• 모자간호학회지
• /
• v.4 no.1
• /
• pp.3-11
• /
• 1994

Presently there is an increasing demand for home health care services due to changes in the demographic structure as a result of an increasing elderly population, socio-economic improvements, and changes in the family structure, as well as the growing number of people with degenerative diseases. In addition to these reasons, rising medical costs and there a shortage of patient beds space in the hospital, particularly since introduction of national medical insurance. There has been an increasing demand for health care health care services. This study was done to identify the basic data for home health care management. It focused on developing client selection criteria, assessment tools, and recording methods. This was accomplished by the researchers visiting the patients in their homes. The research process included preparation investigation, tool development, training of the project researcher, and visiting the clients in their homes. The research tools are as follows : 1. Record development : a) The selection criteria tool for home health care of postpartum women was a structured tool and consisted of four parts. b) The structured assessment tool consisted of a general items, obstetric history, past medical history, methods of feeding, medications taken before admission, laboratory test results, discharge instructions, discharge medications, family tree, economic status, environmental status, a map, health assessment of postpartum women and their newborns. c) The visit note I consisted of the frequency of visits. Visit note II consisted of the date ; nursing problems ; nursing process including the initial assessment ; nursing goal ; visit plan ; postpartum women and their neonate health status, diagnosis, goal, implementation, evaluation, summary, next plan, for visit revision. d) Problem note consisted of the date, problem numbers, nursing diagnosis, problem appearance date problem resolution date. The research results are as follows : 1. Nursing problems : The nursing problems of the postpartum women and their neonates were evaluated by the number of nursing diagnoses and the change in the pattern of nursing diagnosis related to the number of visits. a) Nursing diagnosis The nursing diagnosis was classified according to physical function, psychosocial function, family system maintained function. b) The changes of nursing diagnosis related to the number of visits. As the type of nursing diagnosis changed related to the number of visits the number of nursing diagnoses decreased. 2. Contents of home health care : The content was categorized according to assessment, direct care, counseling, education, family care, reporting to with the attending doctor. The recommendations based on the research results are as follows : 1. Tool development Replication of this study is needed to test the validity of the assessment tools used. 2. Home visit a) Home health care nurses should be licensed and qualified. A referral form from the attending doctor is needed for legal protection of nurses. b) The first home visit need to be within 24 hours of discharge from the hospital to decrease the anxiety of frightened postpartum women. c) When the changes occur in the newborn's status, home health care nurses should consult a pediatrician. Communication within the home healthcare team is essential and needs to consistent and done smoothly. 3. Home health care A Study is required to develop protocols for education of staff and for operation of all aspects of this program.

• Journal of Adhesion and Interface
• /
• v.18 no.2
• /
• pp.75-81
• /
• 2017

In this study, we synthesized mesoporous carbon (Carbonized Ni-FDU-15) containing nanoporous structures and magnetic nanoparticles. Carbonized Ni-FDU-15 was synthesized via evaporation-induced self-assembly (EISA) and direct carbonization by using a triblock copolymer (F127) as a structure-directing agent, a resol precursor as a carbon-pore wall forming material, and nickel (II) nitrate as a metal ion source. The mesoporous carbon has a well-ordered two-dimensional hexagonal structure. Meanwhile, nickel (Ni) metal and nickel oxide (NiO) were produced in the magnetic nanoparticles in the pore wall. The size of the nanoparticles was about 37 nm. The surface area, pore size and pore volume of Carbonized Ni-FDU-15 were $558m^2g^{-1}$, $22.5{\AA}$ and $0.5cm^3g^{-1}$, respectively. Carbonized Ni-FDU-15 was found to move in the direction of magnetic force when magnetic force was externally applied. The magnetic nanoparticle-bearing mesoporous carbons are expected to have high applicability in a wide variety of applications such as adsorption/separation, magnetic storage media, ferrofluid, magnetic resonance imaging (MRI) and drug targeting, etc.

• Archives of design research
• /
• v.17 no.3
• /
• pp.283-292
• /
• 2004

Today's fast-paced world is becoming increasingly characterized by technology-facilitated transactions. Growing numbers of customers interact with technology to create service outcomes instead of interacting with a service firm employee. Self-service technologies provide technological interfaces that enable customers to produce a service independent of direct service employee involvement. To investigate on the customer satisfaction with self-technological based product design in Subway. I used the critical incident technique developed by Flanagan(1954) with quantitative measures of attributions. In this research, it results that customers are considered more important the value of technological-function and easy to use than the aspect of automated machine. It is likely that the technological aspect of many self-service options has a unique influence on customer perceptions of self-service encounters. Also, Research has shown that customer's needs are defined as situations in which external environmental factors add a sense of urgency to the transaction and saved time. On the other hand, customers realize that their favorable image of self-technological based product follows as ; first, customers prefer to the simple & modern image on the aspect of product design, secondly, customers prefer to the hitech-functional image to do its job fast in a short time by automated technology on the aspect of functional service, thirdly, customers prefer to the comfortable and sanitary image to be suitable for the underground circumstance.

• Restorative Dentistry and Endodontics
• /
• v.20 no.2
• /
• pp.645-654
• /
• 1995

Porphyromonas endodontalis is a black-pigmented anaerobic Gram negative rod which is associated with endodontal infections. It has been isolated from infected dental root canals and submucous abscesses of endodontal origin. DNA probe is an available alternative, offering the direct detection of a specific microorganism. Nucleic-acid probes can be off different types: whole different: whole-genomic, cloned or oligonucleotide probes. Wholegenomic probes are the most sensitive because the entire genome is used for possible hybridization sites. However, as genetically similar species of bacteria are likely to be present in specimences, cross-reactions need to be considered. Cloned probes are isolated sequences of DNA that do not show cross-reactivity and are produced in quantity by cloning in a plasmid vector. Cloned probes can approach the sensitivity found with whole-genomic probes while avoiding known cross-reacting species. Porphyromonas endodontalis ATCC 35406 (serotype $O_1K_1$) was selected in this experiment to develop specific cloned DNA probes. EcoR I-digested genomic DNA fragments of P. endodontalis ATCC 35406 were cloned into pUC18 plasmid vector. From the E. coli transformed with the recombinant plasmid 4 clones were selected to be tested as specific DNA probes. Restriction-digested whole-genomic DNAs prepared from P. gingivalis 38(serotype a), W50(serotype b), A7A1-28(serotype C), P. intermedia 9336(serotype b), G8-9K-3(serotype C), P. endodontalis ATCC 35406(serotype $O_1K_1$), A. a Y4(serotype b), 75(serotype a), 67(serotype c), were each seperated on agarose gel electrophoresis, blotted on nylon membranes, and were hybridized with digoxigenin-dUTP labeled probe. The results were as follows: 1. Three clones of 1.6kb(probe e), 1.6kb(probe f), and 0.9kb(probe h) in size, were obtained. These clones were identified to be a part of the genomic DNA of P. endodontalis ATCC 35406 judging from their specific hybridization to the genomic DNA fragments of their own size on Southern blot. 2. The clones of 4.9kb(probe i) was identified to be a part of the genomic DNA of P. endodontalis ATCC 35406. but not to specific for itself. It was hybridized to P. gingivalis A7A1-28, P. intermedia G89K-3.

• Journal of Service Research and Studies
• /
• v.8 no.3
• /
• pp.63-80
• /
• 2018

This study empirically analyzed impacts of interaction quality and physical environmental quality on university recommendation intention of Chinese international students in Korea. In addition this study analyzed a direct impact of familiarity toward Korea on university recommendation intention, and a moderating impact of familiarity toward Korea on the relationship among interaction quality, physical environmental quality, and university recommendation intentions of Chinese international students in Korea. For empirical analysis, this study collected 204 questionnaires in final from Chinese international students currently living in the KyungBuk province. The analysis result was that all three antecedents interaction quality, physical environmental quality, and familiarity toward Korea positively affect university recommendation intention. And the familiarity to Korea positively moderated the relationship between physical environmental quality and university recommendation intentions. Finally, this study suggested academic and practical implications.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2003.04a
• /
• pp.131-132
• /
• 2003

Leaf discs and apical meristems were cultured in Murashige and Skoog (MS) medium supplemented with cytokinin and auxin at different concentrations. Callus production was observed in all tested media after six days of incubation. Callus produced in the presence of high concentration of NAA (2.0mg/1) was fragile in texture and yellow in colour. Highest callus formation was observed from leaf discs in the medium supplemented with 1.0mg/1 NAA and 0.5 mg/l BAP in dark at $25{\pm}1{\circ}C$. Percentage of callus formation was 95% and mean callus fresh weight was 654.88 43.53 mg. Shoots were induced from the callus after 4 weeks in 1/2MS medium supplemented with BAP and kinetin both at 0.5mg/1. When elongated shoots were separated and transferred into multiplication medium (MS+0.5mg/1 BAP+0.5mg/1 kinetin) multiplication rate was 6.4 after 6 weeks. Higher concentrations of BAP caused callus production at the base. Direct shoot induction was observed from apical meristems in MS medium in the presence of 0.175 mg/1 IAA + 2.25mg/1 BAP and 0.175 mg/1 IAA + 3.0 mg/1 BAP in 16 hour day at $25{\pm}1{\circ}C$. Explants (apical meristems) elongated to form a single shoot forming a callus at the base. Adventitious buds were sprouted out from the base. Percentage explants which producing shoots was 28.57 and 65.5 respectively. Multiple shoot induction was also observed in the same media. Highest multiple shoot production was observed in the presence of 0.175 mg/l IAA and 3.0mg/l BAP, Mean number of shoots per explant was 5.36 and the mean shoot length was $16.66{\pm}4.15$mm. Shoots (20 30m length) were tested for root induction. Excised shoots were transferred into rooting media, which contains different concentrations of NAA and IAA. Best rooting performance was observed in 1/2MS medium supplemented with 0.1mg/1 NAA after 10 days of incubation in 16 hr photoperiod at $25{\pm}1{\circ}C$. Mean number of roots per shoot was 6 and the mean root length was 252mm. Rooted plantlets were transferred into sterile coir dust:sand (1:4) mixture and maintained in a humid chamber for two weeks, They were gradually exposed to the natural environment. After three weeks they were transferred to pots containing coir dust:sand (1:2) mixture for further development where the 90% survival was observed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1A
• /
• pp.55-65
• /
• 2006

This paper presents the closing analysis of a symmetric steel cable-stayed bridge erected by a free cantilever method. Two independent structural systems are formed before the closing procedure of a bridge is performed, and thus the compatibility conditions for vertical displacement and rotational angle are not satisfied at the closing section without the application of proper sectional forces. Since, however, it is usually impossible to apply sectional forces at the closing section, the compatibility conditions should be satisfied by proper external forces that can be actually applicable to a bridge. Unstrained lengths of selected cables and the pull-up force of a derrick crane are adjusted to satisfy nonlinear compatibility conditions, which are solved iteratively by the Newton-Raphson method. Cable members are modeled by the elastic catenary cable elements, and towers and main girders are discretized by linear 3-D frame elements. The sensitivities of displacement with respect to the unstrained lengths of selected cables and the pull-up force of the derrick crane are evaluated by the direct differentiation of the equilibrium equation. A Monte-Carlo simulation approach is proposed to estimate expected construction errors for a given confidence level. The proposed method is applied to the second Jindo Grand Bridge to demonstrate its validity and effectiveness.

• Tuberculosis and Respiratory Diseases
• /
• v.43 no.6
• /
• pp.842-851
• /
• 1996

Background : Rifampicin(RFP) is a key component of the antituberculous shon-course chemotherapy and the RFP-resistance is a marker of multi-drug resistant(MDR) M. tuberculosis. rpoB gene encodes the ${\beta}$-subunit of RNA polymerase of M. tuberculosis which is the target of RFP. Recent reports show that rpoB gene mutations are the cause of RFP resistance of M. tuberculosis and the main mechanism of rpoB gene mutation is point mutation. And PCR-SSCP is a rapid and easy method for detecting point mutations. So we performed PCR-SSCP of rpoB gene of M. tuberculosis and compared the result with traditional RFP sensitivity test. Method : The 27 RFP sensitive M. tuberculosis culture isolates and 25 RFP resistant isolates were evaluated. The RFP sensitivity test was done at the Korean Tuberculosis istitute. The DNA was extracted by bead beater method and was amplified with primers TR-8 and TR-9 in a 20ul PCR reaction containing 0.1ul(luCi) [${\alpha}-^{32}P$] - dCTP. After amplification, SSCP was done using non-denaturaring polyacrylamide gel electrophoresis. Then direct sequencing was done in cases of different eletrophoretic mobility compared with that of H37Rv. In 19 cases, we compared PCR-SSCP results with patient's clinical course and the results of traditional RFP sensitivity test. Results : 1) All 27 RFP sensitive M. tuberculosis isolates showed the same electrophoretic mobility compared with that of H37Rv. And all 25 RFP resistant M. tuberculosis isolates showed different electrophoretic mobility. 2) The mechanism of rpoB gene mutation of M. tuberculosis is mainly point mutation. 3) The PCR-SSCP results correlate well with traditional RFP sensitivity and patient's clinical response to antituberculous treatment. Conclusion: The PCR-SSCP of rpoB gene is a very sensitive and rapid mehod in detecting RFP- resistant M. tuberculosis.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.12 no.1
• /
• pp.1-13
• /
• 2017

The purpose of this study is to find out which factors determine the success of start-up in the initial market and what are the most important determinants. For the empirical analysis, the questionnaire related to the analysis of success factors for start-up success was designed according to the quantitative analysis (AHP technique). First, we selected 8 representative success factors for successful start-up in the initial market. In order to determine the degree of priority among these factors, we surveyed 12 entrepreneurs who are interested in entrepreneurship, universities, research institutes, and public officials. As a result of the empirical analysis, 51% of the funds in the tier 1 were ranked as the top priority to determine success factors. Followed by research and development (32.5%), management (8.7%) and marketing (7.8%). In particular, when each of the four items is calculated as 100 according to the result of the tier 1, and the tier 2 is converted, the foreign investment is analyzed as 43.7%. It was followed by 15.14% of R & D facilities, 14.07% of ideas, 8.7% of managerial ability, 7.29% of domestic investment, 5.85% of buyer feedback, 3.3% of development strategy and 1.95% of marketing strategy. Among the eight success factors, overseas investment items showed the closest preference to half, and it was the most important variable that determines the success or failure of market entry. The implication of this study is that many start-ups in Korea expect to receive investment and support from overseas accelerators. This means that overseas investment itself has been recognized as a start-up that makes services and products that can be used in the global market. A high preference for attracting foreign investment is due to the fact that the amount of investment is larger than that of Korea and that it can flexibly cope with the pressure on the performance compared to domestic investors. In this study, it was meaningful that we could confirm this fact through questionnaires of start-up experts. In future research, we need to find a viable alternative through studying how to provide start-up to foreign direct investment at the national level.

• Tuberculosis and Respiratory Diseases
• /
• v.41 no.4
• /
• pp.389-396
• /
• 1994

Background : The two most important purposes of fiberoptic bronchoscopy in lung cancer patients are obtaining tissue diagnosis and staging. The direct sign of lung cancer on FOB includes visible tumor, with smooth or nodular surface, with or without necrosis and infiltration. Variant cell types of lung cancer have their characteristic biological behaviors respectively. For example, squamous cell carcinoma grows slowly, invades locally and has easy necrosis resulting in cavitation, whereas adenocarcinoma shows early metastasis, small cell carcinoma shows rapid growth and higher early metastasis rate. Based on this, it could be hypothesized that each cell type may have characteristic bronchoscopic finding. Method : To answer this question, we reviewed 106 cases which were diagnosed as primary lung cancer and had bronchoscopically visible specific cancerous lesions. Results : The results were as follows. 1) Squamous cell carcinoma accounted for 66 cases(62.2%), adenocarcinoma 15 cases(14.2%), large cell carcinoma 3 cases(2.8%). 2) The endobronchial tumor lesion was arbitrarily classified into 5 types according to gross characteristics. Type A, multilobulating mass with necrosis, accounted for 24.5%, type B, multilobulating mass without necrosis, 25.5%, type C, round beefy mass, 9.4%, type D, infiltration with mucosal irregularity, 6.6%, and type E, infiltration without mucosal irregularity, 34%. 3) The analysis of correlation between endobronchial tumor pattern and specific cell type revealed that squamous cell carcinoma had relation with the morphologic type B and small cell carcinoma had relation with the morphologic type E, but adenocarcinoma had no preponderance in morphologic type. The gross appearance had influence on the diagnostic yields of biopsies and the diagnostic yields of lobulating mass types(type A, B) were higher than those of other types. Conclusion : From the above observations, it could be concluded that squamous cell carcinoma and small cell carcinoma have relations with specific types of bronchoscopic morphology, but not the case in adenocarcinoma.