• Journal of information and communication convergence engineering
• /
• 제11권3호
• /
• pp.167-172
• /
• 2013

Recently, mobile communication systems are suffering from exponentially increasing data traffic. As a promising solution to the increase in data traffic, a coordinated multi-point transmission and reception (CoMP) scheme has been proposed. Although a great deal of research has been done on this new technology, the performance of mobile communication systems with CoMP has not been evaluated properly in a typical indoor environment. To address this, we have developed a system-level simulator and evaluated the performance of mobile communication systems with CoMP. Unlike previous works, we have used an actual antenna pattern in our simulator and link-level results are properly taken into account through link-level abstraction. By using a system-level simulator, we have evaluated the performance of mobile communication systems with CoMP in an indoor environment and found that unlike an outdoor cellular environment, CoMP may not improve the performance of overall mobile communication systems in an indoor environment.

• 대한조선학회논문집
• /
• 제48권6호
• /
• pp.490-500
• /
• 2011

The paradigm that ships are navigated by means of analog navigation devices and caption's experiences is shifted to that ships can be navigated by digital and autonomous navigation systems due to the rapid development of electronics and communication technologies. Hence, all systems deployed in a ship are automated and integrated since corresponding ship systems are not individually operated but integrated and managed under common operating system. In this paper, we overview recent research projects targeted for digitally integrated ships (referred to as digital ships), outline IEC 61162 series, specifying digital interface standards for digital ships, and finally present several issues for further improvement of the IEC 61162 series. In addition, we broadly categorize digital ships into three systems consisting of multiple sub-systems, including a navigation system, a power system, and a automation system in the aspect of operation and function. Corresponding interfacing range and method, as well as interface specification and data types of one system in a digital ship are also described according to sub-systems, respectively.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
• /
• pp.6-8
• /
• 2009

In this paper. we propose receiver algorithms for VHF(Very High Frequency) digital link mode-2(VDL Mode-2) systems. Unlike conventional digital communication systems using the root raised cosine filter as a transmit and receive filter, raised cosine filter is used as a transmit filter in VDL Mode-2 systems. Hence, it is crucial to design and implement the optimum lowpass receive filter by considering the amount of inter-symbol interference and noise performance. On the other hand, due to the short preamble pattern, it is crucial to develop an efficient packet detection algorithm for reliable communication link. In this paper, we design the optimum receive filter and packet detection algorithm and evaluate the performance of receiver adopting the proposed receive filter and packet detection algorithm.

• 전자공학회논문지
• /
• 제49권12호
• /
• pp.142-146
• /
• 2012

Today, the demand for high-speed data communication and mobile communication has exploded. Thus, there is a growing need for optical communication systems that convert large volumes of data to optical signals and that accommodate and transmit the signals across long distances. Digital optical communication with these characteristics consists of a master unit (MU) and a slave unit (SU). However, the digital optical units that are currently commercialized or being developed transmit data without compression. Thus, digital optical communication using these units is restricted by the quantity of optical frames when adding diversity or operating with various combinations of CDMA, WCDMA, WiBro, GSM, LTE, and other mobile communication technologies. This paper suggests the application of a data compression algorithm to a digital signal processor (DSP) chip as a field programmable gate array (FPGA) and a complex programmable logic device (CPLD) of a digital optical unit to add separate optical waves or to transmit complex data without specific changes in design of the optical frame.

• 한국광과학회:학술대회논문집
• /
• 한국광과학회 1998년도 학술대회지
• /
• pp.20-20
• /
• 1998

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 춘계종합학술대회
• /
• pp.568-573
• /
• 2003

본 논문은 지상파TV방송이 디지털방식으로 전환함에 있어 기존의 무선을 이용 한 DTV중계 전송망을 광전변환을 이용한 유선망으로 전송하는 방안을 제작과 실험을 통하여 전송로의 구조적 전기적 특성과 방송망으로서의 적용 가능성을 연구하였다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2019년도 춘계학술대회
• /
• pp.25-28
• /
• 2019

정보통신기술의 발전과 더불어 해상통신 시스템 또한 안전성, 효율성, 정확성 그리고 보안을 목적으로 하는 항해 및 통신 장비 관련 연구가 활발히 진행되고 있다. 그러나 100km 초과 원거리 조업 어선에 대해서 위치파악 및 선박상태 등 어선관리에 어려움을 겪고 있다. 그리하여 본 연구에서는 Digital-HF 통신 시스템을 통한 원거리 선박 안전을 위하여 최적주파수를 선택하고 이 주파수를 이용하여 선박 위치 확인이 가능하도록 한다.

• 디지털산업정보학회논문지
• /
• 제18권2호
• /
• pp.39-48
• /
• 2022

The application of digital technology to instrumentation and control systems in nuclear power plants has overcome many shortcomings of analog technology, but the threat of cybersecurity has increased. Along with other systems, the reactor protection system also uses digital-based equipment, so responding to cybersecurity threats is essential. We generally determine cybersecurity threats according to the role and function of the system. However, since the instrumentation and control system has various systems linked to each other, it is essential to analyze cybersecurity threats together between the connected systems. In this paper, we analyze the cybersecurity threat of the reactor protection system with the associated facilities. To this end, we quantitatively identified the risk of the reactor protection system by considering safety functions, a communication type, the use of analog or digital-based equipment of the associated systems, and the software vulnerability of the configuration module of the reactor protection system.

• 전자공학회논문지
• /
• 제50권1호
• /
• pp.97-101
• /
• 2013

There is a growing need for optical communication systems that convert large volumes of data to optical signals and that accommodate and transmit the signals across long distances. Digital optical communication consists of a master unit (MU) and a slave unit (SU). The MU transmits data to SU using digital optical signals. However, digital optical units that are commercially available or are under development transmit data using two's complement representation. At low input levels, a large number of SSOs (simultaneous switching outputs) are required because of the high rate of bit switching in two's complement, which thereby increases the power noise. This problem reduces the overall system capability because a DSP (digital signal processor) chip (FPGA, CPLD, etc.) cannot be used efficiently and power noise increases. This paper proposes a change from two's complement to a more efficient method that produces less SSO noise and can be applied to existing digital optical units.

• 한국ITS학회 논문지
• /
• 제18권6호
• /
• pp.43-59
• /
• 2019

현재 국내에서 사용되고 있는 교통신호제어기는 220V의 고전압을 신호등에 일대일로 직접 전달하는 스위치 제어 방식이다. 이러한 방식은 교통신호제어기와 신호등들을 연결하는 데 상대적으로 많은 케이블이 소요되고, 또한 감전에 대한 우려가 있다. 이에 따라 도로교통공단에서는 경찰청 교통신호제어기 표준규격서에 디지털 통신 방식을 이용한 디지털 교통신호제어기의 규격을 추가하였다. 본 연구에서는 이러한 표준규격서를 바탕으로 디지털 교통신호제어기를 개발하고자 하였다. 또한 디지털 교통신호제어기와 아날로그 교통신호제어기가 혼재되어 있어도 현재 운영 중인 신호제어시스템에서 운영이 가능함을 검증하였다.