The pantograph-overhead contact line system is an interface that supplies power to high-speed trains used in many countries including Korea. Due to the fact that power is supplied through direct contact between contact wires and contact strips, wear may occur, increasing the possibility of accidents over periods of time. Therefore, there is a need to establish methods of effectively extracting safety related parameters. In this paper, an image processing based method that calculates and draws graphs of a pantograph's dynamic stagger is proposed. To assess reliability, the results were compared with data collected from conventional maintenance vehicles.
본 연구에서는 레이저광선의 투영을 이용한 접촉각측정기구가 개발되었다. 이 새로운 방법은 편평한 표면분만 아니라 직격이 가는 섬유를 포함한 굴곡진 표면에서는 stationary, advancing그리고 receding contact angle-을 신속하고 정확하게 측정할 수 있게 하여 준다. 가는 레이저광선이 액체와 고체사이 계면의 끝을 통과하여 tangent screen의 각도를 재는 눈금상에 중심으로부터 방사상으로 두개의 선이 나타나게 된다. 이때 눈금상에 투영된 두개의 레이저광선 사이의 각도를 접촉각으로 결정한다. 이 새로운 기구를 사용한 결과, PMMA(Perspex-CQ)상에서의 접촉각은 문헌상의 접촉각과 일치함으로써 간편하고 정확한 접촉각 측정법임을 입증할 수 있었다.
With the explosion of digital devices, interaction technologies between human and devices are required more than ever. Especially, hand gesture recognition is advantageous in that it can be easily used. It is divided into the two groups: the contact sensor and the non-contact sensor. Compared with non-contact gesture recognition, the advantage of contact gesture recognition is that it is able to classify gestures that disappear from the sensor's sight. Also, since there is direct contacted with the user, relatively accurate information can be acquired. Electromyography (EMG) and force-sensitive resistors (FSRs) are the typical methods used for contact gesture recognition based on muscle activities. The sensors, however, are generally too sensitive to environmental disturbances such as electrical noises, electromagnetic signals and so on. In this paper, we propose a novel contact gesture recognition method based on Flexible Epidermal Tactile Sensor Array (FETSA) that is used to measure electrical signals according to movements of the wrist. To recognize gestures using FETSA, we extracted feature sets, and the gestures were subsequently classified using the support vector machine. The performance of the proposed gesture recognition method is very promising in comparison with two previous non-contact and contact gesture recognition studies.
The modulation of leukocyte cell surface adhesion molecules may influence the development of cellular events that determine the course of the inflammatory process. Direct interaction between activated T cells and monocytes resulted in a large production of $IL-1{\beta}$ by monocytes. In this reactions, adhesion molecules play an important part, yet the role of them in Tmonocytes interaction remain unclear. This study was undertaken in an effort to elucidate, 1) the influence of 1.25(OH)$_2D_3-induced$ differentiation on the monocyte responsiveness to direct contact with T lymphocytes, and 2) the role of adhesion molecules on the T-monocyte direct interaction. Initially, I observed that direct contact of monocyte cell line THP-1 with stimulated fixed T cell line HuT78 markedly induces IL-1${\beta}$ production by THP-1. $IL-1{\beta}$ production was higher when THP-1 had been previously exposed to 1.25(OH)$_2D_3$ as compared to control, with ${\alpha}$- 1.25(OH)$_2D_3$ dose-dependent and exposure time-dependent manner. It was shown that 1.25(OH)$_2D_3$ also increased the expression of ${\beta}_2$ integrin adhesion receptor Mac-1(CD11b/CD18) dose- and timedependently, but did not increase the expression of human leukocyte antigen- D(HLA-D) and intercellular adhesion molecule-1(ICAM-1). The $IL-1{\beta}$ producing activity of THP-1 cells correlated well with the ability to induce the Mac-1 expression on THP-1 surface. Monoclonal antibody raised against relevant cell surface glycoproteins on THP-1 were tested for their ability to block the response of THP-1 to T cells. Antibody to Mac-1 only partially blocked $IL-1{\beta}$ production by THP-1, whereas antibodies to ICAM-1 and HLA-D did not. These data indicate that regulation of Mac-1 expression on THP-1 cells can alter the responsiveness of these cells to contact by activated T cells, however other unknown structures on the THP-1 cells may be involved in this process also.
It is hard to employ the carbon materials or the lithium metal foil for the anode of lithium sulfur batteries because of the poor passivation in ether-based electrolytes and the formation of lithium dendrites, respectively. Herein, we investigated the electrochemical characteristics of lithium sulfur batteries with lithiated silicon anode in the liquid electrolytes based on ether solvents. The silicon anodes were lithiated by direct contact with lithium foil in a 1M lithium bis(trifluoromethane sulfonyl) imide (LiTFSI) solution in 1,2-dimethoxyethane (DME) and 1,3-dioxolane (DOL) at a volume ratio of 1:1. They were readily lithiated up to ~40% of their theoretical capacity with a 30 min contact time. In particular, the carbon mesh reported in our previous work was employed in order to maximize the performance by capturing the dissolved polysulfide in sulfur cathode. The reversible specific capacity of the lithiated silicon-sulfur batteries with carbon mesh was 1,129 mAh/g during the first cycle, and was maintained at 297 mAh/g even after 50 cycles at 0.2 C, without any problems of poor passivation or lithium dendrite formation.
The complex coupling relationship between liquid sodium and concrete materials affects both the sodium fire characteristics and concrete properties through heat and chemical erosion. In this study, experiments on direct and indirect (separated by a steel plate) contact of the columnar sodium fire with the concrete surface were performed. It was found that the combustion efficiency of liquid sodium in direct contact with concrete was significantly enhanced and accompanied by intermittent explosions and splashing of small concrete fragments. The sodium fire on the surface of the concrete considerably increased the internal temperature, pore size, and distribution density of the concrete. In addition, the depth of influence on the loosening of the concrete structure was also greatly extended. The contact of liquid sodium with the concrete substantially affected its permeability resistance. The water absorption of the concrete surface was increased by more than 70% when liquid sodium directly impacted the bare concrete surface. However, the change in water absorption in the centre of the concrete was primarily affected by the duration of the external heat.
직류 계전기는 전기자동차의 하나의 부품으로 간헐적으로 고주파수 소음이 710 Hz ~ 730 Hz의 주파수 범위에서 전기적 부하에 의해 발생한다. 고정접점과 가동접점 사이에서 발생하는 전자 반발력이 가동접점과 접압 스프링을 진동시키고, 그 진동으로 가동접점과 접압 스프링에 공진이 발생하여 고주파수 소음이 발생한다. 본 논문에서는 수치해석 및 실험을 통하여 고주파수 소음의 원인을 규명하고, 소음을 제거하는 방안을 제시하였다. 710 Hz ~ 730 Hz의 주파수 범위에서 가동접점은 고정접점과의 2개의 접촉점을 기준으로 회전하는 공진모드가 발생한다. 따라서 해당 여기서 제안한 방법은 공진모드를 제거하기 위해 가동접점의 구조를 2점 접촉구조 방식에서 3점 접촉구조 방식으로 변경하는 것이다. 3점 접촉구조를 적용함에 따라 공진모드가 제거되는 것을 수치해석으로 확인하였고, 실험적으로도 고주파수 소음이 발생하지 않는 것을 확인하였다.
한국이 초고령사회로 진입하면서 노인 복지에 대한 필요성이 증가하고 있으나 현재 복지 인력 부족이 사회문제로 대두되고 있다. 이에 대한 해결책으로 노인의 사회적 고립감 완화와 위급 상황 시 비상 연락 등의 기능을 하는 노인 돌봄 로봇이 활발히 연구되고 있다. 하지만 이러한 기능들은 사용자의 접촉이 있어야만 작동하여 기존 노인 돌봄 로봇의 한계점으로 자리 잡고 있다. 본 논문에서는 기존의 문제를 해결하기 위해 상용화된 노인 돌봄 로봇과 카메라를 통해 직접적인 접촉 없이도 사용자와 상호작용할 수 있는 돌봄 로봇 시스템을 제안한다. 돌봄 로봇에 연결된 엣지 디바이스에 표정 인식 모델과 행동 인식 모델을 탑재하였고, 공공데이터를 통해 모델의 학습 및 성능검증을 진행했다. 실험 결과를 통해 표정 인식과 행동 인식의 성능이 각각 정확도 96.5%, 90.9%인 것을 확인할 수 있으며, 수행 시간의 경우에는 각각 50ms, 350ms인 것을 확인할 수 있다. 해당 결과는 제안한 시스템의 표정 및 행동 인식 정확도가 높고 추론 시간이 효율적임을 확인하며, 이는 비접촉 상황에서도 원활한 상호작용을 가능하게 한다.
Recently, the market share of the thin-film-transistor liquid-crystalline-display (TFT-LCD) is growing rapidly in display device market. The backlight unit is used as a light source of TFT-LCD module. A light-guide is one of several important components of backlight unit. The manufacturing technology and optical system design of the light guide is very sensitive to quality and cost of the TFT-LCD module. In the present study a new manufacturing method which is called as direct surface forming(DSF) has been tested under various conditions. The result of this test, V-groove pattern shows different shapes depends on the temperature of mold surface, contact time of mold and depth of V-groove.
Sensitivity analysis scheme is developed in the elasto-plastic finite element method with explicit time integration using direct differentiation method. The direct differentiation is concerned with the time integration, constitutive relation, shell element with reduced integration and the contact scheme. Sensitivity analysis results are mainly examined with the highly nonlinear and quasi-static problem with the complicated contact condition. The result shows stable sensitivity especially in the sheet metal forming analysis.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.