• Journal of Dental Rehabilitation and Applied Science
• /
• v.31 no.1
• /
• pp.26-32
• /
• 2015

Purpose: The main purpose of this study is to suggest application plan of dipping method by comparing & analysing the difference between addition method and dipping method in the manufacture of metal-ceramic substructure of maxillary central incisor (#1), followed by assessing the work efficiency. Materials and Methods: Master die and hard plaster-copied one were produced and then a total of 20 copies, 10 copies for each through addition method and dipping method, were manufactured and experimented. Copings were fixed on the abutment model and invested in epoxy mounting cup. Samples were cut in labial and lingual direction, using cutter and then rubbed on sandpaper, whose 4 points were measured by using digital microscope. Results: The comparison of mean values by using t-test, parametric statistical method, shows overall significant difference (P < 0.05). Conclusion: The result of this study can be suggested as an application plan, since there is no significant difference between addition method and dipping method in the manufacture of metal-ceramic substructure.

• Polymer(Korea)
• /
• v.38 no.2
• /
• pp.188-192
• /
• 2014

In this work, it is possible to simply improve the molecular ordering of a conjugated polymer thin film by dipping into poor solvent. The structural order, optical, and electrical properties of poly(3-hexylthiophene) (P3HT) films were profoundly influenced by dipping time and solubility of solvent. Especially the dipping time in methylene chloride was controlled to efficiently improve the molecular ordering of the P3HT. The correlation between the structural order and the electrical properties was used to optimize the dipping time in the appropriate solvent.

• Journal of Biomedical Engineering Research
• /
• v.18 no.3
• /
• pp.217-222
• /
• 1997

Hydroxyapatite(HA)-coated metal composites were made by the dipping method. The specimen substrates were Ti plates with a thickness of 2 mm. The HA coating was carried out in HA-sol for 1 min by the dipping method. The concentration of HA-sol for the coating ranged from 3.28 to 9.99 wt%. Excellent coating was observed on Ti substrate dipped once in 9.99 wt% sol. Preparation of Ti plates by sandblasting provided the better environment for coating HA on Ti surface than non-treated surface. As the concentration of sol increased, the weight change and the coating thickness increased. Above 7 wt% sol, they increased sharply.

• Korean journal of applied entomology
• /
• v.31 no.4
• /
• pp.452-460
• /
• 1992

To establish the economical and reliable routine bioassay system for developing new insecticidal compounds, effects of leaf-dipping time, application methods, insect species and their developmental stages on susceptibilities of insects to insecticides were studied. The stable insecticidal activity appeared at the dipping time for 30-60 seconds in leaf-dipping method, and the most effective application methods were leaf-dipping method for apterous green peach aphid adults, and third instars of diamond-back moth and tobacco cutworm, whereas seedling+insect spray method for adults or third instars of brown planthoppers. For two-spotted spider mite, leaf-dipping or intact plant spray method was favorable. In the bioassay for chitin synthesis inhibitors, the inoculation of third instars of brown planthopper, diamond-back moth, tobacco cutworm and green peach aphid, and larvae of two-spotted spider mite to the young host plants treated by spray method were adequate bioassay methods.

• Journal of Technologic Dentistry
• /
• v.35 no.3
• /
• pp.185-192
• /
• 2013

Purpose: The aim of this study was to compare with color reproducibility of the coating method and dipping method using a colour liquid. Methods: Two groups of square-shaped specimens ($10mm{\times}10mm$ in diameter, 1.5mm thickness) were prepared for analysis(n=15/group). The CM(Coating Method) group was fabricated as full zirconia specimens with the coating coloring method and Group DM(Dipping Method) was prepared as specimens of 0.7 mm-thick zirconia plate using the dipping coloring method and veneered with 0.8mm-thick porcelain. Color parameters were measured with ShadeEye $NCC^{(R)}$ spectrophotometer and color differences were calculated using the equation ${\Delta}E^*= \{({\Delta}L^*)^2+({\Delta}a^*)^2+({\Delta}b^*)^2\}^{1/2}$. Non-parametric statistical methods, the Mann-Whitney test, and the Kruskal-Wallis test were used to analyze the data. Type one error rate was set at 0.05. Results: Color difference values larger than 7 were observed between specimens with the coating method and the dipping method, which were detectable difference in a clinical setting. Conclusion: Cautious application of the coating coloring method in a clinical setting and further researches to standardize the coating method are needed.

• The Korean Journal of Pesticide Science
• /
• v.7 no.4
• /
• pp.296-301
• /
• 2003

This study was conducted to select low toxic insecticides against natural enemies, and to evaluate resistance stability and cross-resistance to resistance strain for the fulfillment of integrated pest management development. Toxicity of imidacloprid and spinosad to Amblyseius cucumeris was relatively low regardless of the adopting test methods. In addition, those to the Amblyseius fallacis was also low by slide dipping method. The slide dipping method was useful to eliminate repellency effect by mites to the tested insecticides. Mortality of A. fallacis to deltamethrin recorded in 1994 and 1999 was 21.6% and 7.4%, respectively. Meanwhile, the permethrin-resistanct strain of A. fallacis was maintained its resistance to deltamethrin. However, the cross-resistance to the newly introduced insecticides namely imidacloprid, fipronil, chlorfenapyr, abamectin, and spinosad. was relatively low.

• Proceedings of the KAIS Fall Conference
• /
• 2002.05a
• /
• pp.187-189
• /
• 2002

잠김 방식(dipping)을 사용하여 안료에 의한 색상 렌즈를 제작하였다. 본 논문에서는 안료의 종류에 따른 색상 농도의 변화를 중심으로 조사한 바를 발표한다. 색상 렌즈는 안경 산업의 발전과 함께 새로운 수요를 창출하게 뭔 것이다.

• Food Science and Preservation
• /
• v.7 no.1
• /
• pp.8-11
• /
• 2000

The antimicrobial extracts of rheum palmatum and coptis chinensis root as well as grapefruit seed extract(GFSE) were applied to dipping treatment for keeping qualities of cucumbers, respectively, which were then packed in low density polyethylene(LDPE) films incorporated with 1 % antimicrobial extracts and stored $10^{\circ}C$. Dipping and packaging in the antimicrobial agents suppressed the growth of putrefactive microorgani는 and the decay ratio of cucumbers. In addition, the loss ratio of ascortic acid content and their weight was decreased during the sotrage of cucumbers. Consequently, the combined method of dippinf and packaging in antimicrobial agents turned out to be superior to dipping treatment or film-packaging in the view point of decay ratio and the keeping qualities of cucumbers.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.11
• /
• pp.3340-3344
• /
• 2013

The fabrication of polymer field-effect transistors with good electrical properties requires the minimization of molecular defects caused by low molecular weight (MW) fractions of a conjugated polymer. Here we report that the electrical properties of a narrow bandgap conjugated polymer could be dramatically improved as a result of dipping a thin film into a poor solvent. The dipping time in hexanes was controlled to efficiently eliminate the low molecular weight fractions and concomitantly improve the molecular ordering of the conjugated polymer. The correlation between the structural order and the electrical properties was used to optimize the dipping time and investigate the effects of the low MW fraction on the electrical properties of the resulting thin film.

• The Korean Journal of Pesticide Science
• /
• v.12 no.2
• /
• pp.177-183
• /
• 2008

For the development of integrated pest management system by harmonizing biological and chemical control, some experiments were carried out to select low toxic pesticides against natural enemies. Leaf dipping method, body dipping method, and diet treatment method were used for the toxicity evaluation against Microplites mediator adults. We tested 49 different pesticides (34 insecticides, 11 fungicides, 4 herbicides) at recommending concentration commonly used to control insect pests, disease and up-land weeds in chinese cabbage field. 16 insecticides, 11 fungicides, and 4 herbicides were shown to be low toxic to Microplites mediator adults in the treatment of body dipping.