• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.554-557
• /
• 2002

In this paper, PDP driving circuit is designed to show the pattern of still-image with ADS (Address Display Separation) driving method. The designed circuits consist of three stages which are the image processing program, digital logic parts, and power circuits. The Image processing program is designed serial-communication with RS-232C using BASIC language. Digital logic parts design ADS driving signals with Xilinx FPGA and are simulated by ModelSim 5.5f. Power circuits convert output of digital logic parts into high voltage which panel is drived.

• Progress in Superconductivity
• /
• v.9 no.2
• /
• pp.157-161
• /
• 2008

Due to high speed operations and ultra low power consumptions RSFQ logic circuit is a very good candidate for future electronic device. The focus of the RSFQ circuit development has been on the advancement of analog-to-digital converters and microprocessors. Recent works on RSFQ ALU development showed the successful operation of an 1-bit block of ALU at 40 GHz. Recently, the study of an RSFQ analog-to-digital converter has been extended to the development of a single chip RF digital receiver. Compared to the voltage logic circuits, RSFQ circuits operate based on the pulse logic. This naturally leads the circuit structure of RSFQ circuit to be pipelined. Delay time on each pipelined stage determines the ultimate operating speed of the circuit. In simulations, a two junction Josephson transmission line's delay time was about 10 ps, a splitter's 14.5 ps, a switch's 13 ps, a half adder's 67 ps. Optimization of the 4-bit ALU circuit has been made with delay time consideration to operate comfortably at 10 GHz or above.

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.355-358
• /
• 1987

A design of digital position control system with DC Motor is presented. The digital position control system is constructed by power circuits, interface circuits and control circuits using single chip microprocessor (8096). All control functions are implemented on the 16 bit micro-processor requiring only on incremental encoder for speed and position sensing. The control schemes are used by the proportional control for some modifications and braking algorithms. This digital position system offered to the fast response, good steady-state accuracy, flexibility and reliability, Hardware, software features and experimental results of this system are described.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.5
• /
• pp.893-899
• /
• 2008

Behavioral level simulations of LDO voltage regulator and phase locked loop(PLL) are performed with CPPSIM, a behavioral-level simulation tool based on C language. The validity of the simulation tool is examined by modeling analog circuits and simulating the circuits. In addition, the designed PLL adopted digital architecture to possess advantages of digital circuits.

• The Journal of Korean Association of Computer Education
• /
• v.10 no.6
• /
• pp.11-18
• /
• 2007

The proposed virtual laboratory system for digital logic circuits is composed of two main sessions, which are concept-learning session and virtual experiment session by virtual digital kit. During concept-learning session the learners can easily understand the important principles in the digital circuits to be performed. In addition, during virtual laboratory session the virtual experiments are performed by assembling and connecting the circuits on the virtual bread board, applying input voltages, making the output measurements, and comparing and transmitting the virtual experimental data. Every activity done during the virtual laboratory session is recorded on database and will be provided with the learners as a preliminary report form including personal information. Thus, the educators may check out the submitted preliminary report to estimate how well the learners understand the circuit operations. Finally, in order to show the validity of our virtual laboratory system we investigated and analysed the damage rate of real experimental equipment during class and assessed student performance on the five quizzes for one semester.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.3112-3114
• /
• 2000

Recently. internet applications for efficient cyber education have drawn much interests. The world-wide web provides new opportunities for cyber education over the internet. In this paper, we developed the internet-based educational simulator for design and virtual experiment of the digital logic circuits. The proposed simulator provides the improved learning methods which can enhance the educational efficiency in digital theory. If the students execute the Digital simulator on the web. they can simulate in digital circuits through simple mouse manipulation. The proposed digital simulator can be used so that the students can easily understand the well-known digital principles.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.5
• /
• pp.193-197
• /
• 2017

In this paper, we present a low-power delta-sigma based digital frequency synthesizer with high frequency resolution for bio sensor networks. Biomedical radio-frequency (RF) transceivers require miniaturized forms with a long battery life and low power consumption. For the technology scaling, digital circuits have become preferable compared to analog circuits because of the aggressive cost, size, flexibility, and repeatability. Therefore, the digital circuits based on standard-cell library are used to reduce a power consumption. Additionally, a delta-sigma is used for making fractional frequency tuning range. From the simulation, we confirmed that proposed scheme has good performance in accordance with power and frequency resolution.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.9
• /
• pp.15-22
• /
• 2013

A new LED lamp driving technology with a charge pump instead of a conventional DC-DC converter is proposed. The proposed driving technology is used to control the LED lamp with digital dimming. The power loss in the zener diodes is reduced because the charging process of the capacitors is selectively controlled according to the digital control signal. From the experimental results, when dimming four LED lamps simultaneously, the average driving circuit efficiency of 89% is obtained, regardless of the dimming level. White light with color temperature over a range of 2800~7200K was produced by dimming control of red, green, blue and amber LED lamps with the proposed driving circuit. The characteristics of the driving circuits can be changed depending on the characteristics of the R, G, B, and A LED lamps. The efficiency of the driving circuits up to a maximum 89% can also be obtained depending on the combination of LED lamps. The driving technology with digital dimming control for LED lamps proposed in this paper would be effective for obtaining high efficiency in LED driving circuits and remote control of LED lamps using digital communications.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.847-850
• /
• 1998

One of the most difficult problem of designing VLSI is a mixed-circuit design, that is to design circuit containing both analog parts and digital parts. Digital to analog converter and analog to digital converter is a typical case. Especially it can be a serious problem when mixed circuit are put into a large digital circuit like microcontroller. However nowadays this problem is settled by separating analog circuit parts outside the IC. This technique is based on converting a digital signal into a pulse sequence. Then an analog signal is obtained by averaging this pulse sequence at the external low-pass filter. An anlog to digital converter is designed using a stochastic logic instead of a traditional PWM (pulse-width modulation) signal and ins implemente dusing FPGa. Stochastic pulse sequence can be made as a simple circuits and moreover can be mathematically processed by simple circuits -AND gates. The spectral property of stochastic pulse sequence method is better than that of PWM method. So it make easy to design a external low-pass filter. This technique has important advantages, especially the reduction of the ADC cost.

• Journal of information and communication convergence engineering
• /
• v.14 no.4
• /
• pp.268-271
• /
• 2016

An efficient inductive switching noise suppression technique for mixed-signal integrated circuits (ICs) using standard CMOS digital technology is proposed. The proposed design technique uses a parallel RC circuit, which provides a damping path for the switching noise. The proposed design technique is used for designing a mixed-signal circuit composed of a ring oscillator, a digital output buffer, and an analog noise sensor node for $0.13-{\mu}m$ CMOS digital IC technology. Simulation results show a 47% reduction in the on-chip inductive switching noise coupling from the noisy digital to the analog blocks in the same substrate without an additional propagation delay. The increased power consumption due to the damping resistor is only 67% of that of the conventional source damping technique. This design can be widely used for any kind of analog and high frequency digital mixed-signal circuits in CMOS technology