• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제4권3호
• /
• pp.149-156
• /
• 2000

This study presents an investigation of the changes that have occurred in the coastal ocean area of Kwangyang Bay located in the South Coastal region of Korea using remote sensing data based on Landsat Thematic Mapper (TM) multispectral digital data from 1988 and 1996. The coastal changes were detected using the digital histogram method and vector trace method. All the images were preprocessed, i.e. geometrically corrected, before the training set selection. when comparing the histograms of 7-band TM data, it was found that the band 5 image exhibited two critical Digital Number(DN) peaks, thereby indicating new coastal water and coastal land data. Based on this information, the coastal ocean area of the band 5 image was calculated using the vector tracing method supported by a CAD program. The result shows that the coastal ocean area decreased by about 5 % between 1988 to 1994. Accordingly, this gives a strong indication that the continuing land development will have a serious impact on the ecosystem of Kwangyang Bay.

• 한국전자통신학회논문지
• /
• 제4권1호
• /
• pp.46-52
• /
• 2009

위성-DMB 영상신호를 수신하는 헤리컬 안테나를 설계하였다. 위성-DMB용 헤리컬 안테나의 위상이 0, 90, 180, 270도 급전 되도록 4중실선(Quadrifilar) 형태로 설계함으로서 원형 편파의 특성을 나타내었으며 QHA 안테나의 상단 갭 간격, 턴 수 및 높이를 가변시켜 최적화시켰다. 최종 설계치는 갭 a=2.2mm, Helix 턴 수 b=0.9 턴 및 길이 c=42mm 이고 입력반사 계수는 주파수 2.62GHz에서 약 -5.8dB 정도이며, 상반평면 방사특성과 0.508dB의 축비특성을 나타내었다. 설계된 이중대역 QHA는 위성-DMB 수신 안테나에 적용되고 있다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권3호
• /
• pp.342-348
• /
• 2015

This paper presents a 1.9-GHz digital ${{\Delta}{\Sigma}}$ fractional-N PLL with a finite impulse response (FIR) filter embedded for noise suppression. The proposed digital implementation of FIR provides a simple method of increasing the number of taps without complicated calculation for gain matching. This work demonstrates 32 tap FIR filtering for the first time and successfully filtered the in-band phase noise generated from delta-sigma modulator (DSM). Design considerations are also addressed to find the optimum number of taps when the resolution of time-to-digital converter (TDC) is given. The PLL, fabricated in $0.11-{\mu}m$ CMOS, achieves a well-regulated in-band phase noise of less than -100 dBc/Hz for the entire range inside the bandwidth of 3 MHz. Compared with the conventional dual-modulus division, the proposed PLL shows an overall noise suppression of about 15dB both at in-band and out-of-band region.

• Journal of Information Science Theory and Practice
• /
• 제10권spc호
• /
• pp.12-24
• /
• 2022

This study attempted to investigate changes in collaboration structure for each stage of national Research and Development (R&D) in the artificial intelligence (AI) field through analysis of a co-author network for papers written under national R&D projects. For this, author information was extracted from national R&D outcomes in AI from 2014 to 2019. For such R&D outcomes, NTIS (National Science & Technology Information Service) information from the KISTI (Korea Institute of Science and Technology Information) was utilized. In research collaboration in AI, power function structure, in which research efforts are led by some influential researchers, is found. In other words, less than 30 percent is linked to the largest cluster, and a segmented network pattern in which small groups are primarily developed is observed. This means a large research group with high connectivity and a small group are connected with each other, and a sporadic link is found. However, the largest cluster grew larger and denser over time, which means that as research became more intensified, new researchers joined a mainstream network, expanding a scope of collaboration. Such research intensification has expanded the scale of a collaborative researcher group and increased the number of large studies. Instead of maintaining conventional collaborative relationships, in addition, the number of new researchers has risen, forming new relationships over time.

• 한국정보통신학회논문지
• /
• 제10권12호
• /
• pp.2303-2307
• /
• 2006

Wave Digital Filter(WDF)는 그 구조상 반올림 오차에 의한 잡음에 아주 강하기 때문에 필터로 구현되는 DSP 알고리듬에 있어 그 필터의 계수의 단어길이가 짧을 경우 아주 유용하게 이용될 수 있다. 본 논문에서는 멀티프로세서 구조를 채택하여 입력의 샘플링 속도, 프로세서의 수, 그리고 주어진 입력에 대한출력의 지연에 있어 최적인 WDF를 구현하고자 한다. 이 구현은 제어신호를 포함한 완전한 회로도로 주어지며, 이 화로도는 기존의 실리콘 컴 파일러를 이용하여 VLSI 레이아웃으로 용이하게 변환 될 수 있다.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
• /
• pp.44-48
• /
• 2002

This paper describes an adaptive signal processing of digital receiver with DDC(Digital Down Convertor), DDC is implemented by using NCO(Numerically Controlled Oscillator), digital low pass filter. for the passband sampling, we present the results of digital receiver simulation with DDC. We confirm that the low IP signal is converted to zero IF by DDC. DOA(Direction Of Arrival) estimation technique using MUSIC(Multiple SIgnal Classification) algorithm with high resolution is presented. We Cow that an accurate resolution of DOA depends on the input sampling number.

• Journal of information and communication convergence engineering
• /
• 제11권4호
• /
• pp.282-287
• /
• 2013

A real-time digital holographic display is the core technology for the next-generation 3DTV. Holographic display requires a considerably large amount of calculation. If generating a large number of digital holograms is intended, the amount of calculation and the time required increase exponentially. This is a significant obstacle in a real-time hologram service. This paper proposes an algorithm that increases the speed of generating a Fresnel hologram by using a recursive addition operation covering the entire coordinate array of a digital hologram. The 3D object designed to calculate the digital hologram uses a depth-map image produced by computer graphics. The proposed algorithm is a technique that performs the computer-generated holography (CGH) operation with only recursive addition of all of the hologram's coordinates by analyzing the regularity between the 3D object and the digital hologram coordinates. The experimental results show that the proposed algorithm increases the operation speed by 70% over the technique using the conventional CGH equation and by more than 30% over the previously proposed recursive technique.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.52-53
• /
• 2017

Through the case study, we surveyed an applicability of digital fabrication in irregular-shaped building construction project. By digital fabrication, we mean is a precision manufacturing method has been used in aircraft, ship and car manufacturing industry. We collected construction-completed "LotteWorld Tower Podium" project data and analyzed its process in terms of construction quality andduration. The result shows that digital fabrication is considered a competitive technology that enabled to complete the project in seven months within 3mm surface curvature threshold. The digitalfabrication is expected to apply on a number of irregular-shaped building construction project.

• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2000년도 하계종합학술대회논문집
• /
• pp.65-68
• /
• 2000

In this paper, as a compatible software radio transmission system, Digital-Radio conversion system which can directly change the digital signal generated by the logic circuit into radio signal is proposed. By the vector synthesis method, the digital signals can change directly into radio signal. If such a circuit is realized, RF circuit and an antenna can be composed by the simple one device, and the radio is directly controlled and performed by the software processing which is the essence of software radio. This Digital-Radio conversion system of this paper give many number of communication channels being offered by PN code and offer a hardware design flexibility by digitization, therefore it decrease the percentage ratio of hardware of system and give a more flexible function of software basis. In this paper, this proposed Digital-Radio conversion system is called D/R converter, and the principle of this D/R converter, radio signal generation algorithm is explained and the performance characteristics of proposed algorithm is shown in time base by the computer simulation method.

• 한국BIM학회 논문집
• /
• 제8권4호
• /
• pp.34-40
• /
• 2018

As the number of aged bridges increases, the development of efficient bridge maintenance techniques is becoming more important. Particularly, there have been many studies on digital-twin models of bridges for maintenance and SHM (Structure Health Monitering). However, in order to use the digital-twin model for maintenance of the bridge, the model updating process that matches the structural response between the real bridge and the digital-twin bridge model must be done. This study presents a model updating method that adjusts bridge's stiffness and boundary condition with genetic algorithm (GA) using static displacements and verified proposed updating method through field test on PSC girder bridge. This study also proposes a conceptual idea to construct an efficient bridge maintenance system by applying the updated numerical analysis model to the digital-twin model.