• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.2
• /
• pp.185-194
• /
• 2019

Objective: This study was conducted to investigate the intensity of the extremely low frequency magnetic fields(ELF-MF) generated inside of the cabins during subway operation. Methods: The ELF-MF intensity were investigated on 30 subway lines in Korea, including in the Greater Seoul Metropolitan Area(Seoul and Gyeonggi-do Province), Incheon, Busan, Daegu, Daejeon, and Gwangju. ELF-MF intensity was measured at 0.9 m from the floor using EMDEX II meters with a resolution of $0.01{\mu}T$. All data were collected every three seconds and analyzed with EMCALC 2013 version 3.0B software. Basic characteristics of subway operation, including alternative current(AC) or direct current(DC), voltage level, and opening year of the line were investigated. Real-time information during measurement, such as the time of departure, moving and arrival of trains, were also recorded. Results: The arithmetic mean(AM) and maximum(Max) intensity of ELF-MF were $0.62{\mu}T$ and $11.51{\mu}T$, respectively. Compared by region, the ELF-MF intensity measured inside cabin were the highest in the Seoul Metropolitan Area($AM=0.80{\mu}T$), followed by Busan($AM=0.30{\mu}T$), Daegu($AM=0.29{\mu}T$), Incheon($AM=0.14{\mu}T$), Gwangju($AM=0.04{\mu}T$) and Daejeon($AM=0.03{\mu}T$). The average ELF-MF level measured in AC trains($AM=1.36{\mu}T$) was also significantly higher than in DC trains($AM=0.28{\mu}T$). In terms of the opening year of the subway, trains opened before 1990($AM=0.85{\mu}T$) was the highest and the lowest was 2000-2009($AM=0.24{\mu}T$). Conclusions: The AC supply has the greatest influence on the generation of the ELF-MF intensity in subway cabins.

• Carbon letters
• /
• v.22
• /
• pp.25-35
• /
• 2017

The aim of the work was to investigate the thermo-electrical properties of low cost and rapidly produced randomly oriented carbon/carbon (C/C) composite. The composite body was fabricated by combining the high-pressure hot-pressing (HP) method with the low-pressure impregnation thermosetting carbonization (ITC) method. After the ITC method step selected samples were graphitized at $3000^{\circ}C$. Detailed characterization of the samples' physical properties and thermal properties, including thermal diffusivity, thermal conductivity, specific heat and coefficient of thermal expansion, was carried out. Additionally, direct current (DC) electrical conductivity in both the in-plane and through-plane directions was evaluated. The results indicated that after graphitization the specimens had excellent carbon purity (99.9 %) as compared to that after carbonization (98.1). The results further showed an increasing trend in thermal conductivity with temperature for the carbonized samples and a decreasing trend in thermal conductivity with temperature for graphitized samples. The influence of the thickness of the test specimen on the thermal conductivity was found to be negligible. Further, all of the specimens after graphitization displayed an enormous increase in electrical conductivity (from 190 to 565 and 595 to 1180 S/cm in the through-plane and in-plane directions, respectively).

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.10
• /
• pp.82-92
• /
• 2005

The present study was carried out in order to develop a remote-controlled micro ornithopter with a weight of 20 gram. This ornithopter has three channel radio control. It runs on two direct-current type pager motors powered by a lithium polymer battery which flaps its 35cm wings. The performance of an ornithopter, applied to a flapping motion only, was validated by flight tests. The flight test results indicate that the ornithopter developed here has sufficient thrust to propel itself.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.3
• /
• pp.40-46
• /
• 2009

Toroidally-wound brushless direct-current (BLOC) machines are compact, highly efficient, and can work across a large magnetic gap. For these reasons, they have been used in pumps, flywheel energy storage systems and left ventricular assist devices among others. The common feature of these systems is a spinning rotor supported by a set of (either mechanical or magnetic) bearings. From the view point of dynamics, it is desirable to increase the first critical speed of the rotor so that it can run at a higher operating speed. The first critical speed of the rotor is determined by the radial stiffnesses of the bearings and the rotor mass. The motor also affects the first critical speed if the rotor is displaced from the rotating center. In this paper, we analytically derive the flux density distribution in a toroidally-wound BLOC machine and also derive the negative stiffness of the motor, based on the assumption that the rotor displacement perturbs the flux density distribution linearly. The estimated negative stiffness is validated by finite element analyses.

• Korean Journal of Veterinary Research
• /
• v.33 no.1
• /
• pp.171-178
• /
• 1993

The present study was carried out to investigate the developmental potency to blastocyst after freezing and thawing of nuclear transplanted 2-cell embryos. The nuclei from 2-, 4- and 8-cell mouse embryos were transferred into enucleated 2-cell embryos, and the reconstituted embryos were submitted to direct current(DC) pulse at output voltage of 2.0 kV/cm for $100{\mu}$ sec to induce cell fusion. The recovery rate and developmental potency to blastocyst after freezing and thawing of nuclear transplanted 2-cell embryos was investigated. 1. The recovery rate of nuclear transplanted 2-cell embryos in normal morphology after freezing and thawing was significantly higher in rapid freezing(DMSO 4.5M) than in slow cooling(p<0.01). 2. When the recovered embryos in normal morphology were cultured in vitro, there were no significant differences in the developmental potency to blastocyst between the freezing methods and the concentrations of cryoprotectant. In summary, these experiments have proved that rapid freezing method(DMSO 4.5M) is effective in nuclear transplanted 2-cell mouse embryos. If improved micromanipulation techniques and freezing are combined, nuclear transplantation technique will contribute to the improvement of productivity in livestock animals.

• Journal of the Korean Society for Heat Treatment
• /
• v.30 no.4
• /
• pp.151-155
• /
• 2017

The ZTO single layer and ZTO/Ag/ZTO tri-layer films were deposited on glass substrates by using the radio frequency (RF) and direct current (DC) magnetron sputtering and then rapid thermal annealed (RTA) in a low pressure condition for 10 minutes at 150 and $300^{\circ}C$, respectively. As deposited tri-layer films show the 81.7% of visible transmittance and $4.88{\times}10^{-5}{\Omega}cm$ of electrical resistivity, while the films annealed at $300^{\circ}C$ show the increased visible transmittance of 82.8%. The electrical resistivity also decreased as low as $3.64{\times}10^{-5}{\Omega}cm$. From the observed results, it is concluded that rapid thermal annealing (RTA) is an attractive post-deposition process to optimize the opto-elecrtical properties of ZTO/Ag/ZTO tri-layer films for the various display applications.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.11
• /
• pp.1408-1414
• /
• 2018

Recently, as a solution to the problem of maintaining system reliability, stability, and quality occurring worldwide, such as activation of smart grid and recognition of super grid and rapid grid interconnection of renewable energy sources HVDC(High Voltage Direct Current) will appear on the front of the electric power system. These concepts are also very important concepts in HVDC systems. When the HVDC system is linked to the existing power system, it is composed of AC/DC/AC conversion device, and these conversion devices are composed of many thyristors. These parts(Devices) are connected in a complicated manner, and they belong to the one with a higher failure rate. However, the problem of establishing the concept of failure rate of HVDC parts directly linked to economic efficiency and the understanding accompanying it are still insufficient. Therefore, in this paper, we establish the meaning of reliability in power system and try to develop a model to analyze and verify the failure rate data of HVDC based on this.

• Journal of the Korean Society for Heat Treatment
• /
• v.28 no.6
• /
• pp.296-299
• /
• 2015

$In_2O_3/Ti$ bi-layered films were deposited on glass substrate at room temperature with radio frequency (RF) and direct current (DC) magnetron sputtering to consider the effect of Ti buffer layer on the electrical and optical properties. In a comparison of figure of merit, $In_2O_3$ 90 nm/Ti 10 nm thin films show the higher opto-electrical performance of $3.0{\times}10^{-4}{\Omega}^{-1}$ than that of the $In_2O_3$ single layer films ($2.6{\times}10^{-4}{\Omega}^{-1}$). From the observed results, it is supposed that the $In_2O_3\;90nm/TiO_2$ 10 nm bi-layered films may be an alternative candidate for transparent electrode in a transparent thin film transistor device.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1632-1635
• /
• 2007

We developed a novel growth method of CNTs on metal substrate for device applications, deposited by a triode direct current plasma enhanced chemical vapor deposition (dc-PECVD). With resist-assisted patterning (RAP) method, we had grown CNTs on metal substrate, which were strongly bonded with metal substrate.

• Transactions on Electrical and Electronic Materials
• /
• v.17 no.2
• /
• pp.121-124
• /
• 2016

ZnSnO₃ (ZTO)/Ag/ ZnSnO₃ (ZTO) trilayer films were prepared on glass substrates by radio frequency (RF) and direct current (DC) magnetron sputtering. The electrical resistivity and optical transmittance of the films were investigated as a function of the Ag interlayer thickness. ZTO films with a 15 nm thick Ag interlayer show the highest average visible transmittance (83.2%) in the visible range. In this study, the highest figure of merit (2.1×10⁻² Ω cm) is obtained with the ZTO 50 nm/Ag 15 nm/ZTO 50 nm films. The enhanced optical and electrical properties of ZTO films with a 15 nm thick Ag interlayer are attributed to the crystallization of the Ag interlayer, as supported by the distinct XRD pattern of the Ag (111) peaks. From the observed results, higher optical and electrical performance of the ZTO film with a 15 nm thick Ag interlayer seems to make a promising alternative to conventional transparent conductive ITO films.