• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.7 no.2
• /
• pp.184-195
• /
• 1995

A theoretical one-dimensional model for the charging process in stratified thermal storage tanks is established presuming that the fluid ensuing from the tank inlet creates a perfectly mixed, layer above the thermocline. Both the generic and asymptotic closed-form solutions are obtained via the Laplace transformation. The asymptotic solution describes the nature of the charging pertaining to the case of no thermal diffusion, whereas the generic solution is of practical importance to understand the role of operating parameters on the stratification. The present model is validated through comparison with available experimental data, where they agree well with each other within a reasonable limit. An interpretation of the exact solution entails two important features associated with the charging process. The first is that an in-crease in the mixing depth $h_m$ causes a relatively slow temperature rise in the perfectly mixed region, but on the other hand it results in a faster decay of the overall temperature gradient across the thermocline. Next is the predominance of the mixing depth in the presence of the prefectly mixed region. In such a case the effect of the Peclet number is marginal and there-fore the thermal characteristics are solely dependent on the mixing depth paticularly for large $h_m$. The Peclet number affects significantly only for the case without mixing. Variation of the storage efficiency in response to the change in the mass flow rate agrees favorably with the published experimental results, which confirms the utility of the present study.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.215-216
• /
• 2013

The silicide is a compound of Si with an electropositive component. Silicides are commonly used in silicon-based microelectronics to reduce resistivity of gate and local interconnect metallization. The popular silicide candidates, CoSi2 and TiSi2, have some limitations. TiSi2 showed line width dependent sheet resistance and has difficulty in transformation of the C49 phase to the low resistive C54. CoSi2 consumes more Si than TiSi2. Nickel silicide is a promising material to substitute for those silicide materials providing several advantages; low resistivity, lower Si consumption and lower formation temperature. Nickel silicide (NiSi) nanowire (NW) has features of a geometrically tiny size in terms of diameter and significantly long directional length, with an excellent electrical conductivity. According to these advantages, NiSi NWs have been applied to various nanoscale applications, such as interconnects [1,2], field emitters [3], and functional microscopy tips [4]. Beside its tiny geometric feature, NW can provide a large surface area at a fixed volume. This makes the material viable for photovoltaic architecture, allowing it to be used to enhance the light-active region [5]. Additionally, a recent report has suggested that an effective antireflection coating-layer can be made with by NiSi NW arrays [6]. A unique growth mechanism of nickel silicide (NiSi) nanowires (NWs) was thermodynamically investigated. The reaction between Ni and Si primarily determines NiSi phases according to the deposition condition. Optimum growth conditions were found at $375^{\circ}C$ leading long and high-density NiSi NWs. The ignition of NiSi NWs is determined by the grain size due to the nucleation limited silicide reaction. A successive Ni diffusion through a silicide layer was traced from a NW grown sample. Otherwise Ni-rich or Si-rich phase induces a film type growth. This work demonstrates specific existence of NiSi NW growth [7].

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.15 no.3
• /
• pp.190-195
• /
• 2003

For many coastal problems, such as wave transformation, tidal circulation, sediment transports and diffusion phenomena, we resort to numerical techniques. The representative numerical techniques are the method of finite differences and finite elements. The approximate algebraic equations, referred to as finite difference equations(FDEs), are subsequently solved at discrete grid points within the domain of interests. Therefore, a set of grid points within the domain, as well as the boundaries of the domain, must be specified. The generation of grids for FDEs, with uniform spacing, is very simple compared to that of finite elements. However, within a very complex domain, there are few grid generation tools we can use conveniently. Unfortunately, most of the commercial grid generation programs are developed only for finite element method. In this paper, grid generation method using digitizer, with uniform rectangular spacing, are introduced in detail. Didger and Surfer programs by Golden Software are necessary to produce comparatively accurate and simple depth data.

• Journal of Ginseng Research
• /
• v.37 no.1
• /
• pp.108-116
• /
• 2013

For the improvement of ginsenoside bioavailability, the ginsenosides of fermented red ginseng by Phellinus linteus (FRG) were examined with respect to bioavailability and physiological activity. The polyphenol content of FRG ($19.14{\pm}0.50$ mg/g) was significantly higher (p<0.05) compared with that of non-fermented red ginseng (NFRG, $11.31{\pm}1.15$ mg/g). The antioxidant activities in FRG, such as 2,2'-diphenyl-1-picrylhydrazyl, 2,2-azino-bis-3-ethylbenzothiazoline-6-sulphonic acid, and ferric reducing antioxidant power, were significantly higher (p<0.05) than those in NFRG. The HPLC analysis results showed that the FRG had a high level of ginsenoside metabolites. The total ginsenoside contents in NFRG and FRG were $41.65{\pm}1.53$ mg/g and $50.12{\pm}1.43$ mg/g, respectively. However, FRG had a significantly higher content ($33.90{\pm}0.97$ mg/g) of ginsenoside metabolites (Rg3, Rg5, Rk1, compound K, Rh1, F2, and Rg2) compared with NFRG ($14.75{\pm}0.46$ mg/g). The skin permeability of FRG was higher than that of NFRG using Franz diffusion cell models. In particular, after 3 h, the skin permeability of FRG was significantly higher (p<0.05) than that of NFRG. Using a rat everted intestinal sac model, FRG showed a high transport level compared with NFRG after 1 h. FRG had dramatically improved bioavailability compared with NFRG as indicated by skin permeation and intestinal permeability. The significantly greater bioavailability of FRG may have been due to the transformation of its ginsenosides by fermentation to more easily absorbable forms (ginsenoside metabolites).

• The Research Journal of the Costume Culture
• /
• v.28 no.1
• /
• pp.30-44
• /
• 2020

Bootleg fashion emerged from the fashion industry after 2010, and has been used across a range of different genres. However, it has yet to be theoretically established; therefore, this study will explain bootleg fashion as a new genre, which will help in the planning and designing of products within domestic fashion brands. The purpose of this study was to examine the characteristics and internal meaning of bootleg fashion as a recently emerged fashion phenomenon that borrows from other brands without permission. The research methodology included a theoretical literature review of fashion sites and related materials and empirical research using case analysis. Results of the analysis of both characteristics and internal meaning of bootleg fashion suggest the following characteristics: "unauthorized use of symbolic elements," "disorganization of boundaries between fashion," "multiplicity through globalization," and "newness through deconstruction and recombination." Internal meanings derived from the analysis were "parody through symbol," which is seen as "a parody and homage resulting from the unauthorized use of a brand," while "decomposition through disorganization" is seen as a break-up of the boundaries between different fashions from a mainstream-oriented perspective. A juxtaposition of elements was demonstrated by "playfulness through transformation," which showed that such fashion cannot coexist with positional transposition. Finally, "spread as a cultural phenomenon" was derived through the diffusion through digital media with DIY culture. As such, bootleg fashion has been reborn as an innovative fashion genre, breaking the taboo of the illegitimate from the past and demonstrating new endeavors.

• Preventive Nutrition and Food Science
• /
• v.14 no.3
• /
• pp.201-207
• /
• 2009

In an effort to improve ginsenoside bioavailability, the ginsenosides of fermented red ginseng were examined with respect to bioavailability and physiological activity. The results showed that the fermented red ginseng (FRG) had a high level of ginsenoside metabolites. The total ginsenoside contents in non-fermented red ginseng (NFRG) and FRG were 35715.2 ${\mu}g$/mL and 34822.9 ${\mu}g$/mL, respectively. However, RFG had a higher content (14914.3 ${\mu}g$/mL) of ginsenoside metabolites (Rg3, Rg5, Rk1, CK, Rh1, F2, and Rg2) compared to NFRG (5697.9 ${\mu}g$/mL). The skin permeability of RFG was higher than that of NFRG using Franz diffusion cells. Particularly, after 5 hr, the skin permeability of RFG was significantly (p<0.05) higher than that of NFRG. Using everted instestinal sacs of rats, RFG showed a high transport level (10.3 mg of polyphenols/g sac) compared to NFRG (6.67 of mg of polyphenols/g sac) after 1 hr. After oral administration of NFRG and FRG to rats, serum concentrations were determined by HPLC. Peak concentrations of Rk1, Rh1, Rc, and Rg5 were approximately 1.64, 2.35, 1.13, and 1.25-fold higher, respectively, for FRG than for NFRG. Furthermore, Rk1, Rh1, and Rg5 increased more rapidly in the blood by the oral administration of FRG versus NFRG. FRG had dramatically improved bioavailability compared to NFRG as indicated by skin permeation, intestinal permeability, and ginsenoside levels in the blood. The significantly greater bioavailability of FRG may have been due to the transformation of its ginsenosides by fermentation to more easily absorbable forms (ginsenoside metabolites).

• Molecular & Cellular Toxicology
• /
• v.1 no.2
• /
• pp.73-77
• /
• 2005

Nickel is the one of potent environmental, the occupational pollutants and the classified human carcinogens. It is a serious hazard to human health, when the metal exposure. To prevent human diseases from the heavy metals, it is seemingly important that understanding of how nickel exerts their toxicity and carcinogenic effect at a molecular and a genomic level. The process of nickel absorption has been demonstrated as phagocytosis, iron channel and diffusion. Uptaked nickel has been suggested to induce carcinogenesis via two pathways, a direct DNA damaging pathway and an indirect DNA damaging pathway. The former was originated from the ability of metal to generate Reactive Oxygen Species (ROS) and the reactive intermediates to interact with DNA directly. Ni-generated ROS or Nickel itself, interacts with DNAs and histones to cause DNA damage and chromosomal abnormality. The latter was originated from an indirect DNA damage via inhibition of DNA repair, or condensation and methylation of DNA. Cells have ability to protect from the genotoxic stresses by changing gene expression. Microarray analysis of the cells treated with nickel or nickel compounds, show the specific altered gene expression profile. For example, HIF-I (Hypoxia-Inducible Factor I) and p53 were well known as transcription factors, which are upregulated in response to stress and activated by both soluble and insoluble nickel compounds. The induction of these important transcription factors exert potent selective pressure and leading to cell transformation. Genes of metallothionein and family of heat shock proteins which have been known to play role in protection and damage control, were also induced by nickel treatment. These gene expressions may give us a clue to understand of the carcinogenesis mechanism of nickel. Further discussions on molecular and genomic, are need in order to understand the specific mechanism of nickel toxicity and carcinogenicity.

• YAKHAK HOEJI
• /
• v.38 no.3
• /
• pp.293-299
• /
• 1994

Forty nine clinical isolates of S. aureus showing resistance to erythromycin(EM) were selected from 83 strains isolated recently in Korea. Fourteen strains of S. aureus showing inducible resistance to MLS antibiotics were selected by disc agar diffusion method. Colony hydridization was executed using two MLS inducible resistance genes, ermA and ermC, identified previously from S. aureus as probes. S. aureus 375 and S. aureus 507 whose genes were not homologous to those probes were finally selected. It was confirmed that the resistance genes of S. aureus 375 and S. aureus 507 had no homology with those probes in southern hybridization test using ermA, ermC and ermAM as probes. It was determined that S. aureus 375 had a plasmid whose size was about 35 kb. To know if the plasmid may have the genes related to inducible resistance to MLS antibiotics, it was attempted to transform Bacillus subtillis BR151 and S. aureus RN4220 with the plasmid isolated from S. aureus 375. It was shown that the gene related to inducible resistance to MLS antibiotics did not exist in this plasmid. These results indicate that two clinical isolates of S. aureus showing inducible resistance to MLS antibiotics have novel genes that have no homology with MLS resistance genes identified so far. It is assumed that these genes may exist in chromosomal DNA.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.37 no.3
• /
• pp.270-279
• /
• 2013

This study presents a T-shirt design process that utilizes modernized traditional patterns; in addition, it also includes various modernization techniques for Korean traditional patterns. T-shirts are a representative casual wear item worn in everyday life, especially among young people. The association of traditional elements and public goods such as T-shirts effects the diffusion of the Korean image into global society. Through the whole design process, target groups and design concepts were determined first: collegiate students as well as clean, natural, refined, simple and sporty image, respectively. Subsequently, Dokkaebi, lotus, Dangcho, dragon and Taegeuk patterns were selected as traditional pattern sources. Along with the technique of the division, transformation, and configuration of original patterns, the combining method of geometrical figures, stripe patterns, and check patterns with traditional patterns was helped create modernized traditional motives. Finally, T-shirt designs with a Korean image were developed with the harmonized deployment of modernized motives and color planning. The survey showed that designs had a clean, natural, refined, simple and sporty image that was preferred by collegiate students. This study is relevant in three aspects. First, the design process of modernization was very creative to combine traditional patterns and basic figures. Second, this study expanded the scope of traditional image design to casual wear to promote the Korean image to young people all over the world. Third, the whole design process, from planning to final product development, presented in this study is applicable to other design processes.

• Korean Journal of Materials Research
• /
• v.14 no.6
• /
• pp.389-393
• /
• 2004

The silicide layer used as a diffusion barrier in microelectronics is typically required to be below 50 nm-thick and, the same time, the silicides also need to have low contact resistance without agglomeration at high processing temperatures. We fabricated Si(100)/15 nm-Ni/15 nm-Co samples with a thermal evaporator, and annealed the samples for 40 seconds at temperatures ranging from $700^{\circ}C$ to $1100^{\circ}C$ using rapid thermal annealing. We investigated microstructural and compositional changes during annealing using transmission electron microscopy and auger electron spectroscopy. Sheet resistance of the annealed sample stack was measured with a four point probe. The sheet resistance measurements for our proposed Co/Ni composite silicide was below 8 $\Omega$/sq. even after annealing $1100^{\circ}C$, while conventional nickel-monosilicide showed abrupt phase transformation at $700^{\circ}C$. Microstructure and auger depth profiling showed that the silicides in our sample consisted of intermixed phases of $CoNiSi_{x}$ and NiSi. It was noticed that NiSi grew rapidly at the silicon interface with increasing annealing temperature without transforming into $NiSi_2$. Our results imply that Co/Ni composite silicide should have excellent high temperature stability even in post-silicidation processes.