Browse > Article

A Study on the Distribution and Time Dependent Change of Wood Temperature by Solar Radiation  

Xu, Hui Lan (Department of Forest Products and Technology, College of Agriculture, Chonnam National University)
Kang, Wook (Department of Forest Products and Technology, College of Agriculture, Chonnam National University)
Chung, Woo Yang (Department of Forest Products and Technology, College of Agriculture, Chonnam National University)
Publication Information
Journal of the Korean Wood Science and Technology / v.37, no.2, 2009 , pp. 141-147 More about this Journal
Abstract
The fluctuation of physical properties in wood or wood composites is an important subject when the materials in building and construction. Sorption and desorption occur in wood when exposed to the open air, and the temperature distribution in wood can fluctuate as a result of changes in environmental temperature, solar radiation, humidity, and wind velocity. In this study, the temperature difference and fluctuation caused by outdoor environment among different wood species were analyzed using a numerical method. The effect on the process of heat transfer in wood caused by environmental factors was investigated using 1-dimensional partial differential equation with real boundary and initial conditions. The experimental data have been used to check the accuracy of programming code. Through analysis, it was found out that density and moisture content have a negative effect on thermal diffusivity of wood.
Keywords
wood; solar radiation; temperature distribution; thermal diffusivity;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Dedic, A. 2000. Simplifying convective heat and mass transfer in moisture desorption of beech wood by introducing characteristic transfer coefficients,Holz als Roh-und Werkstoff 58(2): 96-101   DOI   ScienceOn
2 Siau, J. F. 1995. Wood: Influence of Moisture on Physical Properties, Chapter 5
3 Sami A. Al-Sanea. 2003. Finite-Volume Thermal Analysis of Building Roofs under Two-dimensional Periodic Conditions, Building and Environment, 38(8): 1039-1049   DOI   ScienceOn
4 Avramidis, S. and P. Lau. 1992. Thermal Coefficients of Wood Particles by a Transient Heat Flow Method, Holzforschung 46(5): 449-453   DOI
5 Tsilingiris, P. T. 2002. On the Transient ThermalBehavior of Structural Walls - the combined Effect of Time Varying Solar Radiation and Ambient Temperature, Renewable Energy 27(2): 319-336   DOI   ScienceOn
6 Steinhagen, H. P. 1977. Thermal Conductivity Properties of Wood, Green or Dry, from -40$^{\circ}C$ to +100$^{\circ}C$: a Literature Review, Forest Products Laboratory
7 Anton TenWolde, J. Dobbin McNatt, and L. Krahn. 1988. Thermal Properties of Wood and Wood Panel Products for Use in Buildings,OAK RIDGE NATIONAL LABORATORY
8 Oliverti, G., N. Arcuri, and S. Ruffolo. 2003. Experimental Investigation on Thermal Radiation Exchange of Horizontal Outdoor Surfaces, Building and Environment 38(1): 83-89   DOI   ScienceOn
9 Harada, T., T. Hata, and S. Ishihara. 1998. Thermal Constants of Wood during the Heating Process Measured with the Laser Flash Method, Journal of Wood Science 44(6): 425-431   DOI
10 ASHRAE Applications Handbook. 1999. Chapter 32
11 Olek, W., J. Weres, and R. Guzenda. 2003. Effects of Thermal Conductivity Data on Accuracy of Modeling Heat Transfer in Wood, Holzforschung 57(3): 317-325   DOI   ScienceOn
12 Loveday D. L. and A. H. Taki. 1996. Convective Heat Transfer Coefficients at a Plane Surface on a Full-Scale Building Facade, International Journal of Heat and Mass Transfer 39(8): 1729-1742   DOI   ScienceOn
13 Steinhagen H. P. and H. W. Lee. 1988. Enthalpy method to compute radial heating and thawing of logs, Wood Fiber Sci 20(4): 415-421