• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.2
• /
• pp.15-21
• /
• 2008

This paper discuss the sequential digital logic systems and arithmetic operation algorithms which is the important material in computer architecture using analysis and synthesis which is based on extension logic for binary logic over galois fields. In sequential digital logic systems, we construct the moore model without feedback sequential logic systems after we obtain the next state function and output function using building block T-gate. Also, we obtain each algorithms of the addition, subtraction, multiplication, division based on the finite fields mathematical properties. Especially, in case of P=2 over GF($P^m$), the proposed algorithm have a advantage which will be able to apply traditional binary logic directly.The proposed method can construct more efficiency digital logic systems because it can be extended traditional binary logic to extension logic.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1066-1070
• /
• 2003

Recently technologies have created new principle and theory but the PID control system remains its popularity as the PID controller contains simple structure, including maintenance and parameter adjustment being so simple. Thus, this paper proposes auto tune PID by fuzzy logic controller based on FPGA which to achieve real time and small size circuit board. The digital PID controller design to consist of analog to digital converter which use chip TDA8763AM/3 (10 bit high-speed low power ADC), digital to analog converter which use two chip DAC08 (8 bit digital to analog converters) and fuzzy logic tune digital PID processor embedded on chip FPGA XC2S50-5tq-144. The digital PID processor was designed by fundamental PID equation which architectures including multiplier, adder, subtracter and some other logic gate. The fuzzy logic tune digital PID was designed by look up table (LUT) method which data storage into ROM refer from trial and error process. The digital PID processor verified behavior by the application program ModelSimXE. The result of simulation when input is units step and vary controller gain ($K_p$, $K_i$ and $K_d$) are similarity with theory of PID and maximum execution time is 150 ns/action at frequency are 30 MHz. The fuzzy logic tune digital PID controller based on FPGA was verified by control model of level control system which can control level into model are correctly and rapidly. Finally, this design use small size circuit board and very faster than computer and microcontroller.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.721-724
• /
• 2006

This paper presents a method of the constructing the digital logic switching functions and realizing the circuit design using partition techniques. First of all, we introduce the necessity, background and concepts of the partition design techniques for the digital logic systems. Next, we discuss the definitions that are used in this paper. For the purpose of the circuit design for the digital logic switching functions, we discuss the extraction of the partition functions. Also we describe the construction method of the building block, that is called the building block, based on each partition functions. And we apply the proposed method to the example, and we compare the results with the results of the earlier methods. In result, we describe the control functions, it means that we obtain the effective cost in the digital logic design for any other earlier methods.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.1
• /
• pp.59-64
• /
• 2008

In this paper, we developed an virtual lecture to study digital logic circuits. The contents is intended fer the students without or with little knowledge about electrics or electronics. For the beginners, the lecture contains the basic electronics and basic circuit theory as well as the degital logic circuits to be more practical lecture. And we developed the virtual circuit lab which uses real-like devices, circuits and interactive objects for the students to experience practical digital circuits. With the features described above, this contents would be useful for the beginners who want to studying digital logic circuits.

• Progress in Superconductivity
• /
• v.9 no.2
• /
• pp.157-161
• /
• 2008

Due to high speed operations and ultra low power consumptions RSFQ logic circuit is a very good candidate for future electronic device. The focus of the RSFQ circuit development has been on the advancement of analog-to-digital converters and microprocessors. Recent works on RSFQ ALU development showed the successful operation of an 1-bit block of ALU at 40 GHz. Recently, the study of an RSFQ analog-to-digital converter has been extended to the development of a single chip RF digital receiver. Compared to the voltage logic circuits, RSFQ circuits operate based on the pulse logic. This naturally leads the circuit structure of RSFQ circuit to be pipelined. Delay time on each pipelined stage determines the ultimate operating speed of the circuit. In simulations, a two junction Josephson transmission line's delay time was about 10 ps, a splitter's 14.5 ps, a switch's 13 ps, a half adder's 67 ps. Optimization of the 4-bit ALU circuit has been made with delay time consideration to operate comfortably at 10 GHz or above.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.6
• /
• pp.230-238
• /
• 1996

In this paper, digital corrction and calibration circuit for a high-resolution CMOS pipelined A/D converter are proposed. The circuits were actually applied to a 12 -bit 4-stage pipelined A/D converter which was implemented in a 0.8${\mu}$m p-well CMOS process. The proposed digital correction logic is based on optimum multiplexer and two nonoverlapping clock phases resulting in a small die area snd a modular pipelined architecture. The propsoed digital calibration logic which consists of calibration control logic, error averaging logic, and memory can effectively perform self-calibration with little modifying analog functional bolcks of a conventional pipelined A/D conveter.

• Journal of Digital Contents Society
• /
• v.18 no.5
• /
• pp.881-888
• /
• 2017

Logic design using multiplexer has been used as a useful method for design convenience and flexibility in structural digital system design. In this paper, we analyze the effect of don't care conditions on logic optimization in a multiplexer-based logic design, which was not discussed enough in the previous studies in multiplexer based logic design, and describe the use of don't care conditions for designing of a single multiplexer and multiple multiplexer-based logic design. Especially, the design method when the number of data input is not 2m (as the number of selection lines is m) is considered. We also describe how to apply the proposed technique to the digital logic design education in conjunction with microprocessor design using Arduino which is widely used in creative engineering education recently.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.6
• /
• pp.1288-1293
• /
• 2005

This paper presents a design method for multiple-output combinational digital logic systems using time domain based on multiplexing(TDBM) and common multi-terminal extension decision diagrams(CMTEDD). The CMIEDDs represents extension valued multiple-output functions, while TDBM systems transmit several signals on a single lines. The proposed method can reduce the 1)hardware, 2)logic levels and 3)pins. In the logic system design, we use two types of decision diagrams(DDs), that is the common binary decision diagrams(CBDDs) and CMTEDDs. Also, we propose an algorithms to derive common multiple-terminal binary decision diagrams(CMTBDD) from CBDDs, and CMTEDDs from CMTBDDs. The CMTEDDs over CBDDs is more compactness in terms of number of non-terminal nodes, where the nodes for output selection variables are not included in the non-terminal nodes. In the logic design, each non-terminal nodes of an CBDDs and an CMTEDDs is realized by a multiplexer(MUX). In addition, we compare the proposed TDBM realization with the conventional one.

• Progress in Superconductivity and Cryogenics
• /
• v.8 no.1
• /
• pp.26-28
• /
• 2006

The development technique of digital logic using CMOS device is close reached several limitations These make technical needs that are ultra high speed superconductive systems based on CMOS silicon digital computing technique. Comparing digital logic based on silicon CMOS, the computing technique based on ultra high speed superconductive systems has many advantages which are ultra low power consumption, ultra high operation speed. etc. It is estimated that features like these increasingly improve the possibility of ultra low power and ultra superconductive systems. In this paper digital logics of current CMOS technique and RSFQ superconductive technique are compared with and analyzed.

• Journal of Engineering Education Research
• /
• v.6 no.1
• /
• pp.5-14
• /
• 2003

This paper presents a simplified web-based simulator for digital logic circuits with which several important principles related to digital logic circuits can be understood and confirmed. The proposed simulator is implemented to have several simplified functions which are essential to the learning process of digital logic circuits. The learners by themselves simulate several digital logic circuits on the web under specific input conditions and the design/analysis of digital logic circuits can be available. The proposed simulator, combined with multimedia contents, can be used as an auxiliary educational tool and enhance the improved learning efficiency. The results of this paper can be widely used to improve the efficiency of web-based educations in the cyber space. Several simulation results are illustrated as examples to show the validity of the proposed web-based simulator.