• Macromolecular Research
• /
• v.11 no.4
• /
• pp.250-255
• /
• 2003

We prepared the photorefractive sol-gel glass based on organic-inorganic hybrid materials containing a charge transporting molecule, second-order nonlinear optical (NLO) chromophore, photosensitizer, and plasticizer. Carbazole and 2-{ 4-[(2-hydroxy-ethyl)-methyl-amino]-benzylidene}-malononitrile were reacted with isocyanato-triethoxy silane and the functionalized silanes were employed to fabricate the efficient photorefractive media induding 2,4,7-trinitrot1uorenone (TNF) to form a charge transfer complex. The prepared sol-gel glass samples showed a large net gain coefficient and high diffraction efficiency at a certain composition. As the concentration of photosensitizer increased, the photorefractive properties were enhanced due to an increment of charge carrier density. Dynamic behavior of the diffraction efficiency was also investigated with the concentration of the photosensitizer.

• Current Optics and Photonics
• /
• v.1 no.4
• /
• pp.295-307
• /
• 2017

An innovative system for the alternative continuous wide spectral spatial heterodyne spectrometer (ACWS-SHS) is proposed. The relationship between the ACWS-SHS and the wide spectral spatial heterodyne spectrometer (WS-SHS) at the resolution limit, the spectral range, the grating diffraction efficiency and the interference fringes contrast ratio has been analyzed theoretically. Through the comparison of the theoretical analysis and simulation results, it is found that the two systems for the WS-SHS and the ACWS-SHS have the same resolution limit and spectral range, which are ${\delta}{\sigma}$ and ${\sigma}_{01}$, while in the ACWS-SHS system the critical diffraction efficiency of echelle grating is 68.39% and the critical contrast ratio of interference fringes is 0.4135, which is much better than the performance of the WS-SHS system. Therefore, the ACWS-SHS reduces the high requirements for the precision of equipment and expands the application field of SHS effectively.

• Transactions on Electrical and Electronic Materials
• /
• v.5 no.1
• /
• pp.34-37
• /
• 2004

Amorphous chalcogenide thin films, especially a-(Se, S) based films, exhibit a number of photo-induced phenomena. In this study, we make the As$\_$40/Ge$\_$10/Se$\_$15/S$\_$35//Ag thin film and then we measure the holographic diffraction efficiency according to thickness of Ag. And we form the two-dimensional holographic grating. At first, we formed one-dimensional grating and then we form two-dimensional grating by rotate the sample. We found out the most suitable thickness of Ag and in case of As$\_$40/Ge$\_$10/Se$\_$15/S$\_$35//Ag(600${\AA}$), the diffraction efficiency was more higher than other samples. The holographic grating was formed by He-Ne laser(λ=632.8nm). The intensity of incident beam was 2.5mW and incident angle was 20$^{\circ}$. We confirm. the two-dimensional holographic grating by the pattern of diffracted beam and AFM(Atomic Force Microscope) image. We perform the etching process using by 0.26N NaOH in order to confirm clearly two-dimensional grating.

• Transactions of the Society of Information Storage Systems
• /
• v.3 no.4
• /
• pp.173-177
• /
• 2007

A photo-reactive methacrylate monomer having triazine as a core component was examined for photochromic diffractive image formation. Photochromic photopolymer films as a recording media contained a monomer mixture of triazine difunctional metharylate (DT) and ethylene glycol phenyl ether acrylate, binder polymer, photo initiator, and a photochromic spiro-oxazine dye. The content of photochromic dye was changed to examine the effect of photochromophore on diffraction efficiency and real holographic image formation. Holographic recording was performed on the photopolymer film by the combination of reference and probe beam. The diffraction efficiency of the photopolymer film in real-time measurement reached a maximum of $\sim90%$ within 30s. It was highly dependent on the photochromophore contents. After holographic recording, the color of the recorded area was changed under UV light (365 nm) and reversibly bleached to original color upon exposure to a visible light source. Films containing only photochromophore without monomer mixture were not reactive under the recording beam (491nm). Diffractive image formation and mechanism of the holographic recording in the presence of photochromophore will be presented.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.2
• /
• pp.155-160
• /
• 2024

The polarization-selective beam splitter grating can be widely used in numerous optical information processing systems. In this paper, to design a high-efficiency plasma polarization beam splitter (PBS), the structure composed of an Ag metal layer in Littrow mounting is implemented. To achieve high diffraction efficiency in the transmitted 0th-order TE polarization and the reflected 0th-order TM polarization, the grating depth and grating ratio of presented PBS is optimized by using rigorous Modal Transmission-Line Theory. From the optimized results, PBS has advantages of wide band properties for incident wavelength and angle, and the efficiency is higher than 95% for both TE and TM polarization. Therefore, this highly efficient PBS wideband grating with high extinction ratio can be used as an excellent optical diffraction device.

• ETRI Journal
• /
• v.39 no.3
• /
• pp.390-397
• /
• 2017

In this paper, we propose a scheme for designing a tunable pixel layer based on a $Ge_2Sb_2Te_5$ (GST) alloy thin film. We show that the phase change of GST can significantly affect the reflection characteristic when the GST film is embedded into a dielectric encapsulation layer. We investigate the appropriate positions of the GST film within the dielectric layer for high diffraction efficiency, and we prove that they are antinodes of Fabry-Perot resonance inside the dielectric layer. Using the proposed scheme, we can increase the diffraction efficiency by about ten times compared to a bare GST film pixel, and 80 times for the first-to-zeroth-order diffraction power ratio. We show that the proposed scheme can be designed alternatively for a broadband or wavelength-selective type by tuning the dielectric thickness, and we discuss a multi-phase example with a double-stack structure.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.9
• /
• pp.994-1000
• /
• 2004

We studied the characteristics of annular phase gratings as spatial frequency filters. We first calculated the Fraunhofer diffraction patterns of annular gratings and then got the modulation transfer function (MTF) from the zeroth order Hankel transform of the intensity distribution function. Binaryphase annular grating shows higher diffraction efficiency than binary phase rectangular grating. But the MTF decreases linearly in the low-frequency region as that of rectangular grating does. The diffraction pattern of 4-phase annular grating is similar to that of 2-phase grating and hence MTFs of the two are much alike. For 8-phase annular grating, the 7th order diffracted beam is the lowest one next to the first. Consequently, the diffraction efficiency is very high and the MTF graph is curved upward. The diffracted beams except the first order are negligible and hence the MTF characteristics are more improved in the case of 16-phase grating. But the degree of improvement becomes lowered c(Impaled with 8-phase grating. We made a 16-phase annular grating and measured its MTF. The experimental result agrees well with the calculated one.

• Macromolecular Research
• /
• v.16 no.5
• /
• pp.434-440
• /
• 2008

Three-armed, star-shaped molecules containing 4-(N,N-diphenyl)amino-4'-nitroazobenzene chromophores were synthesized to study the diffraction behavior after inscribing surface relief gratings. The two molecules differed in terms of their mode of chromophore attachment to the core. In compound 5, they were bound to the core laterally through alkylene spacers, whereas the chromophores were tethered perpendicularly to the core in compound 4. Although 60 wt% of the polar azobenzene chromophores was comprised of large molecules, no aggregation behavior was observed in the absorption spectra of the thin films. The surface relief gratings were elaborated on the surface of the molecular films by the two-beam interference method. The dynamics of grating formation were studied in terms of the diffraction efficiency using two different film samples made up of two star-shaped molecules. The maximum diffraction efficiency of D-$(ENAZ)_3$, compound 4, was measured to be about 30%, which was significantly high. The mode of chromophore attachment affected the dynamic properties of the diffraction gratings.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.2
• /
• pp.102-111
• /
• 2016

This study develops an efficient and accurate method for calculating nonlinear diffraction beam fields propagating in fluids or solids. The Westervelt equation and quasilinear theory, from which the integral solutions for the fundamental and second harmonics can be obtained, are first considered. A computationally efficient method is then developed using a multi-Gaussian beam (MGB) model that easily separates the diffraction effects from the plane wave solution. The MGB models provide accurate beam fields when compared with the integral solutions for a number of transmitter-receiver geometries. These models can also serve as fast, powerful modeling tools for many nonlinear acoustics applications, especially in making diffraction corrections for the nonlinearity parameter determination, because of their computational efficiency and accuracy.

• Proceedings of the KIEE Conference
• /
• 1994.11a
• /
• pp.385-387
• /
• 1994

Optical interconnections are more attractive than electronic interconnections because of their higher speed, freedom from planar constraints, immunity to electromagnetic interference effects and higher interconnection capacity. Volume hologram is one of the best way to implement optical interconnections. Diffraction efficiency and crosstalk effect are very important things for ensuring independent interconnections. Recently, a general systematic method that can handle a large number of superposed volume gratings in anisotropic host material is presented. In this study for numerical analysis of diffraction, above method is programmed in general form near Bragg angle. Diffraction orders for variation of grating strength are determined by comparing with the coupled-mode method. The effects of parameter variation are considered. Parameters include vertical and azimuthal incident angle, wavelength and interaction length. Diffraction analyses are also performed for intra-mode and inter-mode diffractions.