• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.2
• /
• pp.200-209
• /
• 2004

The fuzzy control based on $\alpha$-level fuzzy set decomposition. It is known to produce quick response and calculating time of fuzzy inference. This paper derived the embodiment computational algorithm for defuzzification by min-max fuzzy inference and the center of gravity method based on $\alpha$-level fuzzy set decomposition. It is easy to realize the fuzzy controller hardware. based on the calculation formula. In addition. this study proposed a circuit that generates PWM actual signals ranging from fuzzy inference to defuzzification. The fuzzy controller was implemented with mixed analog-digital logic circuit using the computational fuzzy inference algorithm by min-min-max and defuzzification by the center of gravity method. This study confirmed that the fuzzy controller worked satisfactorily when it was applied to the position control of a dc servo system.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.197-200
• /
• 2002

We newly developed the procedures of X-ray Cargo inspection system with acquisition of multi-channel data, analog to digital converter and post logic circuit which is controlled by the FPGA. The IEEE1149.1 standard defines a four-wire serial interface(a fifth wire is optional)to access complex integrated circuits(ICs) such as PLD. This paper describes that Boundary_Scan test method applied to our home made cargo inspection system.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.113-116
• /
• 1996

The drain current of the MOSFET in the off state(i.e., Id when Vgs=0V) is undesired but nevertheless important leakage current device parameter in many digital CMOS IC applications (including DRAMs, SRAMs, dynamic logic circuits, and portable systems). The standby power consumed by devices in the off state have added to the total power consumed by the IC, increasing heat dissipation problems in the chip. In this paper, hot-carrier-induced degra- dation and gate-induced-drain-leakage curr- ent under worse case in P-MOSFET\`s have been studied. First of all, the degradation of gate-induced- drain-leakage current due to electron/hole trapping and surface electric field in off state MOSFET\`s which has appeared as an additional constraint in scaling down p-MOSFET\`s. The GIDL current in p-MOSFET\`s was decreased by hot-electron stressing, because the trapped charge were decreased surface-electric-field. But the GIDL current in n-MOS77T\`s under worse case was increased.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.12
• /
• pp.2633-2640
• /
• 2009

We design a small-area, low-power, and high-speed EEPROM for touch screen controller IC. As a small-area EEPROM design, a SSTC (side-wall selective transistor) cell is proposed, and high-voltage switching circuits repeated in the EEPROM core circuit are optimized. A digital data-bus sensing amplifier circuit is proposed as a low-power technology. For high speed, the distributed data-bus scheme is applied, and the driving voltage for both the EEPROM cell and the high-voltage switching circuits uses VDDP (=3.3V) which is higher than the logic voltage, VDD (=1.8V), using a dual power supply. The layout size of the designed 128-KBit EEPROMIP is $662.31{\mu}m{\times}1314.89{\mu}m$.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.9
• /
• pp.1-10
• /
• 1998

This paper is to propose an algorithm named as DYSAC to find the critical path(the longest sensitizable path) in a large digital circuit, whose purpose is to reduce the time to find critical path and to find critical paths of the circuits for which the previous methods could not find one. Also a set of path sensitization criteria named as DYPSEC is proposed, which is used to select a path from input to the output inside the DYSAC. The DYSAC consists of two sub-algorithms; the level assignment algorithm to assign a level to each node and the critical path selection algorithm to select the sensitizable path. The proposed algorithm was implemented with C-language on SUN Sparc and applied to the ISCAS'85 benchmark circuits to make sure if it works correctly and finds the correct critical path. Also, the results from the experiments were compared to the results from the previous works. The comparison items were the ability to find the critical path and the speed, in both of which the proposed algorithm in this paper shows better results than others.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.10
• /
• pp.1275-1283
• /
• 1999

본 논문은 CMOS 디지털 회로에서의 전력 소모의 주원인인 신호의 천이중에서 회로의 동작에 직접적인 영향을 미치지 않는 불필요한 신호의 천이인 글리치를 줄이기 위한 효율적인 알고리즘을 제시한다. 제안된 알고리즘은 회로의 지연 증가 없이 게이트 사이징과 버퍼 삽입에 의해 경로 균등(path balancing)을 이룸으로써 글리치를 감소시킨다. 경로 균등화를 위하여 먼저 게이트 사이징을 통해 글리치의 감소와 동시에, 게이트 크기의 최적화를 통해 회로 전체의 캐패시턴스까지 줄일 수 있으며, 게이트 사이징 만으로 경로 균등화가 이루어지지 않을 경우 버퍼 삽입으로 경로 균등화를 이루게 된다. 버퍼 자체에 의한 전력 소모 증가보다 글리치 감소에 의한 전력 감소가 큰 버퍼를 선택하여 삽입한다. 이때 버퍼 삽입에 의한 전력 감소는 다른 버퍼의 삽입 상태에 따라 크게 달라질 수 있어 ILP (Integer Linear Program)를 이용하여 적은 버퍼 삽입으로 전력 감소를 최대화 할 수 있는 저전력 설계 시스템을 구현하였다. 제안된 알고리즘은 LGSynth91 벤치마크 회로에 대한 테스트 결과 회로의 지연 증가 없이 평균적으로 30.4%의 전력 감소를 얻을 수 있었다.Abstract This paper presents an efficient algorithm for reducing glitches caused by spurious transitions in CMOS logic circuits. The proposed algorithm reduces glitches by achieving path balancing through gate sizing and buffer insertion. The gate sizing technique reduces not only glitches but also effective capacitance in the circuit. In the proposed algorithm, the buffers are inserted between the gates where power reduction achieved by glitch reduction is larger than the additional power consumed by the inserted buffers. To determine the location of buffer insertion, ILP (Integer Linear Program) has been employed in the proposed system. The proposed algorithm has been tested on LGSynth91 benchmark circuits. Experimental results show an average of 30.4% power reduction.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.1
• /
• pp.1-6
• /
• 2014

In this paper, we propose a CPLD low power algorithm considering the structure. The proposed algorithm is implemented CPLD circuit FC(Feasible Cluster) for generating a problem occurs when the node being split to overcome the area and power consumption can reduce the algorithm. CPLD to configure and limitations of the LE is that the number of OR-terms. FC consists of an OR node is divided into mainly as a way to reduce the power consumption with the highest number of output nodes is divided into a top priority. The highest number of output nodes with the highest number of switching nodes become a cut-point. Division of the node is the number of OR-terms of the number of OR-terms LE is greater than adding the input and output of the inverter converts the AND. Reduce the level, power consumption and area. The proposed algorithm to MCNC logic circuits by applying a synthetic benchmark experimental results of 13% compared to the number of logical blocks decreased. 8% of the power consumption results in a reduced efficiency of the algorithm represented been demonstrated.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.2
• /
• pp.112-118
• /
• 2015

Conventional synchronous circuits cannot keep the circuit performance, and cannot even guarantee correct operations under the influence of PVT variations and aging effects in the nanometer regime. Therefore, in this paper, a DI (delay insensitive) design based NCL (Null Convention Logic) design methodology with a very simple design structure has been used to design digital systems, which is one of well-known asynchronous design methods robust to various variations and does not require any timing analysis. Because circuit-level structures of conventional NCL gates have weakness of low speed, high area overhead or high wire complexity, this paper proposes a new lNCL gates designed at the transistor level for high-speed, low area overhead, and low wire complexity. The proposed NCL gate libraries have been compared to the conventional NCL gates in terms of circuit delay, area and power consumption using a asynchronous multiplier implemented in dongbu 0.11um CMOS technology.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.1
• /
• pp.47-56
• /
• 1999

As the density of logic gates of VLSI chips has rapidly increased, more number of I/O pins has been required. This results in bigger package size and higher packager cost. The package cost is higher than the cost of bare chips for high I/O count VLSI chips. As the density of logic gates increases, the reduction method of the number of I/O pins for a given complexity of logic gates is required. In this paper, we propose the novel I/O interface circuit using CTR (Constant-Transition-Rate) code to reduce 50% of the number of I/O pins. The rising and falling edges of the symbol pulse of CTR codes contain 2-bit digital data, respectively. Since each symbol of the proposed CTR codes contains 4-bit digital data, the symbol rate can be reduced by the factor of 2 compared with the conventional I/O interface circuit. Also, the simultaneous switching noise(SSN) can be reduced because the transition rate is constant and the transition point of the symbols is widely distributed. The channel encoder is implemented only logic circuits and the circuit of the channel decoder is designed using the over-sampling method. The proper operation of the designed I/O interface circuit was verified using. HSPICE simulation with 0.6 m CMOS SPICE parameters. The simulation results indicate that the data transmission rate of the proposed circuit using 0.6 m CMOS technology is more than 200 Mbps/pin. We implemented the proposed circuit using Altera's FPGA and confimed the operation with the data transfer rate of 22.5 Mbps/pin.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.7 no.3
• /
• pp.27-33
• /
• 1993

This paper presents the &tal controller for driving high frequency voltage fed PWM inverter that carrier frequency is over 2OkHz.We analyzed the conventional PWM to select a proper PWM pattern. as the result, obtained PWM pattern of the controller in which asynchronus staircase sinusoidal waveform is used as reference signal, and variable carrier ratio method was used for PWM control. The PWM controller is designed by fully digital method. Especially, Thk proposed controller is consisted of 8 bit one-chip microprocessor and digital logic. the former is for arithmetic and data processing, and the latter is for PWM pattern synthesis. Therefore, The responsibility and controllability is improved. Also, Data processing capability is improved using proper program to output modulation index with 9 bits. Circuits configuration of digital controller are made up of one chip 8051 and EPLD, and its controllability is tested by operating voltage fed inverter. Harmonics and current waveform is evaluated and analyzed for the voltage fed inverter system.