• International Journal of Precision Engineering and Manufacturing
• /
• 제9권3호
• /
• pp.79-81
• /
• 2008

A single-wall carbon nanotube (SWNT) transparent conductive film (TCF) was fabricated using a simple inkjet printing method. The TCF could be selectively patterned by controlling the dot size to diameters as small as $34{\mu}m$. In this repeatable and scalable process, we achieved 71% film transmittance and a resistance of 900 ohm/sq sheet with an excellent uniformity, about ${\pm}5%$ deviation overall. Inkjet printing of SWNT is substrate friendly and the TCF is printed on a flexible substrate. This method of fabrication using direct printing permits mass production of TCF in a large area process, reducing processing steps and yielding low-cost TCF fabrications on a designated area using simple printing.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• 제13권2호
• /
• pp.21-27
• /
• 2014

Recently, various biochip environments have been presented. In this study, a novel transparent film with porous membrane windows, which is an essential component in a co-cultured biochip environment, is fabricated using spin-coating, 3D printing, and electrospinning processes. In detail, a transparent polystyrene film was fabricated by means of the spin-coating process followed bywindow cutting, after which apolycaprolactone-chloroform solution was deposited along the window edge to introduce an adhesion layer between the PS film and the PCL nanofibers. Nanofibers were electrospun into the window region using a direct-write electrospinning method. Consequently, it was demonstrated that the fabricated window film could be used in a co-culture biochip environment.

• Journal of the Optical Society of Korea
• /
• 제14권4호
• /
• pp.420-423
• /
• 2010

We fabricated 1 mm-thick periodically-poled lithium niobate (PPLN) crystals by using a high-voltage amplifier for standard electric field poling combined with a voltage multiplier. Furthermore, two 1 mm-thick PPLNs were directly bonded to make a 2 mm-thick PPLN. The large aperture allowed broad angular tuning, and a broad spectral range of quasi-phase matched second-harmonic generation can be achieved in a single channel. High-power applications are also expected.

• Journal of the Korean Society for Precision Engineering
• /
• 제31권12호
• /
• pp.1061-1066
• /
• 2014

Generally electrical circuits are fabricated as PCB(Printed Circuit Board) and mounted on a casing of the product. And it requires lots of other parts and some labor for assembly. Recently a molding technology is increasingly applied to embed simple circuits on a plastic casing. The technology is called as MID(Molded Interconnected Device). Therefore this paper introduces a new MID fabrication process by using direct 3D printing technology.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.763-766
• /
• 2000

The Rapid Prototyping and Tooling technology has been developed. However, most commercial ones currently use resins or waxes as the raw materials. These days. the direct metal deposition methods are researched as a true rapid prototyping and tooling technology. A fundamental study on rapid prototyping and tooling with wire welding technology using $CO_2$ laser radiation was carried out in this paper. The main focus is to develop a simple commercial rapid prototyping and tooling system with the exiting laser welding technology. The process is investigated as a function of laser parameters and process variables. Basic parts were fabricated as out-put and their microstructure, hardness and tensile strength are examined for the reliability. In addition, Its advantages and disadvantages are discussed as a rapid prototyping and tooling system.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• 제32A권8호
• /
• pp.119-125
• /
• 1995

Strained multiple quantum well(SMQW) PBH-DFB-LDs emitting at 1.55$\mu$m wavelength has been fabricated using OMVPE and LPE crystal growth tecnique. Using the SMQW active layer, a linewidty enhancement factor of 2.65 was obtained at lasing wavelength and consequnently, packaged 42 modules showed a very low average chirp of 0.44nm at 2.5Gbps NRZ direct modulation. The 77 devices showed average threshold current of 8.72mA and average slope efficiency of 0.181 mW/mA, and single longitudinal mode operation with SMSR larger than 30dB up to 5mW. Among the 77 devices, standard deviation of lasing wavelength of 3.57nm was obtained owing to a good crystal growth uniformity.

• Journal of the Korean Institute of Telematics and Electronics
• /
• 제25권3호
• /
• pp.343-351
• /
• 1988

Planar optical waveguides are fabricated on a Y-cut LiNbO3 single crystal substrate by Ti indiffusion method. From data measured by the bright M-line spectroscopy, refractive index profiles are reconstructed by WKB approximation method. Then, single strip, X-crossing strip, and Y-brinch strip optical waveguides are fabricated on X-cut LiNbO3 single crystal substrate, with waveguide patterns made by the laser beam direct writing method. And their near-field intensity profiles are observed after coupling the light to the waveguide edges.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• 제61권11호
• /
• pp.1671-1675
• /
• 2012

In this paper, we fabricate multi-channel receiver for radar system. This receiver at X-band can be received 8 signal of an identical characteristic, dynamic range has more than 80[dB]. To process direct received signals, this system has the built-in two digital de-modulators which offer the minimum loss on the receiving signal path and has high stability by adding Built-In Test. The gain, noise figure, difference of amplitude and phase on the signal path is respectively $14{\pm}2$[dB], 19[dB], ${\pm}2$[dB], $10^{\circ}$ and below.

• Proceedings of the KACD Conference
• /
• 대한치과보존학회 2001년도 추계학술대회(제116회) 및 13회 Workshop 제3회 한ㆍ일 치과보존학회 공동학술대회 초록집
• /
• pp.593-593
• /
• 2001

Esthetic restoration techniques can be categorized into "Direct techniques" consist only of intraoral procedures and "Indirect techniques" include intraoral as well as extraoral laboratory steps. Those made extraorally exhibit generally enhanced esthetic potential and anatomy and better hardness and wear resistance, indirect esthetic restorations numerously applied in contemporary dentistry. Indirect restorative materials can be divided into two categories; composite resin-based materials and ceramic-based materials. These materials shows various were resistance, modulus of elasticity, repair postenital, chemical stability, and different laboratory procedures. In this session, benefit of indirect techinques, case selection of this kind of restorations, and material characteristics and fabrication produre of those materials will ber reviewed; Targis, Sculpture, Belleglass, and Post-curing of restorative composite resins in resin-based materials; Dicor, Empress, Cerec, Celay, and conventional firing porcelain in ceramic based materials.

• Journal of Korea Foundry Society
• /
• 제20권3호
• /
• pp.188-196
• /
• 2000

A vacuum casting was proposed as a new fabrication method of Si wafer for solar cell substrate. It was tried to fabricate a Si plate with good properties and to reduce the production cost by direct vacuum casting. By $5{\sim}10$ cmHg of pressure difference Si plate with $50{\times}46{\times}1.5\;mm^3$ was fabricated. For the preventing of the reaction between graphite mold and Si melt, BN powder coating or BN insert were used. The Si wafer was poly crystalline with 100 ${\mu}m{\sim}1$ mm order of grain size. And there were some twins and dislocations in the grains.