• 한국정밀공학회지
• /
• 제13권5호
• /
• pp.131-138
• /
• 1996

This paper suggests a servo control algorithm to reduce the repeatable tracking error which is not explicitly taken into account in the design of a conventional PID controller of a computer hard disk drive. The robust stability of the repetitive control system with multiplicative modelling error is analyzed, and the controller was implemented using a fixed point DSP(Digital Signal Processor). Experimental results show that the repetitive errors are suppressed effectively by the proposed controller.

• 한국지능시스템학회논문지
• /
• 제13권4호
• /
• pp.397-402
• /
• 2003

본 논문은 디지털 재설계 기법을 이용한 펄스폭변조(PWM： pulse-width-modulation) 제어기 설계 기법을 제안한다. 디지털 재설계 기법은 잘 설계된 아날로그 제어기를 상태 정합(state-matching) 이라는 측면에서 그 제어 성능을 보장하도록 일반적인 펄스크기변조(PAM: pulse-amplitude-modulation) 디지털 제어기로 변환하는 기법이다 유사한 개념으로 재설계된 PAM 디지털 제어기는 등가 영역의 원리(equivalent area principle)를 사용하여 PWM 제어기로 변환된다. 제안된 PWM 제어기법의 효용성을 검증하기 위하여 인공위성의 자세제어 시스템의 모의실험의 예를 보인다.

• 한국인터넷방송통신학회논문지
• /
• 제19권1호
• /
• pp.225-229
• /
• 2019

자기베어링은 기계적인 마찰이 없고 안정적인 동역학 특성을 갖기 때문에 진공 및 청정 환경이나 고정도가 요구되는 분야에서 많이 활용되고 있다. 그러나 자기베어링은 다양한 장점에도 불구하고 일반적으로 제어기가 복잡해서 적용 범위의 확산이 제한적이다. 본 논문에서는 복잡도가 낮은 디지털 방식의 자기베어링 제어기를 제안하였다. 또한 디지털 제어기 성능열화의 주된 원인인 아날로그 신호를 디지털 신호로 변환하는 과정에서 발생하는 오류와 제어 알고리즘 구현상의 문제점들을 분석하고 해결하였다. 제안한 제어기를 실제 자기베어링에 적용한 실험을 통해 제어기가 자기부상 목표 정밀도를 갖는 것을 확인하였다.

• 전기의세계
• /
• 제29권3호
• /
• pp.179-184
• /
• 1980

This paper presents in some detail a discussion of the design of the digital control system without nonlinear elements to exhibit deadbeat performance in response to step inputs. The transfer function of digital dontroller is obtained by calculating the sequence of inputs and outputs of the digital controller for deadbeat performance. Digital controllers are designed for unity feedback multivariable systems by this method, which is well adapted for obtaining a solution by a digital computer.

• 한국정밀공학회지
• /
• 제10권4호
• /
• pp.7-15
• /
• 1993

This paper introduces a new concept to analyze the digital control system where the continuous-time plant is stabilized by the digital controller with sampler and hodl. It gives some methods to handle the inter-sampling behavior which has not been considered in the digital controller design. Also, the new trend and future direction in digital control are introduced.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 V
• /
• pp.2593-2596
• /
• 2003

The deadbeat properties have been well known in designing digital control systems. But recently several researchers proposed a CDBC(Continuout-time DeadBeat Controller) in continuous time. They used delay or smoothing elements from the finite Laplace Transform. A delay element is made by the exponential terms. A smoothing element is used to smooth the digital control input. And eventually the process is argumentd with smoothing elements and then well-known digital deadbeat controller is designed Sometimes samplings are done in continuous time systems and some hold devices are used to relate to digital systems. So multirate sampling may enhance the efficiency of the CDBC. A DC servo motor is chosen for implementing CDBC algorithm. Especially Outputs according to the variable input and disturbance are simulated. by use of Matlab Simulink.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2000년도 추계학술대회 학술발표 논문집
• /
• pp.176-179
• /
• 2000

This paper addresses a fuzzy controller for nonlinear systems control using a pole placement in a specified disk and fuzzy controller is redesign for Intelligent digital redesign method. for nonlinear system, we obtain continuous time state feedback gain that guarantee stability of globally TS fuzzy system. The feedback gain is satified pole placement in a specified disk region so that the closed loop system is stable, For digital control redesgin of continuous time TS fuzzy model, we does state matching and obtain feedback gain of digital controller. Finally, it is shown that the proposed method is feasible through a computer simulation.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 추계학술대회 논문집
• /
• pp.41-45
• /
• 2001

This paper presents an implementation of motion control system of Switched Reluctance Motor (SRM) using digital hysteresis controller by TMS320F240 DSP. SRM position control system possess several advantages over other motors, including high efficiency, simple structure, low cost, and four-quadrant operation at a wide speed range, especially for the servo drive systems with precision, stability and fast response characteristics in the industrial applications. In the suggested motion control system, position control using digital hysteresis controller is developed, and is evaluated using experimental testing. The developed system for cost reduction and high-performance by fully digital controller is shown a good response characteristic of motion control results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.630-632
• /
• 1999

In this paper, we develop intelligent digitally redesigned PAM and PWM fuzzy controllers for nonlinear systems. Takagi-Sugeno fuzzy model is used to model the nonlinear systems and a continuous-time fuzzy-model-based controller is designed based on the extended parallel-distributed-compensation method. The digital controllers are determined from existing analogue controllers. The proposed method provides an accurate and effective method for digital control of continuous·time nonlinear systems and enables us to efficiently implement a digital controller via pre-determined continuous-time TS fuzzy-model-based controller. We have applied the proposed method to the balancing problem of the inverted pendulum to show the effectiveness and feasibility of the method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.360-360
• /
• 2000

In this paper, a new criterion f9r determining the sampling rate of digital conroller is proposed. This paper will introduce a method fur determining the appropriate sampling rate of digital controller which can be substituted with the given analog controller, using phase margin and gain cross over frequency, not rising time or bandwidth of the closed-loop system. This method also guarantees performance of the system. Without exact modeling functions of the plant, abstracting those functions, this paper can achieve stability and aimed performance of the system, and this paper proved it with proper modeling functions.