• Journal of the Korean Vacuum Society
• /
• v.6 no.S1
• /
• pp.59-65
• /
• 1997

Efficient Si(100) etching by thermal H atoms at low substrate temperatures has been achieved. Gas-phase etching product $SiH_4$(g) upon H atom bombardment resulting from direct abstraction of $SiH_3$(a) by impinging H atoms was detected with a quadrupole mass spectrometer over the substrate temperature range of 105-408 K Facile depletion of all surface silyl ($SiH_3$) groups the dissociative adsorption product of disilane ($Si_2H_6$) at 105K from Si(100)2$\times$1 by D atoms and continuous regeneration and removal of $SiD_3$(a) were all consumed. These results provide direct evidence for efficient silicon surface etching by thermal hydrogen bombardment at cryogenic temperatures as low as 105K We attribute the high etching efficiency to the formation and stability of $SiH_3$(a) on Si(100) at lowered surface temperatures allowing the $SiH_3$(a) abstraction reaction by additional H atom to produce $SiH_4$((g).

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.1 s.45
• /
• pp.25-32
• /
• 2007

In this paper, the abstract layer for motion capture system is designed and implemented to meet the various hardware and different capturing method. The abstract layer can offer the unified programming by providing device independent API(Application Programming Interface). The device drivers of the optical system and mechanical system are emulated to verify the designed abstract layer. The optical system employs the AOA Ole while the mechanical system uses BVH file. An application program is written to call the abstract layer functions to drive both optical and mechanical drivers and receive the frame data, simulated motion data, that are displayed sequentially on the computer screen by utilizing Direct3D.

• Transactions of Materials Processing
• /
• v.22 no.6
• /
• pp.334-339
• /
• 2013

Direct Laser Melting is a prototyping process whereby a 3-D part is built layer wise by melting the metal powder with laser scanning. This process is strongly influenced by the shielding gas and the laser operating parameters such as laser power, scan rate, layering thickness, and rescanning. The shielding gas is especially important in affecting the microstructure and mechanical properties. In the current study, fabrication experiments were conducted in order to analyze the effect of shielding gas on the forming characteristics of direct laser melting. Cylindrical parts were produced from a Fe-Ni-Cr powder with a 200W fiber laser. Surface quality, porosity and hardness as a function of the layering thickness and shield gas were evaluated. By decreasing the layering thickness, the surface quality improved and porosity decreased. The selection of which shield gas, Ar or $N_2$, to obtain better surface quality, lower porosity, and higher hardness was examined. The formability and mechanical properties with a $N_2$ atmosphere are better than those parts formed under an Ar atmosphere.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.8
• /
• pp.869-874
• /
• 2014

It is possible to fabricate a three-dimensional (3D) shape using the solid freeform fabrication (SFF) technology. However, there are several problems in applying conventional SFF technologies to the direct manufacturing of a product. Hence, multimaterial SFF is gaining attention. Moreover, a 3D circuit device that is different from a conventional two-dimensional PCB can also be fabricated using multimaterial SFF. In this study, a hybrid system using fused deposition modeling and direct writing was designed for 3D circuit device fabrication.

• Journal of Environmental Science International
• /
• v.18 no.12
• /
• pp.1325-1330
• /
• 2009

The fumigant 1,3-dichloropropene (1,3-D) was recently proposed as a direct replacement for methyl bromide ($CH_3Br$) in soil fumigation. This study was conducted to better understand behavior phase partitioning, diffusion and volatilization of 1,3-D as affected by isomer. The Henry's law constant(KH) of cis-1,3-D and trans-1,3-D was 0.058 and 0.037 at $20^{\circ}C$, respectively. $K_H$ of cis form of 1,3-D was higher than that of trans form of 1,3-D. To compare with volatilization of 1,3-D isomer, soil column [70 cm (length)${\times}$12 cm (i.d.)] included a shank injection at 30 cm with 300 kg $ha^{-1}$. Maximum cis-1,3-D and trans-1,3-D concentration reached 57 mg $L^{-1}$ and 39 mg $L^{-1}$ at 30 cm depth at 1h after application. Cumulatively, after 10 days, 51.8% and 43.57% of applied cis-1,3-D and trans-1,3-D was emitted via volatilization, respectively. The total losses of cis-1,3-D were significantly greater than that of trans-1,3-D. Finally, cis-1,3-D and trans-1,3-D, such as isomer are dominant of 1,3-D fates in soil.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2009.10a
• /
• pp.75-80
• /
• 2009

Despite its flexibility to complex geometry, three-dimensional (3D) electromagnetic(EM) modeling schemes using finite element method (FEM) have been faced to practical limitation due to the resulting large system of equations to be solved. An efficient 3D FEM modeling scheme has been developed, which can adopt either direct or iterative solver depending on the problems. The direct solver PARDISO can reduce the computing time remarkably by incorporating parallel computing on multi-core processor systems, which is appropriate for single frequency multi-source configurations. When limited memory, the iterative solver BiCGSTAB(1) can provide fast and stable convergence. Efficient 3D simulations can be performed by choosing an optimum solver depending on the computing environment and the problems to be solved. This modeling includes various types of controlled-sources and can be exploited as an efficient engine for 3D inversion.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.6A
• /
• pp.627-633
• /
• 2006

In spite of many advantages of Meteor Burst Communications(MBC) on its transmission channel, the fact that its duty rate is less than 10 percents is a considerable deficiency of MBC. To overcome with this deficiency without paying large cost, we use a direct sequence(DS) simple reception system. This method doesn't need to add the components for acquisition or tracking the signal so that it keeps the cost efficiency of the MBC. But it has a disadvantage that its duty rate shows a large decline by noise. For this problem we adopt the proposed system applying a transversal filter circuit. The improvement by this method is more significant when the received signal is weak Simulation results show as t1 is 100ms, then the burst length would be increased by 35% when the initial value of the received signal power increases by 3 dB, t2 is 135ms. If the power increases by 6dB the burst length would be 170ms thus increased by 70%, which shows a great enhancement. Suppose now that t1 is 50ms and the power is increased by 3dB, then t2 would be increased by 70% to 85ms, and increasing the power by 6dB it would be increased by 130% to 115ms.

• Proceedings of the Korea Contents Association Conference
• /
• 2014.06a
• /
• pp.29-30
• /
• 2014

• Korean Journal of Computational Design and Engineering
• /
• v.21 no.2
• /
• pp.186-195
• /
• 2016

The finite element modeling of a ship for hull structural analysis on the basis of new harmonized common structural rules (CSR-H) is to be extended to the cargo holds in fore and after body of a ship. Unlike the parallel middle-body where the external and internal features of hull are equal along to the longitudinal direction of a ship, in fore and after body, the external and internal features of hull vary linearly or even irregularly in forms of a surface or a curve along to the longitudinal direction of a ship. Thus, it needs lots of design man-hours for the modeling for structural analysis. In order to save man-hours in initial structural design phase of a ship, the specified 3D CAD system has been adopted in shipbuilding industry. Through the interface between CAD and CAE (rule scantling and direct strength assessment), design man-hour in initial design phase can be saved even under the environment of CSR-H.

• Archives of Pharmacal Research
• /
• v.9 no.4
• /
• pp.223-227
• /
• 1986

The structure of alclofenac was determined by single crystal X-ray diffraction analysis. The compound was recrystallized from chloroform solution in monoclinic system space group $C_{2}$/c, with Z = 8, a = 8, a = 23.349(9), b =14.295 (3), c = 7.192 (2) $\AA$, $\beta$ = 111.32 (3)$^{\circ}$, and $d_{dbs}$ = 1.29, $d_{caic}$ = 1.30. The structure was solved by direct method and refined by least-squares procedure to the final R-value being 0.044 for 1055 reflections (F ${\geq}6${\sigma}$(F)). The molecules are dimerized by OH..O type hydrogen bonds related by two-fold axis.