• Journal of the Korean Wood Science and Technology
• /
• 제37권2호
• /
• pp.141-147
• /
• 2009

The fluctuation of physical properties in wood or wood composites is an important subject when the materials in building and construction. Sorption and desorption occur in wood when exposed to the open air, and the temperature distribution in wood can fluctuate as a result of changes in environmental temperature, solar radiation, humidity, and wind velocity. In this study, the temperature difference and fluctuation caused by outdoor environment among different wood species were analyzed using a numerical method. The effect on the process of heat transfer in wood caused by environmental factors was investigated using 1-dimensional partial differential equation with real boundary and initial conditions. The experimental data have been used to check the accuracy of programming code. Through analysis, it was found out that density and moisture content have a negative effect on thermal diffusivity of wood.

• 대한산업공학회지
• /
• 제31권3호
• /
• pp.240-247
• /
• 2005

Today's hightech society requires thousands of different products which ultimately result in billions of tons of materials discarded, most of which end up in landfills. Therefore industrial circles could not help thinking about environmental problems by regulations of government or pressures of consumer. Generally, the related research subjects are classified into both of environmentally conscious manufacturing and product recovery, where product recovery aims to minimize the amount of waste sent to landfills by recovering materials and parts from old or outdated products by means of recycling and remanufacturing (including reuse of parts and products). In this research, we constructed a model for remanufacturing various goods using a single facility and developed a dynamic programing(DP) algorithm based upon the optimal solution characterization. We showed the efficiency of the developed DP algorithm with a numerical example.

• 통상정보연구
• /
• 제10권2호
• /
• pp.235-261
• /
• 2008

The purpose of the study is to test differences in consumers' satisfactions on products' competitiveness by domestic distribution channels of foreign clothing brands. Domestic distribution channels of foreign clothing brand consist of 5 channels as multi channel strategy. And product's competitiveness consists of prices, qualities, brand image and services. The results from the research show that there are differences in satisfaction by distribution channels. And they imply that distribution channel strategy is used with 5 channels in Korea, which are emphasized with different products' competitiveness. The contribution of the study is to analyze differences in consumer's satisfaction by 5 channels with data from consumer's perspectives, not firms' viewpoints.

• 소성∙가공
• /
• 제9권4호
• /
• pp.413-420
• /
• 2000

In the die casting process, the flow of liquid metal has significant influence on the quality of casting products and die life. For the optimal process design of front housing part of aircon compressor, various analyses were performed in this study by using computer simulation code, MAGMAsoft. The simulation has been focused on the molten metal behaviors during the filling and solidification stages for the sound casting products. Two cases of casting design that have different types of gating system are considered in the analysis. The potential sites where the casting defects may occur is examined by computer simulation and an improved design process is proposed. Also the effect of partial squeeze on the quality of casting products is considered and the optimal time lag after filling process is determined. For the die-stability, the effect of operational parameters such as die temperature, heat cycle and spot cooling on the die life has also been analyzed.

• 생약학회지
• /
• 제4권4호
• /
• pp.181-184
• /
• 1973

In the light of quality comparison the ratio of panaxadiol and panaxatriol contents was assayed in the extract of various ginseng products, whose origin of production and species of the original plants are different. Aglycone compositions of other ginsengs were not comparable with Korean ginseng in their ratio of panaxadiol and panaxatriol contents of dammarane glycosides.

• 생약학회지
• /
• 제36권2호통권141호
• /
• pp.65-69
• /
• 2005

The extract contents of various Phellinus species (Hymenochaetaceae) including P. linteus, P. baumii, P. pini and P. igniarius of domestic and foreign products, were examined to standardize the quality of these products. The differences of various extract contents were identified and compared between different species of Phellinus products. The thin layer chromatographic patterns were also analyzed and six unidentified samples were thought to originate from P. baumii and P. igniarius. The chemical standardization for the quality control of various origins could be suggested by this study.

• Bulletin of the Korean Chemical Society
• /
• 제30권10호
• /
• pp.2381-2386
• /
• 2009

The tetrakis(thio)-substituted-1,4-benzoquinone products 4a-e, 6, 7, and the mono(alkoxy)-tris(thio)-substituted-1,4- benzoquinone products 5a-e and 8a-e were synthesized from the reactions of p-chloranil with some thiols and mixture of two different thiol compounds in alcohol in the presence of $Na_2CO_3$ at room temperature. The structures of the novel S,S,S,S- and S,S,S,O- substituted products, which were obtained by the reactions of p-chloranil as a starting compound with n-propanethiol, n-pentanethiol, n-decanethiol, n-dodecanethiol, 2-methyl-2-propanethiol, and mixture of n-decanethiol and n-cyclohexanethiol as S-nucleophiles, were characterized by spectroscopic methods.

• 한국축산식품학회:학술대회논문집
• /
• 한국축산식품학회 2004년도 정기총회 및 제33차 춘계 학술대회
• /
• pp.239-241
• /
• 2004

pH, proximate analysis and functional properties were not significantly affected by reduced salt levels in NFS which contained 75${\sim}$76% moisture, 14${\sim}$15% protein < 0.5% fat in the final products. However, NFSs had differences in color and EM (%) values as compared to RFS, The results of textural test showed that they were not different with reduced salt levels (0.75${\sim}$1.5%) among the RFS and no-fat treatments (P>0.05). NFS containing 1.0% salt had similar sensory color, flavor and saltiness values to those RFS. These results indicated that NFSs was successfully manufactured with 1.0% salt level and these may contribute to the 'healthier meat products' for consumers due to no-fat and low-salt meat products.

• 대한가정학회지
• /
• 제20권2호
• /
• pp.119-125
• /
• 1982

Based on the selected controlled receipe, drying and frying processes were varied inculding time and temperature. According to the panel test and measurement with a texturometer on the products of different drying and frying conditions, the highly acceptable best product was the one prepared as follows. It was placed in the oven at $45^{\circ}C$ for 5 minutes and then at $23^{\circ}C$for 15 minutes. After turning upside down, this drying step was repeatedly continued for 5 hours. It was also dipped into oil at $14^{\circ}C$ for 1 minute, soaked in oil at $120^{\circ}C$for 2 minutes and then fried in oil at $190^{\circ}C$for 2 minutes. The studies using a texturometer showed the products with high acceptability in the panel test had brittleness of 1.3-2cm and number of peaks 4-6. The optimum drying times is considered as 3 hours since there was no significant difference among the products of 3 to 5 hours drying time.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2002년도 춘계공동학술대회
• /
• pp.686-692
• /
• 2002

Disassembly scheduling is the problem of determining the ordering and disassembly schedules of used products while satisfying the demand of their parts of components over a certain planning horizon. The objective is to minimize the sum of purchase, setup, disassembly operation and inventory holding costs. This paper considers products with assembly structure, i.e. products without parts commonality, and suggests a heuristic in which an initial solution is obtained in the form of the minimal latest disassembly schedule, and then improved considering trade-offs among different cost factors. To show the performance of the heuristic suggested in this paper, computational experiments were done on the modified existing examples and the results show that the heuristic can give optimal of very near optimal solutions within very short computation times.