• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 B
• /
• pp.558-560
• /
• 1998

The operation of robot manipulators has a restriction that the operator must reside at the factory, where the manipulator is used. To overcome this restriction, we propose a remote control system using the internet, the system which runs on the Window 95 environment is composed of the remote client which transfers commands to the server which control and manage the manipulator in the factory. In the control of Hong-ik Direct Drive Arm, it is necessary to consider the complex nonlinear parameters causing the mutual interaction between joints, so we use two TMS320C31 DSP chips in the controller for the real time dynamic control algorithms. For the test of system integrity and the verification of the mathematical modeling, we apply CTM, PD and VSS control algorithms and the simulation results are satisfactory.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1853-1858
• /
• 2004

This paper presents the development of a full order sliding mode controller for tracking problem of a class of uncertain dynamical system, in particular, the direct drive robot manipulators. By treating the arm as an uncertain system represented by its nominal and bounded parametric uncertainties, a new robust fullorder sliding mode tracking controller is derived such that the actual trajectory tracks the desired trajectory as closely as possible despite the non-linearities and input couplings present in the system. A proportional-integral sliding surface is chosen to ensure the stability of overall dynamics during the entire period i.e. the reaching phase and the sliding phase. Application to a three DOF direct drive robot manipulator is considered.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.884-889
• /
• 1990

In this paper, a new hybrid position control algorithm for the direct drive arm is proposed. The proposed control is composed of discrete feedforward component and continuous feedback component. The discrete component is the nominal torque which approximately compensates the strong nonlinear coupling torques between the links, while the continuous control is a modified version of sliding mode control which is known to have a robust property to the disturbances of system. For the proposed control law, we give sufficient condition which guarantees the bounded tracking error in spite of the modeling errors, and the efficiency of the proposed algorithm is demonstrated by the numerical simulation of a three link manipulator position control with payloads and parameter errors.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.133-135
• /
• 1997

In this paper, a fuzzy tuning discrete-time repetitive control is suggested for a robot manipulator. Real-time implementation of this type of repetitive controller is also performed for a 2 link direct drive robot by using a real-time control system which consists of a real-time OS(Spectra), a single board computer, a communication board and an analog input/output board. First, it is shown that the tracking error is effectively reduced by discrete-time repetitive control. Second, the convergence performance is shown to be much improved by the suggested controller using real-time experimentations.

• 대한기계학회논문집A
• /
• 제28권8호
• /
• pp.1093-1098
• /
• 2004

This paper presents a close-loop feedback control scheme, which can simultaneously satisfy multiple conflicting control performances, for a high speed positioning system driven by a brushless D.C. motor. With the dynamic model of the motor and proportional-plus-derivative feedback controllers selected as sample controllers, the convex combined feedback controller is formulated for implementing a direct-drive manipulator. Experimental results show that the developed multiple simultaneous specification(MSS) controller can meet desired control performances; maximum overshoot and rise time.

• 대한기계학회논문집A
• /
• 제24권2호
• /
• pp.481-488
• /
• 2000

This paper presents a new passive gravity -compensating system for articulated robot manipulators. The system, which consists of linear zero- free -length springs, achieves exact counterbalancing o f the gravitational loads throughout the entire range of the manipulator workspace, A basic concept is to design springs such that the total potential energy of the system including the manipulator and the springs should be maintained constant. A prototype has been developed for a direct-drive five-bar manipulator and its performances have been investigated. Results show that the gravity-induced motor torques have been reduced to less than 5% of those of uncompensated robots. Also, the gravity-compensating system simplifies the position control algorithm while maintaining the trajectory-tracking errors in a satisfactory level. In conclusion, the proposed system efficiently improves the manipulator performances by reducing the driving motor size and the energy consumption as well as by simplifying the control systems.

• 전자공학회논문지T
• /
• 제36T권3호
• /
• pp.64-71
• /
• 1999

본 논문에서는 DD(Direct-drive)의 기구로서 2자유도 평행링크 기구를 사용하였다. 평행링크 기구는 2개의 모터가 각각 기저부에 설치되어 있기 때문에 모터 자체의 질량이 다른 모터에 부하가 되지 않고, 링크의 수는 증가하지만 arm의 질량이 가볍게 되어, 링크 파라미터의 설정에 의하여 원심력 등의 비선형력이 없어지며 동시에 모터사이의 비간섭화를 실현할 수 있다. 그리고 평행링크 DD로븟 매니퓰레이터의 고정도 운전의 실현을 위하여 신경회로망을 이용한 학습제어계를 설계하여 학습속도의 개선과 함께 변화한 작업대상에의 적응력을 개선하기 위하여 신경회로망과 피드백제어기로 학습제어 알고리즘을 구성한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.776-778
• /
• 1997

We propose a remote controller for a SCARA typed direct drive manipulator with two degrees-of-freedom(DOF). A remote controller system for SCARA robot of DDA is designed using a 2 DSP (TMS320c31) board and Winsock(Internet program class library supplied by Microsoft). The design objective of the system is to implement real time dynamic control algorithms which have been tested only by simulations so far and remote control regardless of the distance between user and robot. Because this system runs on Win95, we developed a VxD program to communicate with DSP controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.895-901
• /
• 1993

This paper present controller designs based on the configuration control framework for a redundant manipulator to accomplish the basic task of desired, end-effector motion, while utilizing the redundancy to achieve the additional tasks such as joint motion control, obstacle avoidance, singularity avoidance. etc. A task based decentralized adaptive scheme is then applied for the configuration variables to track some reference trajectories as close as possible. Simulation results for a direct-drive three-link arm in the vertical plane demonstrate its capabilities for performing various useful tasks.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.705-710
• /
• 1989

A practical method of identifying the inertial parameters, viscous friction and Coulomb friction of a robot is presented. The parameters in the dynamic equations of a robot are obtained from the measurements of the command voltage and the joint position of the robot. First, a dynamic model of the integrated motor and manipulator is derived. An off line parameter identification procedure is developed and applied to the University of Minnesota Direct Drive Robot. To evaluate the accuracy of the parameters the dynamic tracking of robot was tested. The trajectory errors were significantly reduced when the identified dynamic parameters were used.