• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.267-270
• /
• 1999

In this paper, a new method to reduce the size of ROM in the direct digital frequency synthesizer (DDFS) is proposed. In the case that ROM is used for sinusoidal value calculation, reducing the size of ROM is significant. So the power consumption is affected mostly by its bit width. In the proposed method, the ROM bit width is reduced by 1 bit using the phase subtraction and the approximation. The spurious level is better than 80㏈c and the power consumption estimated is 510㎼/MHz.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.499-499
• /
• 2000

The robust stability problems for nominally linear system with nonlinear, structured perturbations arc considered with Lyapunov direct method. The Lyapunov direct method has been utilized to determine the bounds for nonlinear, time-dependent functions which can be tolerated by a stable nominal system. In most cases quadratic forms are used either as components of vector Lyapunov function or as a function itself. The resulting estimates are usually conservative. As it is known, often the conservatism of the bounds we propose to use a piecewise quadratic Lyapunov function. An example demonstrates application of the proposed method.

• 한국인쇄학회지
• /
• 제10권1호
• /
• pp.35-54
• /
• 1992

Direct electrostatic coating method is simple, low cost and environmentally useful method. We are investigated on the coating of carrier transfer polymer layer on the carrier generate inorganic pigment layer using direct electrostatic coating method. The sample was obtained electrostatic deposite layer by fusing and calendering on the copper phthalocyanine. we could be found several polymer thin film shows good bond properties between film and pigment layer.

• 산업기술연구
• /
• 제18권
• /
• pp.233-240
• /
• 1998

In this study, ride sensitivity analysis of train with non-linear suspension elements is performed. Non-linear characteristics of springs and dampers for primary and secondary suspensions of a train is parameterized. Equation of motion of the train model is derived, and using the direct differentiation method, sensitivity equations are obtained. For a nominal ride quality performance index, sensitivity analysis with respect to various design parameters regarding non-linear suspension parameters is carried out.

• Current Research on Agriculture and Life Sciences
• /
• 제18권
• /
• pp.33-42
• /
• 2000

A field case study was performed to investigate the effect of shallow ponding in paddy field on irrigation water requirement of direct seeded rice. In addition, an economic analysis was made to see the effect of no-till direct seeded rice on cost reduction. A field study was performed at a 2.1ha paddy field in Kimjae city, Chonbuk province from 1991 to 1999. Various direct seeding methods such as dryland seeding, wetland seeding, and no-till wetland seeding were introduced. Then, cost reductions due to the direct seeding and no-till were calculated. In addition, to investigate the effect of shallow ponding on irrigation water requirement, field measurements such as irrigation water volume, drainage water volume, rainfall depth, and ponding depth, were made at a 40a plot within the same area in 1988 and 1990. The results of the shallow ponding study showed that the irrigation water depth, rainfall, and the drainage depth were 379mm, 458mm, and 448mm in 1988 growing season, and 274mm, 819mm, and 736mm in 1990, respectively. The shallow ponding irrigation method saved irrigation water by about 20% with higher yield compared with the traditional method. The economic analysis showed that won \640,000 per ha can be saved by direct seeding due to no nursery cost, and \1,220,000 per ha due to no-till and no nursery cost. The yields ranged 540 to 640 kg per 10a during the study period with an average of 590kg per 10a. If these cropping techniques with no-till direct seeding and shallow ponding depth for rice cropping prove to be advantageous with further study, they can be adopted for the most of the paddy fields in Korea.

• 한국가스학회지
• /
• 제18권5호
• /
• pp.12-19
• /
• 2014

매설배관의 부식위험성을 최소화하고 음극방식의 효율극대화를 위해 다양한 비굴착 간접검사기법들이 수십년 전부터 이용되고 있으며, 미국에서는 굴착을 통한 매설배관 외면부식 직접평가법을 CFR 코드에서 규정하고 있다. 국내의 경우에는 도시가스사업법 관련 4개의 기준(KGS Code)에서 배관의 손상여부를 측정할 수 있는 장비를 이용하여 배관의 상태를 점검, 측정하고 이상부위에 대하여 누출검사를 한 경우 매설배관의 기밀시험을 한 것으로 보고 있을 뿐 배관외면부식 직접평가에 대한 규정은 없다. 본 논문에서는 미국, 영국 등 국외의 매설배관 건전성 관리 기준 및 방법을 조사하고, 국내의 매설배관 방식관리 실태 및 피복손상탐지 장치 이용실태 등을 조사한 후 국내 실정에 맞는 매설배관 외면부식 직접평가법을 제시하였다. 본 논문에서 제시한 매설배관 외면부식 직접 평가법은 국내에서 중압배관의 정밀안전진단 제도를 도입하는데 기초 자료로 활용되었다.

• ETRI Journal
• /
• 제37권2호
• /
• pp.317-327
• /
• 2015

A reliable analysis of consumer preference from a large amount of purchase data acquired in real time and an accurate customer characterization technique are essential for successful direct marketing campaigns. In this study, an optimal segmentation of post office customers in Korea is performed using a subspace projection-based clustering method to generate an accurate customer characterization from a high-dimensional census dataset. Moreover, a traditional temporal mining method is extended to an algorithm using the MapReduce framework for a consumer preference analysis. The experimental results show that it is possible to use parallel mining through a MapReduce-based algorithm and that the execution time of the algorithm is faster than that of a traditional method.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.708-714
• /
• 2001

Although LP gas has lots of advantages, there has been limitation in application for automotive engine due to the several disadvantages, such as power decrease, complex fuel supply unit, and back fire etc. However LP gas direct injection engine has possibility to solve the problems above mentioned. LEM(Light Extinction Method) was employed for analysis of spacial and temporal distribution of LP gas which is directly injected into combustion chamber under various pressure and temperature conditions. The results from CVC(Constant Volume Chamber) were compared to those of RICEM(Rapid Induction, Compression and Expansion Machine) which simulate early- and late injection of direct injection engine. LPG fuel spray is affected by temperature and pressure in evaporation characteristics but it is more benefit to direct injection engine in every way such as, fuel distribution, evaporating speed and well wetting reduction.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권1호
• /
• pp.17-25
• /
• 2005

This paper provides sufficient conditions for the robustness of Affine linear TFM(Transfer Function Matrix) MIMO (Multi-Input Multi-Output) uncertain systems based on Rosenbrock's DNA (Direct Nyquist Array). The parametric uncertainty is modeled through a Affine TFM MIMO description, and the unstructured uncertainty through a bounded perturbation of Affine polynomials. Gershgorin's theorem and concepts of diagonal dominance and GB(Gershgorin Bands) are extended to include model uncertainty. For this type of parametric robust performance we show robustness of the Affine TFM systems using Nyquist diagram and GB, DNA(Direct Nyquist Array). Multiloop PI/PB controllers can be tuned by using a modified version of the Ziegler-Nickels (ZN) relations. Simulation examples show the performance and efficiency of the proposed multiloop design method.

• 전기학회논문지
• /
• 제56권6호
• /
• pp.1047-1054
• /
• 2007

This paper presents a high efficiency direct instantaneous torque control (DITC) of Switched Reluctance Motor(SRM) based on the nonlinear model. The DITC method can reduce the high inherent torque ripple of SRM drive system, but drive efficiency is somewhat low due to the high current and switching loss during commutations. In order to reduce a torque ripple, a fast torque reference trajectory is selected at every instantaneous rotor position. Based on the nonlinear model of SRM, the developing torque by one phase is fixed and the other phase is regulated for minimum switchings of phase switch and variation of torque. The switching during commutation can be reduced and fast commutation can be obtained in the proposed method. As a result, drive efficiency could be improved as well as torque ripple reduction. The validity of proposed method is verified by computer simulations and comparative experiments.