• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.1
• /
• pp.82-88
• /
• 2008

In this paper, Runge-Kutta (RK)-Butcher algorithm is proposed to study the periodic and oscillatory problems. Simulation results obtained using RK-Butcher algorithms and the classical fourth order Runge-Kutta (RK(4)) methods are compared with the exact solutions of a few periodic and oscillatory problems to confirm the performance of the proposed algorithm. The simulation results from RK-Butcher algorithms are always found to be very close to the exact solutions of these problems. Further, it is found that the RK-Butcher algorithm is superior when compared to RK(4) methods in terms of accuracy. The RK-Butcher algorithm can be easily implemented in a programming language and a more accurate solution may be obtained for any length of time. RK-Butcher algorithm is applicable as a good numerical algorithm for studying the problems of orbit and two body as it gives the nearly identical solutions.

• Restorative Dentistry and Endodontics
• /
• v.12 no.1
• /
• pp.155-163
• /
• 1986

The purpose of this study was to measure penetration of dye stuff (2% Methylene blue, 2% Hematoxylin, 2% crystal violet and 2% safranin-O) on unfilled resin (Lang Dental MFG Co.) Hipol (Boopyung Dental Chemical Co. Macrocomposite resin) Durafill (Kulzer, Co. Microfilled Composite resin) and Heliosit (Vivadent Co. Microfilled Composite resin) The unfilled resin with dough stage was inserted into plastic tuble (5mm in diameter and 4mm in height) with condensation force of 1000 gr, 2000 gr and without condensation force. Hipol mixed on the mixed pad was inserted into the plastic tube by the same method as the unfilled resin. The microfilled resins which were Durafill and Heliosit were polymerized for 60 seconds with the visible light on each surface of the plastic tube which was upper and lower, under condensation force of 1000 gr, 2000 gr and without condensation force. All specimens were stored in the air for 24 hours, then specimens were immersed in the various kind of dye solution for different period of time (1 hour and 24 hours). These dye-treated specimens were polished horizontally until removing 0.5mm of each surface on the emery paper (#1000), and the dye penetration in the polished surface was measured under the digital microscope (Japan Fosuh). Following results were obtained 1. The penetration of dyes was the most excessive in Durafill and was not influenced on the condensation force and the period of immersion time. 2. All dyes were penetrated into Hipol, and Crystal violet was penetrated most excessively in all dyes. 3. The penetration of dye in all resins was not influenced by the period of immersion time and condensation force. 4. There was no evidence of dye penetration in unfilled resin.

• Journal of the Korea Convergence Society
• /
• v.8 no.7
• /
• pp.199-205
• /
• 2017

Despite the economic downturn, the amount of clothing being discarded is increasing due to the fast fashion. The purpose of this study is to propose a fashion sharing service development to settle the rational consumption culture along with the abandoned clothes problem. Shared fashion rental service has attracted as a solution to environmental problems not only when clothes are incinerated but also in manufacturing process, but there is a lack of precedent research. Therefore, this study is meaningful in that it has developed two development plans based on the results of analysis of service case based on three factors by Rachel Botsman. First, active community development. Second, it is the creation of goods through activation of the shared economy. In this study, there are limitations that can't be proved through actual application, so more research is needed through empirical studies on actual users in the future.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.3
• /
• pp.458-464
• /
• 2015

This paper proposes a portable 3-D scanning technique using a laser pointer. 3-D scanning is a process that acquires surface information from an 3-D object. There have been many studies on 3-D scanning. The methods of 3-D scanning are summarized into some methods based on multiple cameras, line lasers, and light pattern recognition. However, those methods has major disadvantages of their high cost and big size for portable appliances such as smartphones and digital cameras. In this paper, a 3-D scanning system using a low-cost and small-sized laser pointer are introduced to solve the problems. To do so, we propose a 3-D localization technique for a laser point. The proposed method consists of two main parts; one is a fast recognition of input images to obtain 2-D information of a point laser and the other is calibration based on the least-squares technique to calculate the 3-D information overall. To verified our method, we carry out experiments. It is proved that the proposed method provides 3-D surface information although the system is constructed by extremely low-cost parts such a chip laser pointer, compared to existing methods. Also, the method can be implemented in small-size; thus, it is enough to use in mobile devices such as smartphones.

• 대한공업교육학회지
• /
• v.31 no.1
• /
• pp.185-199
• /
• 2006

In this paper, to detect lateral direction sound pressure fiber optic sensor using Fabry-Perot interferometeric sensor array was fabricated and experimented. This parallel sensor array composed of one light source and the light split into each sensor using directional coupler and to see the output signal the array system do not need any digital signal processor. As a lateral direction sound source arbitrary sound frequency of 100Hz, 200Hz, and 655Hz using by nondirectional speaker were applied to the array sensor which installed on $60cm{\times}60cm{\times}60cm$ latticed structure. The detected signals from the two sensors were analyzed in the time and frequency domains. It was confirmed that the suggested sensor array detected applied sound source well but there were a little amplitude differences in between the sensors. Because the sensor supported simply at both ends theoretical analysis was performed and its solution was suggested. To compare the theoretical and experimental results arbitrary sound frequency of 2kHz was applied to the sensor array. It shows that experimental results was good agreement with theoretical results.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.122-123
• /
• 2018

The purpose of this study is to investigate the problem of installing VR theme park in Korea and to find a solution for it. VR is expected to play a leading role in the fourth industrial revolution as a new industry, but it is a reality that it is hard to feel its value in actual field. This is a reality that can not move one step further because it is trapped in the existing legal network rather than the essence of VR because it sees VR from the existing law frame. Because VR is regarded as an amusement device in the amusement facility and is regarded as a game, the former is applied to the Tourism Promotion Law and the latter is applied to the game industry law. When one content and hardware are applied to both laws at the same time and other regulations are applied to it, it is practically impossible to operate VR properly. In order to solve this problem, it is necessary to revise each law little by little in each law and amend the law that can apply VR itself. This study is expected to contribute to the revitalization of VR industry by presenting the ultimate problems and solutions in creating VR theme parks in Korea.

• Korean journal of applied entomology
• /
• v.49 no.4
• /
• pp.363-369
• /
• 2010

A postharvest treatment called CATTS (controlled atmosphere and temperature treatment system) has been used as an alternative nonchemical measure for methyl bromide fumigant treatment. This study applied CATTS to control the red flour beetle, Tribolium castaneum, infesting stored grains. Adults of T. castaneum were susceptible to $46^{\circ}C$ heat treatment. The susceptibility was further enhanced by addition of CA conditions (15% $CO_2$ and 1% $O_2$). When CATTS ($46^{\circ}C$, 15% $CO_2$, $16^{\circ}C/h$ treating rate) was applied to different developmental stages of T. castaneum, it showed 100% control efficacy by 120 min exposure. There was a variation in CATTS susceptibility among developmental stages, in which late instar larvae were most tolerant. Heat shock proteins of T. castaneum appeared to be implicated in the tolerance of CATTS.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.1
• /
• pp.73-81
• /
• 2013

This research proposes design and construction of Korean type SWC based on user oriented smart work system. To achieve this proposal, the research suggested improvements of related law, changes to working environment, and strengthening information security for users, stronger Korean ICT based; the study investigated for an efficient and suitable Korean type SWC by analyzing Korean government plans and foreign developed countries' cases. The user-oriented smart work service platform suggested in this study aims to offer a solution to national crisis and establish infrastructure to knowledge-industry and creative-industry by collaborative smart work environment of 'Context Awareness' and 'Tangible User Interface'. As a result, smart work suggests methods to produce creative work by IT workers and efficient work environment for better standing in world competition. In conclusion, Korean SWC system is proved to be superior in satisfaction rate at 75.41%, 20.18% higher than average score shown in 5 categories in 5 countries from USA, Japan, and EU's which was 55.23%.

• Nuclear Engineering and Technology
• /
• v.47 no.6
• /
• pp.729-737
• /
• 2015

Wireless communication technologies, especially smartphones, have become increasingly common. Wireless technology is widely used in general industry and this trend is also expected to grow with the development of wireless technology. However, wireless technology is not currently applied in any domestic operating nuclear power plants (NPPs) because of the highest priority of the safety policy. Wireless technology is required in operating NPPs, however, in order to improve the emergency responses and work efficiency of the operators and maintenance personnel during its operation. The wired telephone network in domestic NPPs can be simply connected to a wireless local area network to use wireless devices. This design change can improve the ability of the operators and personnel to respond to an emergency situation by using important equipment for a safe shutdown. IEEE 802.11 smartphones (Wi-Fi standard), Internet Protocol (IP) phones, personal digital assistant (PDA) for field work, notebooks used with web cameras, and remote site monitoring tablet PCs for on-site testing may be considered as wireless devices that can be used in domestic operating NPPs. Despite its advantages, wireless technology has only been used during the overhaul period in Korean NPPs due to the electromagnetic influence of sensitive equipment and cyber security problems. This paper presents the electromagnetic verification results from major sensitive equipment after using wireless devices in domestic operating NPPs. It also provides a solution for electromagnetic interference/radio frequency interference (EMI/RFI) from portable and fixed wireless devices with a Wi-Fi communication environment within domestic NPPs.

• Journal of Korea Water Resources Association
• /
• v.39 no.12 s.173
• /
• pp.1013-1022
• /
• 2006

Urban flooding is usually caused by the surcharge of storm sewers. For this reason, previous studies on urban flooding are mainly concentrated on the simulation of urban drainage systems. However these approaches that find the pipes which have insufficient drainage capacity are very approximate and unreasonable ways in establishing both flood prevention and flood-loss reduction planning. In this study, a two-dimensional model linked the existing ILLUDAS model is developed to calculate the accurate and resonable solution about urban flood inundation and it is verified by using the simulation of July 2001 flood in Seoul. In the urban area with a small difference of ground elevations, the two-dimensional flood propagation phases must be considered to make a accurate analysis for inundated area and depth. The result of this study can be used to construct fundamental data for a flood control plan and establish a urban flood forecasting/warning system.