• Korean Journal of Digital Imaging in Medicine
• /
• v.15 no.2
• /
• pp.13-18
• /
• 2013

Purpose : Fluoroscopy equipment, depending on the type of changes that occur in the patient's position ESD and study the patient's scatter ray of ESD Practitioners considered a comparative analysis was to evaluate the correct dose. Materials and Methods : HITACHI four overtube type TU-8000 Flat Detector and Under tube C-Arm Philips' Multi Diagnost Eleva with Flat Detector type were measured by. Each devices is a measure of the patient's esd randophantom position in tabel unfors Xi multi funtion then fixed to the abdomen fluoroscopy and 10 seconds, spot was measured three times, practitioners of the incident surface dose by considering the patient's scatter ray of the table for each device in the average human stomach 21cm thickness acrylic phantom ($25cm{\times}25cm$) Place the practitioner position after position randophantom unfors Xi multi funtion in the thyroid and stomach 1 minute by a fixed one-time fluoroscopy and measured. Results : 10 seconds and the patient perspective of the c-arm ESD 1.2 times smaller on the AP and oblique measurements were measured in the 6-13 times smaller. spot positions to changes in the measured three times on the AP of the abdomen, ESD is 18 times smaller c-arm measurements and the oblique measurement was 19-30 times smaller. And 1 minute at practitioners fluoroscopy esd in the thyroid 2.12 times the c-arm, chest 1.75 times less the dose was measured. On the AP, depending on the device, but the lack of dose difference oblique positions of the two devices depending on changes in the area due to changes in both the AP than on the dose increased, the difference in dose between the two devices, the maximum difference was approximately 27 times. Conclusion : Fluoroscopic equipment at the time of inspection in accordance with changes in dose according to the patient and the patient's positions changes, because the area of the scatter ray considering the change of dose measurements be made, and study of the equipment according to the characteristics of the efficiency and the exposure of the patient and practitioner is considered smooth study equipment manufacturers that can be done is to build the system and think that is also important. Various fluoroscopy when you check future changes in many factors of change in dose for the equipment in the laboratory system by considering the scatter ray radiation shielding for the management to take advantage of reckless undertube have been utilized as more exposure Reduction activities can help is considered as the direction.

• Journal of Digital Convergence
• /
• v.15 no.12
• /
• pp.273-282
• /
• 2017

The purpose of this study is to investigate the changes in the recovery of equipment using full containers loaded with freight instead of direct container transportation according to the sales policy considering the cost of transporting the containers. The EMU operation case was analyzed. The policies implemented by Company A to provide EMU credits depended only on the relative accountability contribution margin per box (RA CMPB) for the profitability of backhaul full freight. Therefore, these policies resulted in limitations in sales based on profitable accountability (PA) CMPB, which is more profitable. Moreover, while some Asian regions have surplus equipment, many Asian destinations to which their freight is exported have equipment shortages. Thus, in some cases, service sales to the regions with surplus equipment generated greater company-wide profits when compared with the return of empty containers or sales to the regions with insufficient equipment. In other words, the conditions for providing EMU credits should be changed, and even the full freight between regions with surplus equipment should be provided with credit amounts in which potential factory and transport costs in a destination are pre-reflected.

• Journal of Digital Convergence
• /
• v.15 no.12
• /
• pp.323-331
• /
• 2017

In this paper, four types of deposition control processes such as temperature, pressure, input/output(I/O), and gas were replaced by the Internet of Things(IoT) to analyze the data load and sequence procedure before and after the application of it. Through this analysis, we designed the load balancing in the sensing area of the deposition process by creating the sequence diagram of the deposition process. In order to do this, we were modeling of the sensor I/O according to the arrival process and derived the result of measuring the load of CPU and memory. As a result, it was confirmed that the reliability on the deposition processes were improved through performing some functions of the equipment controllers by the IoT. As confirmed through this paper, by applying the IoT to the deposition process, it is expected that the stability of the equipment will be improved by minimizing the load on the equipment controller even when the equipment is expanded.

• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.E2
• /
• pp.66-73
• /
• 2007

The introduction of tracer gas techniques to ventilation studies in indoor environments provides valuable information that used to be unattainable from conventional testing environments. Data acquisition systems (DASs) containing analogue-to-digital (A/D) converters are usually used to function the key role that records signals to storage in digital format. In the testing process, there exist a number of components in the measuring equipment which may produce system-based inference to the monitored results. These unwanted fluctuations may cause significant error in data analysis, especially when non-linear algorithms are involved. In this study, a pre-processor is developed and applied to separate the unwanted fluctuations (noise or interference) in raw measurements and to reduce the uncertainty in the measurement. Moving average, notch filter, FIR (Finite Impulse Response) filters, and IIR (Infinite Impulse Response) filters are designed and applied to collect the desired information from the raw measurements. Tracer gas concentrations are monitored during leakage and ventilation tests in the model test room. The signal analysis functions are introduced to carry out the digital signal processing (DSP) work. Overall the FIR filters process the $CO_2$ measurement properly for ventilation rate and mean age of air calculations. It is found that, the Kaiser filter was the most applicable digital filter for pre-processing the tracer gas measurements. Although the IIR filters help to reduce the random noise in the data, they cause considerable changes to the filtered data, which is not desirable.

• Convergence Security Journal
• /
• v.17 no.3
• /
• pp.15-20
• /
• 2017

Cloud computing is a service that to use IT resources (software, storage, server, network) through various equipment in an Internet-enabled environment. Due to convenience, efficiency, and cost reduction, the utilization rate has increased recently. However, Cloud providers have become targets for attack Also, Abuse of cloud service is considered as the top security threat. The existing digital forensic procedures are suitable for investigations on individual terminals. In this paper, we propose a new investigation model by analyzing the vulnerable points that occur when you investigate the cloud environment with the existing digital forensic investigation procedure. The proposed investigation model adds a way to obtain account information, and can apply public cloud and private cloud together. Cloud services are also easily accessible and are likely to destroy digital evidence. Therefore, the investigation model was reinforced by adding an account access blocking step.

• Genomics & Informatics
• /
• v.21 no.2
• /
• pp.24.1-24.7
• /
• 2023

Assays of clinical diagnosis and species identification using molecular markers are performed according to a quantitative method in consideration of sensitivity, cost, speed, convenience, and specificity. However, typical polymerase chain reaction (PCR) assay is difficult to quantify and have various limitations. In addition, to perform quantitative analysis with the quantitative real-time PCR (qRT-PCR) equipment, a standard curve or normalization using reference genes is essential. Within the last a decade, previous studies have reported that the digital PCR (dPCR) assay, a third-generation PCR, can be applied in various fields by overcoming the shortcomings of typical PCR and qRT-PCR assays. We selected Stilla Naica System (Stilla Technologies), Droplet Digital PCR Technology (Bio-Rad), and Lab on an Array Digital Real-Time PCR analyzer system (OPTOLANE) for comparative analysis among the various droplet digital PCR platforms currently in use commercially. Our previous study discovered a molecular marker that can distinguish Hanwoo species (Korean native cattle) using Hanwoo-specific genomic structural variation. Here, we report the pros and cons of the operation of each dPCR platform from various perspectives using this species identification marker. In conclusion, we hope that this study will help researchers to select suitable dPCR platforms according to their purpose and resources.

• Journal of Korean Society of Rural Planning
• /
• v.24 no.4
• /
• pp.121-134
• /
• 2018

By using the raw data of the 2015 Agriculture, Forestry and Fishery Consensus that surveyed the farmers engaged in agriculture, forestry and fishery in 2015, this study investigated the effects of the characteristics of the farms in Gangwon-do on the utilization of the digital devices, which was classified into computers usage only, smartphones usage only, both computers and smartphones usage, and no digital device usage. This study used the Multinomial Logit Model for the above purpose. Moreover, the IIA(Independence of Irrelevant Alternatives) method of the Multinomial Logit Model was analyzed to be suitable. Upon the result of the analysis, when all the other variables were constant in the average, the probability of choosing both computers and smartphones increased by 0.02% as the family member living together with the farm owner increased by 1 person. In addition, the farms with agricultural machineries have 0.03% increased probability of using smartphones to sell their agricultural products, when compared with the farms without agricultural machinery. Moreover, for the farms with high sales profit of the agricultural products, the probability of using computers and the probability of using smartphones increased by 0.04% and 0.01%, respectively, and the probability of using both computers and smartphones increased by 0.02%. On the other hand, for the farms affiliated with the agricultural organization, the probability of using both computers and smartphones increased by 0.17%, and the probability of using only smartphones and the probability of using only computers increased by 0.16% and 0.15%, respectively. In case of selling to the National Agricultural Cooperative Federation(NACF), the probability of using smartphones increased by 0.11% if all other variables were to be constant in the average. In particular, the farms participating in the agriculture-related industries have 1.09% increased probability of using computers, have 0.92% increased probability of using smartphones, and 0.85% increased probability of using both computers and smartphones. Therefore, the implications suggested based on the results of the analysis are as follows. First, the farms' choices of the digital devices are made independently. Hence, the future agricultural industry business platform establishment should necessarily consider the types of farms' choices of the digital devices in the future. Second, since the usage of digital devices has a generally positive influence on the farm household income, digital education to improve farmers' ability to use the digital devices should be urgently provided in order to improve the farm household income in the farms in Gangwon-do. Third, because the digital devices used to sell agricultural products differ depending on the age of the farm owner, it would be desirable to target the younger generation of the farm owners rather than establishing the agricultural industry business platform for the farms in the aged farm villages. Fourth, it would be advisable for the future agricultural business platform to consider the characteristics of agricultural products sales source.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.7
• /
• pp.569-576
• /
• 2014

Sensor node means a device to include sensor, amplifier, and data acquisition (DAQ) equipment. The sensor converts physical signals to electric signals and weak signals from the sensor can be amplified through the amplifier. DAQ equipment converts analog signal to digital signal and collects converted digital signal. Since the sensor node is sensitive to the environment so that selection of mounting position and fixture design of sensor are applied differently depending on the characteristics of a target. This study is about designing and manufacturing sensor node to be used in a machine tool. The environment of machine tool is very severe due to noise, temperature fluctuation, and dust, etc. Hence, the sensor and amplifier must be designed and manufactured by considering the environmental issues. The designed and manufactured sensor node was tested for the reliability and effectiveness of the developed sensor nodes in the study.

• Proceedings of the KIPE Conference
• /
• 2001.12a
• /
• pp.83-88
• /
• 2001

This paper deals with the economical equipment control which is used by internet network system at the industrial workplace. If the control devices can be accessed by internet, we can have the developed possibility of work conditions. In this paper, we presented the advanced digital timer which has a communication function to control and observe panel to realize control solution based on internet to be easily applicable at workplace with low cost. and we used 485 serial communication module to have parallel expansibility and safety. And, this system was experimented and designed for easy system management and status check from remote station through internet As the result of experiment, the circuit configuration would be more simplified than the existing, and it is expected that multi connection control and monitoring can be simply implemented with low cost equipment at industrial workplace.

• Journal of Digital Contents Society
• /
• v.13 no.4
• /
• pp.491-500
• /
• 2012

In this paper, a new loopback BIST structure which is effective to test RF transceiver chip and LNA(Low Noise Amplifier) in the chip is presented. Because the presented BIST structure uses a baseband processor in the chip as a tester while the system is under testing mode, the developed test technique has an advantage of performing test application and test evaluation in effectiveness. The presented BIST structure can change high frequency test output signals to a low frequency signals which can make the CUT(circuits under test) tested easily. By using this technique, the necessity of RF test equipment can be mostly reduced. The test time and test cost of RF circuits can be cut down by using proposed BIST structure, and finally the total chip manufacturing costs can be reduced.