• Journal of IKEEE
• /
• v.3 no.2 s.5
• /
• pp.186-195
• /
• 1999

In this paper, the RF-modules composed of front-end, frequency synthesizer, modulator/demodulator and power control multi channel WLL personal system for W-CDMA using 10 [MHz] RF channel bandwidth has been implemented and considered. The measured transmission power is 250 [mW] which is very close to the required value. The measured flatness of power at the final output stage is ${\pm}1.5[dB]$ over the required bandwidth of the receiver. In addition, it is found that the chip rate transmitting spread signal is set to 8.192 [MHz], the required rate. The frequencies of RF_LO signal and LO signal of the modulator and the demodulator measured by a frequency synthesizer are satisfied with design requirements. The operating range of the receiving strength signal indicator and AGC units shows 60 [dB] respectively. Also the measured phasor diagram and eye pattern for deciding the RF modules compatible with baseband digital signal processing part are shown good results.

• Journal of KIISE:Computing Practices and Letters
• /
• v.11 no.1
• /
• pp.26-35
• /
• 2005

Generally, we employ FSMs for the design of controllers in digital systems. FSMs are Implemented with state diagrams generated from control flow. With HDL, we design and verify FSMs based on state diagrams. As the number of states in the system increases, the verification or modification processes become complicated, error prone and time consuming. In this paper, we propose a control flow oriented hardware description language at the register transfer level called Cycle-C. Cycle-C describes FSMs with timing information and control How intensive algorithms. The Cycle-C description is automatically converted into FSMs in the form of synthesizable RTL VHDL. In experiments, we design FSMs for control intensive interface circuits. There is little area difference between Cycle-C design and manual design. In addition, Cycle-C design needs only 10~50% of the number lines of manual RTL VHDL designs.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.61.1-61.1
• /
• 2011

We have performed simultaneous observations at 22GHz and 43GHz on AGNs hosted by elliptical galaxies using KVN radio telescope. We have constructed the sample, based on two major surveys in radio and optical band, i.e. Faint Images of the Radio Sky at Twenty-Centimeters (FIRST) and Sloan Digital Sky Survey (SDSS) DR7, respectively. We restricted the redshift range 0.01 < z < 0.06 and the absolute magnitude Mr < -19.4 in order to satisfy volume limited sample. We also checked clear detection of four distinctive emission lines ([NII], [OIII], $H{\alpha}$, $H{\beta}$) so as to utilize on BPT diagram, distinguishing AGNs from star-forming galaxies. Elliptical galaxies have been selected by visual inspection making use of SDSS optical images. Then, we cross-matched the elliptical galaxies with FIRST detections. About 35% of the galaxies have been detected throughout KVN observations. We derive spectral index, applying the flux of different radio frequencies from FIRST (1.4GHz) and KVN (22GHz) and classify into steep, flat or inverted spectrum. We have found that most of the detected galaxies have flat spectrum while the rest of them have steep spectrum. This implies that a number of detected galaxies might have compact structure associated with the central region of the galaxies. The relation between black hole mass and radio luminosity has shown relatively tighter correlation in high frequency than in low frequency, which confirms that high frequency in radio band is appropriate to study the center of the galaxies.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.35.1-35.1
• /
• 2016

Nearby galaxy clusters and their surrounding regions represent the current endpoint of evolution galaxy cluster evolution. We present a new catalog of 1589 galaxies, what we call Extended Virgo Cluster Catalog (EVCC), in wider area of the Virgo cluster based on the Sloan Digital Sky Survey (SDSS) Data Release 7. The EVCC covers an area 5.2 times larger than the footprint of the classical Virgo Cluster Catalog, and reaches out to 3.5 times the virial radius of the Virgo cluster. The EVCC contains fundamental information such as membership, morphology, and photometric parameters of galaxies. The EVCC defines a comprehensive galaxy sample covering a wider range in galaxy density that is significantly different from the inner region of the Virgo cluster. It will be the foundation for forthcoming galaxy evolution studies in the extended Virgo cluster region, complementing ongoing and planned Virgo cluster surveys at various wavelengths. We also present the large scale structures in the field around the Virgo cluster. We identified seven galaxy filaments and one possible sheet in three dimensions of super-galactic coordinates based on the HyperLEDA database. By examining spatial distribution and Hubble diagram of galaxies, we found that six filaments are directly associated with the main body of the Virgo cluster. On the other hand, one filament and one sheet are structures located at background of the main body of Virgo cluster. The EVCC and the filament structures will be the foundation for forthcoming studies of galaxy evolution in various environments as well as buildup of the galaxy cluster at z ~ 0, complementing ongoing and planned Virgo cluster surveys at various wavelengths.

• Journal of IKEEE
• /
• v.18 no.2
• /
• pp.263-271
• /
• 2014

This paper presents design of the second-order sigma-delta modulator for converting voltage and temperature signals to digital ones in Battery Management IC (BMIC) for mobile applications. The second-order single-loop switched-capacitor sigma-delta modulator with 1-bit quantization in 0.13-um CMOS technology is proposed. The proposed modulator is designed using switched-opamp technique for saving power consumption. With an oversampling ratio of 256 and clock frequency of 256kHz, the modulator achieves a measured 83-dB dynamic range and a peak signal-to-(noise+distortion) ratio (SNDR) of 81.7dB. Power dissipation is about 0.66 mW at 3.3 V power supply and the occupied core area is $0.425mm^2$.

• Journal of Power Electronics
• /
• v.15 no.1
• /
• pp.190-201
• /
• 2015

This paper uses the switching function approach to present a simple state model of the Vienna-type rectifier. The approach introduces the relationship between the DC-link neutral point voltage and the AC side phase currents. A novel direct power control (DPC) strategy, which is based on the sliding mode control (SMC) for Vienna I rectifiers, is developed using the proposed power model in the stationary ${\alpha}-{\beta}$ reference frames. The SMC-based DPC methodology directly regulates instantaneous active and reactive powers without transforming to a synchronous rotating coordinate reference frame or a tracking phase angle of grid voltage. Moreover, the required rectifier control voltages are directly calculated by utilizing the non-linear SMC scheme. Theoretically, active and reactive power flows are controlled without ripple or cross coupling. Furthermore, the fixed-switching frequency is obtained by employing the simplified space vector modulation (SVM). SVM solves the complicated designing problem of the AC harmonic filter. The simplified SVM is based on the simplification of the space vector diagram of a three-level converter into that of a two-level converter. The dwelling time calculation and switching sequence selection are easily implemented like those in the conventional two-level rectifier. Replacing the current control loops with power control loops simplifies the system design and enhances the transient performance. The simulation models in MATLAB/Simulink and the digital signal processor-controlled 1.5 kW Vienna-type rectifier are used to verify the fast responses and robustness of the proposed control scheme.

• Journal of Advanced Navigation Technology
• /
• v.17 no.6
• /
• pp.693-699
• /
• 2013

In this paper, ${\pi}/4$-DQPSK modem according to ITU-R M.1842-1 recommendation Annex1 is investigated and simulated. At first, standardization and technical trend of VHF maritime mobile communication are introduced. The ${\pi}/4$-DQPSK modem defined in the Annex1 should support 28.8Kbps bit transmission rate within 25KHz frequency bandwidth. We describe the system model and simulation process of ${\pi}/4$-DQPSK modem transmitter and receiver design with RRC(Root Raised Cosine) transmitter and receiver filter. Then we suggest various graphical simulation results(time domain signals, constellation, power spectral density according to roll-off factor, eye diagram), and show simulated BER performance of the modem. From the simulation results, it is shown that roll-off factor of RRC filter affects to BER performance according to SNR and the designed simulation model meets the spectrum mask requirement suggested in ITU-R M.1842-1 recommendation.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.11
• /
• pp.59-66
• /
• 2021

This study is to verify the effectiveness of initial planning verification using paper prototyping while methodologies are being developed to verify the direction of game planning in a short time at low cost since it is having a hard time to verify the direction and fun of the game by taking a lot of capital and time in the initial planning process as the game development becomes larger. It conducted paper prototyping production for about 40 students who are learning game planning for a semester, and trained them on how to motivate using core mechanical diagrams, scrums, and basic psychological needs that can effectively materialize the ideas of their early game planning. Through this curriculum, board games were completed with eleven paper prototyping, and it was confirmed that students who participated in the class were meaningful in verifying fun and securing gameability through cross-play.

• Journal of Industrial Convergence
• /
• v.22 no.5
• /
• pp.39-48
• /
• 2024

Due to COVID-19, much research has been conducted on learning loss and educational gaps due to the postponement of the start of school and prolonged online distance learning, and most of the research has focused on the phenomenon of educational gaps. If a pandemic situation like this occurs in the future, fundamental policies are needed to resolve the educational gap. A fundamental solution requires not only an understanding of the educational gap phenomenon, but also the structure behind the phenomenon. Therefore, from a structuralist perspective, this study sought to model the educational gap caused by COVID-19 as a prototype of systems thinking and identify its structure. In addition, we looked at the unintended consequences resulting from policies aimed at resolving existing educational gaps. In order to respond to similar disaster situations in the future, policies for resolving the digital gap, support for basic academic skills, quality improvement for distance learning, and self-directed learning were discussed based on the structure of this study.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.12 no.1
• /
• pp.53-62
• /
• 2018

In this study, we developed a smart 1RM system for national health management and physical fitness, which enables quantitative 1RM measurement in various types of exercise using digital pulley technology, and to test the effect on training by using it. We developed the smart 1RM system, which is composed of portable muscle strength measuring device, Bluetooth communication based mobile phone data transmission and circuit diagram, and height adjustable system body. We recruited the 30 participants with 20th aged and divided into training and non-performing groups with 15 participants randomly. The participants performed 5 sets of elbow, lumbar, knee extension / flexion 10 times using smart 1RM system and the experimental period was 3 days a week for a total of 8 weeks. The experimental results showed that the maximum strength of the elbow, lumbar, and knee joints was significantly improved before and after maximal muscle strength training in the training group. Oxygen intakes during 1RM exercise mode showed 10.91% than endurance. To verify the validity of the smart 1RM maximal strength data, the reliability was 0.895 (* p <0.00). This study can be applied to the early rehabilitation treatment of the elderly and rehabilitation patients more quantitatively using the national health care.