing to determine the reliability and directivity of testing inspection results. Therefore, the quality assurance and quality control (QA/QC) work which performed by personnel not directly in the inventory compilation development, in testing inspection must be thoroughly considered. Some agencies for environmental test inspection, they sometimes misunderstood that the QA/QC was ended with proficiency testing performance and on-site assessment by a director. Thus, results were often calculated without QA/QC work by self manual when conducting test. The objective of this study was to improve reliability of testing and inspection agency through the QA/QC case study which basically performed to raising reliability of testing and inspection agency. In this study, it increased reliability of result by verifying calibration curve (IC, ICV, CCV), blank, accuracy (LCS, MS) and precision as QA/QC performance, while performing investigation of soil contamination in mining areas. This study suggests that reliability establishing method of test result and management method of analysis process, through the QA/QC instance of testing agency.

• 분석과학
• /
• 제24권1호
• /
• pp.10-14
• /
• 2011

먹는 물 중 bromide의 국내 외 시험방법에 대한 분석 조건을 비교하여 최적 시험조건을 확인하고 ion chromatograph-suppressed conductivity detector (IC-CD)를 사용하여 먹는 샘물 및 지하수 원수 중 bromide 함량을 분석하였다. 지하수 원수 중 bromide농도와 먹는 샘물 중 bromide 및 bromate 의 농도 합과의 상관관계를 조사하였다. 시료 전처리를 위해 먹는 샘물 20 mL를 온가드 Ba-, H-카트리지 순서대로 통과시키고 마지막에 $0.2\;{\mu}m$ 맴브레인 필터로 여과 하였다. 여과한 시료는 IC-CD에 주입하였으며, 시료 중 bromide는 10~50 mM의 수산화이온용액 이동상에 적합한 가드 및 분석용 컬럼인 AG 19 및 AS 19에 의해 분리하였다. Bromide의 검정 곡선은 $0.5\sim80\;{\mu}g/L$의 농도 범위에서 $r^2$값이 0.9993으로 좋은 직선성을 보였으며, 검출한계(MDL) 및 정량한계(LOQ)는 각각 0.2, $0.5\;{\mu}g/L$이었다. 실제 먹는 샘물 23 개와 먹는 샘물 공장의 지하수 원수 75 개의 시료 중 bromide를 분석한 결과, 각각 평균농도는 $14.7\;{\mu}g/L$, $20.4\;{\mu}g/L$이었다. 지하수 원수 중 bromide농도와 먹는 샘물 중 bromide 및 bromate의 농도 합과의 상관계수(r)는 0.808이었다.