Browse > Article
http://dx.doi.org/10.7736/KSPE.2014.31.7.569

Designing and Manufacturing Technology of Sensor Node for Machine Tools  

Jang, D.Y. (MSDE Program, Seoul Tech)
Kwon, O.S. (Research Center for High Precision Sensor, Korea Electronics-Machinery Convergence Technology Institute)
Park, M.J. (Research Center for High Precision Sensor, Korea Electronics-Machinery Convergence Technology Institute)
Kim, S.J. (Research Center for High Precision Sensor, Korea Electronics-Machinery Convergence Technology Institute)
Publication Information
Journal of the Korean Society for Precision Engineering / v.31, no.7, 2014 , pp. 569-576 More about this Journal
Abstract
Sensor node means a device to include sensor, amplifier, and data acquisition (DAQ) equipment. The sensor converts physical signals to electric signals and weak signals from the sensor can be amplified through the amplifier. DAQ equipment converts analog signal to digital signal and collects converted digital signal. Since the sensor node is sensitive to the environment so that selection of mounting position and fixture design of sensor are applied differently depending on the characteristics of a target. This study is about designing and manufacturing sensor node to be used in a machine tool. The environment of machine tool is very severe due to noise, temperature fluctuation, and dust, etc. Hence, the sensor and amplifier must be designed and manufactured by considering the environmental issues. The designed and manufactured sensor node was tested for the reliability and effectiveness of the developed sensor nodes in the study.
Keywords
Sensor Node; Extreme Environments; Spindle Monitoring; Thermal Displacement Compensation; Cavity Pressure Monitoring;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Kim, I. H., Jang, D. Y., Park, J. H., Park, S. W., and Shim, P. S., "Development of Thermal Displacement Compensation Sensor for High Reliability Machine Tools," J. Korean Soc. Precis. Eng., Vol. 28, No. 8, pp. 886-893, 2011.   과학기술학회마을
2 Lee, H. J., "Design of the CMOS Charge Amplifier Circuit for the Detection of MEMS Cantilever Signal," M.Sc. Thesis, Department of Computer Science and Engineering, Seoul National University, 2007.
3 Kwon, O. S., Jang, D. Y., Park, M. J., and Kim, S. J., "A Study of Standardization for Charge Amplifier of Pressure Sensor," Proc. of KSPE Autumn Conference, pp. 521-522, 2013.
4 Choi, J. H., Kim, I. H., Park, S. W., and Jang, D. Y., "1-axis Displacement Sensor for Compensation Thermal Error of High-Speed Spindle," Proc. of KSPE Spring Conference, pp. 113-114, 2010.
5 Ahn, H.-J. and Jeon, S., "Error Analysis of a New Cylindrical Capacitive Sensor (CCS) for Measuring Five-dimensional Motions of a Rotor," Mechanical Systems and Signal Processing, Vol. 29, pp. 148-163, 2012.   DOI   ScienceOn