• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1986.04a
• /
• pp.107-112
• /
• 1986

This paper presents one method to resolve the end-to-end digital connectivity through 2-wire subscriber loop. This system which consists of the subscriber`s device and the line termination device makes use of the advantages of time compressed multiplexing and modified DPSK. Experimental results show that the transmission range of the lab test covers 2km and that of the field test covers 1.5km.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.990-993
• /
• 1987

A digital subscriber loop transmission is a key technology to provide end-to-end digital connectivity for Integrated Service Network. And the equalization of the signal is needed for a fully digitalized connection between subscriber's premises because of the limited transmission characteristics of existing subscriber loop. This paper describes the switched capacitor equalizer for the 2B+D data transmission in TCH on existing subscriber loops.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.5
• /
• pp.990-1006
• /
• 1997

This paper describes an interface function and its performance assessment for high-bit-rate digital subscriber line (HDSL) under ATM. The interface of HDSL function of ATM system was achieved by HDSL subscriber physical layer board assembly(HSPA) which was modeled as design standard for ATM. We have presented a new worst case of subscriber line conditions from existing results of investigations on impairments such as crosstalk, impulse noise, longitudinal, power line noise and others. We have measured the maximum service loop length available by HDSL, and found that HSPA, at a 2.048Mbps data transmission, is possible within a carrier serving area(CSA) under the worst case loop noise conditions at an error rate or 10$^{-7}$ on a two coordinated unshielded twisted pairs in the presense of impairments. We conclude tht, in terms of a performance-per-lin simulator, the HSPA is an excellent candidate for HDSL implementation under ATM.

• Proceedings of the KIEE Conference
• /
• 1998.07e
• /
• pp.1852-1854
• /
• 1998

In this paper, we design an effective and secure optical subscriber loop to offer multimedia service to apartment residents. The designed subscriber loop has the following properties. First, a proxy is connected to HDT(Host Digital Termination) which is a switching device, in order to effectively support multimedia services. Second, a scheduler of HDT dynamically manages bandwidth allocation and reallocation to a subscriber considering the situation of communication traffic. Finally, three alternations are used for safety.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.3
• /
• pp.387-393
• /
• 1987

The introduction of a digiral subscriber loop transmission system necessitates an optimized line interface solution. To meet this objective an adaptive line equalizer has been developed. The equalizer can be compensated up to 42 dB line loss at 200KHz, and operated up to 3.2 Km transmission length (0.4 mm\ulcornercable)at a rate of 400Kb/s. This has been builted using a variable \ulcorner equalizer to compensate a frequency-attenuation characteristics of metallic cable, an AGC (automatic gain control) circuits with simple control algorithm, and various filters to minimize a transmission constraints over subscriber loop. The purpose of this paper is to present a short description of a design of the adaptive line equalizer with a summary of implementation results. Some design concepts and considerations which results in an implementation of the equalizer are also given.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.2
• /
• pp.293-305
• /
• 1994

In this paper the efficient channel models of the subscriber loops for the ISDN U-interface digital transmission are presented. Several configuration medels of the loop network are adopted from the CCITT recommendations, and various parameters specifying the physical dimensions are determined in accordance with the measurements of the loop characteristics of Korea. A typical loop interfacing circuit is applied at both ends of the loops and the overall transmissing circuit model is obtained. Based on this circuit model of transmission. 3 types of signal path models, related to transmission, echo, and near end crosstalk noise are defined and their transfer function are respectively derived as the channel models. As examples of the proposed channel models, numerical calculation has been performed for some loop configuration models and the channel responses are investigation in both domains of frequency and time. It is shown that various changes of the loop characteristics can well be explained in terms of the proposed models. And these models can efficiently be used for the simulation of the digital transmission over the subscriber loop.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.6
• /
• pp.1562-1574
• /
• 1998

We, in this paper, have implemented T1, E1 and fractional E1 HDSL(High-bit-rate digital subscriber line) function over an ATM switching system. The maxi$\mu$ loop lengths for subscriber service and cell loss rates to meet the bit error rate of 10$^{-7}$ at transmission of 2B1Q HDSL data E1 rate over existing telephone copper wires in the presence of the significant impairments such as NEXT(Nearned crosstalk), impulse noise, power line noise and longitudinal over the CSAs environment consisting of 26 gauge and 25 gauge unloaded copper telephone lines has assessed. HDSL will intially be used to serve private-DS1, ISDN-BRA, and DLC feeders, later DS1 extension from optic fiber cable. We also present market provision for the HDSL.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.7
• /
• pp.1424-1428
• /
• 2004

In this paper, CMOS analog filters for use in the Analog front End of digital subscriber loop(DSL) chip set are proposed. Designed filters contain receiver continuous-time filters which are composed of lowpass and highpass functions. And their cutoff frequency are 138H1z and 1.1MHz respectively. A low-voltage gm-c integrator is improved and used to design filters. Desisned filters are verified by HSPICE simulation with the 0.25${\mu}m$ CMOS n-well parameter.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.11
• /
• pp.29-39
• /
• 1993

For an economical or timely reason, the types of subscriber loops for ISDN basic rate access service will, at least initially, be that of the pre-existing telephone network, that is, 2-wire twisted-pair metallic cable. Therefore, it is important to assess the high-speed digital transmission capability of the 2-wire subscriber loops. In this paper, the impairments such as intersymbol interference, crosstalk, and impulse niose are modeled. And then, symbol error probabilities in terms of SNR in DSL system using ECH and 2B1Q line code are analytically derived and numerically calculated. Also, the relationship between the quality of service required in ISDN subscriber section and the loop parameters is investigated.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.9
• /
• pp.2378-2390
• /
• 1997

We, in this paper, have implemented E1 HDSL(high-bit-rate digital subscriber line) function over an ATM switching system. The maximum loop lengths for subscriber service and cell loss rates to meet the bit error rate of $10^{-7}$ at transmission of 2B1Q HDSL data of E1 rate over existing telephone copper wires in the presense of the significant impairments such as crosstalk, impulse noise, power line noise and longitudinal over the CSAs environment consisting of 26 gauge and 24 gauge unloaded copper telephone lines has assessed. We have confirmed the typical media services function such as video on demand(VOD) service for MPEG-1, image conference service and high-speed Internet access service over ATM switching system.