• 대한기계학회논문집A
• /
• 제21권10호
• /
• pp.1561-1570
• /
• 1997

This study explores the treatment of the max-value cost function over a parameter interval in parametric optimization. To avoid the computational burden of the transformation treatment using an artificial variable, a direct treatment of the original max-value cost function is proposed. It is theoretically shown that the transformation treatment results in demanding an additional equality constraint of dual variables as a part of the Kuhn-Tucker necessary conditions. Also, it is demonstrated that the usability and feasibility conditions on the search direction of the transformation treatment retard convergence rate. To investigate numerical performances of both treatments, typical optimization algorithms in ADS are employed to solve a min-max steady-state response optimization. All the algorithm tested reveal that the suggested direct treatment is more efficient and stable than the transformation treatment. Also, the better performing of the direct treatment over the transformation treatment is clearly shown by constrasting the convergence paths in the design space of the sample problem. Six min-max transient response optimization problems are also solved by using both treatments, and the comparisons of the results confirm that the performances of the direct treatment is better than those of the tranformation treatment.

• 한국의류학회지
• /
• 제33권1호
• /
• pp.139-148
• /
• 2009

In this study, we tried to verify the effectiveness of 3D scans of clothed participants from 20 to 24 year old men in fit analysis process. Carrying out fit analysis, we used 3D scan data and direct fit evaluation with the basic garments made as semi-fitted bodice pattern for men. The result of fit evaluation through 3D scan data showed the expert rated fitting items more positive than direct fit evaluation. Even though, generally there was a no significant difference in the response between 3D and direct fit analysis. Only there was a significant difference in the response to the specific place such as the center front line, neckline, shoulder seam, and etc. There was a no significant difference between the result of 3D scan and direct fit evaluation in the subjects' group. Also the result of assessment of 3D targeting consumers showed very positive and interested in using 3D scans for fit analysis. The ability to rotate the 3D scans for a variety of views proved to be a very effective process to analyze fit. Moreover, digital data is easily accessed at any locations and any time. Fit analysis using 3D scans could be great tool for not only fit evaluation in research but also better fitting in apparel industry.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.913-916
• /
• 2008

변형경화형 시멘트 복합체(SHCC)의 직접인장거동은 주로 물시멘트비, 섬유와 매트릭스 간의 상호작용, 부착강도, 섬유 혼입율 등에 의해 영향을 받는다. 본 논문은 PET 및 PVA섬유를 사용한 SHCC의 직접인장거동에서 섬유의 형상비의 영향을 평가하기 위해 PET섬유의 형상비(Aspect ratio, ${\ell}/d_f$ : 150, 300, 600)를 변수로 선정하였다. 동일한 배합조건에서 PET1.5+PVA0.5-300 및 PET1.5+PVA0.5-600시험체는 PET1.5+PVA0.5-150에 비해 우수한 유사변형경화특성과 미세균열분산 특성을 보였으며, PET1.5+PVA0.5-300 및 PET1.5+PVA0.5-600 시험체는 최대인장응력시 각각 0.5, 2.0%의 변형율을 나타내었다.

• Geomechanics and Engineering
• /
• 제36권5호
• /
• pp.427-440
• /
• 2024

This study concentrates on the 301 comprehensive caving working face, notable for its considerable mining height. The roof model is established by integrating prior geological data and the latest borehole rock stratum's physical and mechanical parameters. This comprehensive approach enables the determination of lithology, thickness, and mechanical properties of the roof within 50 m of the primary mining coal seam. Utilizing the transfer rock beam theory and incorporating mining pressure monitoring data, the study delves into the geometric parameters of the direct roof, basic roof movement, and roof pressure during the initial mining process of the 301 comprehensive caving working face. The direct roof of the mining working face is stratified into upper and lower sections. The lower direct roof consists of 6.0 m thick coarse sandstone, while the upper direct roof comprises 9.2 m coarse sandstone, 2.6 m sandy mudstone, and 2.8 m medium sandstone. The basic roof stratum, totaling 22.1 m in thickness, includes layers such as silty sand, medium sandstone, sandy mudstone, and coal. The first pressure step of the basic roof is 61.6 m, with theoretical research indicating a maximum roof pressure of 1.62 MPa during periodic pressure. Extensive simulations and analyses of roof subsidence and advanced abutment pressure under varying working face lengths. Optimal roof control effect is observed when the mining face length falls within the range of 140 m-155 m. This study holds significance as it optimizes the working face length in thick coal seams, enhancing safety and efficiency in coal mining operations.

• 한국재난정보학회 논문집
• /
• 제10권1호
• /
• pp.33-39
• /
• 2014

화학사고 발생 시 현장 초기대응자들은 사고 원인물질과 농도를 신속하고 손쉽게 확인하기 위한 방식으로, 미국 환경청(EPA) 초기대응팀에서도 널리 사용하고 있는 직독식 탐지장비를 이용하고 있다. 환경부에서는 검지관식 가스 탐지장비를 직독식 탐지장비로 이용하여 사고 발생 시 현장에서 이용하고 있고, 검지관식 가스탐지기는 신속한 원인 물질 확인과 정밀한 분석 전에 전략적으로 대략적인 오염물질의 정량과 정성을 확인할 수 있는 유용한 장비이다. 그러나 현장 초기대응자들의 직독식 탐지장비의 사용방법에 대한 이해 부족과 단순 수치로만 확인하려는 방식으로 인해 탐지결과의 정확성에 대한 의문점을 늘 제기해 왔다. 본 논문에서는 사고 현장에서 정확한 탐지 결과를 얻기 위해 환경부에서 사용하고 있는 검지관식 가스탐지기인 Kitagawa와 Draeger 탐지기의 물질 반응성을 확인하여 초기 대응자들의 현장 탐지결과의 정확성을 높이고자 하였다.

• 전기학회논문지P
• /
• 제54권1호
• /
• pp.20-29
• /
• 2005

This paper presents an implementation of efficiency optimization of reluctance synchronous motor (RSM) using a neural network (NN) with a direct torque control (DTC). The equipment circuit considered with iron losses in RSM is analyzed theoretically, and the optimal current ratio between torque current and exiting current component are derived analytically. For the RSM driver, torque dynamic can be maintained with DTC using TMS320F2812 DSP Controller even with controlling the flux level because a torque is directly proportional to the stator current unlike induction motor. In order to drive RSM at maximum efficiency and good dynamics response, the Backpropagation Neural Network is adapted. The experimental results are presented to validate the applicability of the proposed method. The developed control system show high efficiency and good dynamic response features with 1.0 [kW] RSM having 2.57 inductance ratio of d/q.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권7호
• /
• pp.883-887
• /
• 2000

One way of evaluating the effectiveness of a dairy breeding program is to measure response to selection. This may be direct or indirect. The objectives of this study were to estimate expected progress for direct selection on milk, fat and protein yields; to estimate the expected correlated responses on indirect selection for milk, fat and protein yields in Zimbabwean Holstein cattle and to establish the effect of selection intensity on responses. The Animal Model contained fixed effects of herd, year of calving, calving month, dry period, milking frequency and additive effects pertaining to cows, sires and dams. AIREML software package was used to analyse the data. The genetic and phenotypic parameters obtained in this study were used to compute direct and correlated responses to selection. Because of the higher heritabilities in first parity, genetic progress was found to be greater when selection was practised on first parity cows as compared to later lactations. It is therefore recommended that older cows in the herd be replaced with improved heifers so as to enhance genetic progress.

• Journal of Biosystems Engineering
• /
• 제21권2호
• /
• pp.155-166
• /
• 1996

A direct injection sprayer was designed using the concepts of injection mixing and total flow control, flowrate-based system compensating for the variation of forwarding speed. A metered rate, proportionally to the actual diluent flow rate, of a tracer chemical was injected directly into the diluent stream. The injection of chemical may improve the precision and safety of chemical application process. The control system was evaluated for the variables of the control interval, tolerances and sensitivities of flow regulation valve and injection pump. Performance of the system was assessed as that the response time of flow rate, response time of injection rate, absolute steady state error, and the coefficient of variance(C.V.) of concentration were 8.5 and -0.53 seconds, 0.067 lpm(0.8%) and 3.15%, respectively, at optimal parameters of control interval of 1.0 sec, fast sensitivity of flow regulation valve, medium sensitivity of injection pump and medium tolerance of flow rate. Performance of the system can be improved by increasing the sensitivity of flow regulating valve and employing a high resolution velocimeter, such as Doppler radar.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.136-136
• /
• 2000

The direct drive servo valve(DDV) is composed of a DC rotor, link, valve spool and displacement sensor(LVDT) where the spool is directly coupled to the DC motor through the link. Since the DDV is a kind of one-stage valve, the robust controller is required to overcome the flow force effect on the spool motion. The mathematical equations are derived and the stability, accuracy and response speed of a DDV are investigated analytically using a linearized system block diagram. Proportional control, PID control. Time-Delay control, Sliding Mode control, and Proportional control using the load pressure are applied to DDV to find which one shows the best control performance. The digital computer simulation results show that the proportional control using the load pressure satisfies the design requirement of response speed and steady state error regardless of the variation of load pressure,

• 한국소음진동공학회논문집
• /
• 제12권9호
• /
• pp.674-684
• /
• 2002

In order to decrease remarkably the computation time and storage used in the direct integration method without the loss of accuracy, authors suggest a new transient analysis algorithm. This algorithm is derived from the combination of three techniques, that is, the transfer technique of the transfer stiffness coefficient method, the modeling technique of the finite element method, and the numerical integration technique of the Newmark method. In this paper, the transient analysis algorithm of a frame structure is formulated by the proposed method. The accuracy and computation efficiency of the proposed method are demonstrated through the comparing with the computation results by the direct integration method for three computation models under various excitations.