• Journal of the Korean Institute of Gas
• /
• v.23 no.2
• /
• pp.74-81
• /
• 2019

Expansion turbine system to recover the electricity energy from natural gas transmission stations is a well-known technique. The turbo-expander efficiency depends on the ratio of the natural gas flow rates to the design flow rate of the turbo-expander. However, if there is a big difference of the natural gas flow rate through the pressure letdown station because of seasonal supply pattern, that is, high flow rate in winter while low flow rate in summer, single turbo-expander system is not so efficient as to recover the pressurized energy from the low flow-rate natural gas. Therefore, we have proposed a new concept of double turbo-expander system: one is a big capacity and the other a small capacity. Here we have theoretically computed the electric powers at the pressure reduction from 18.5 bar to 7.5 bar depending on the inlet conditions of temperature and flow rate. The calculated electricity generation has been increased by 30% from 12.4 MW in a single turbo expander to 16.1 MW in the proposed double turbo-expander system when a minimal design efficiency of 0.72 is applied.

• Korean Journal of Environmental Agriculture
• /
• v.37 no.2
• /
• pp.135-140
• /
• 2018

BACKGROUND: The Asian hornet (Vespa velutina nigrithorax), a wasp species, has attacked honey bee populations and affected the beekeeping industry in Korea over the past 15 years. However, little research has been done with this invasive species. In this study, we investigated the intestine bacterial microbiota of Asian hornets and honey bees to design an attractive trap for Asian hornets. METHODS AND RESULTS: Genomic DNAs isolated from the intestine microorganisms of Asian hornets and honey bees were utilized to amplify bacterial 16S rDNA for the comparative sequence analysis. The next generation sequencing analysis identified that the orders Flavobacteriales as the most abundant intestinal microorganisms in Asian hornets, showing a clear difference compared to honey bees in which Aeromonadales are dominant. We also report five newly identified 16S rDNA sequences of Asian hornet intestinal bacteria. According to the sequence blast search, these five bacteria belong to the genera Thalassomonas, Caedobacter, Vampirovibrio, Alkaliphilus and Calothrix. CONCLUSION: While Asian hornets and honey bees show similar intestine bacterial diversity, the relative ratio of bacterial populations is different. providing useful information to design pest control agents specifically targeting Asian hornets.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.20 no.2
• /
• pp.109-120
• /
• 2004

INTRODUCTION: The build-up method has been used for application of porcelain powder on the metal framework to make final tooth shape conventionally. This method takes time and need skill to mimic final shade and shape of porcelain fused to metal crown. The purpose of this study was to develop standard shape and shade laminating porcelain forms to reduce build-up time. METHODS: To make tooth form porcelain paste, several liquid organic compounds were added to conventional feldspathic porcelain. The amount of additives and rheologic property were tested to find out best composition. Comparison of mixing methods to reduced porosity, proper heating schedule, and measurement of shrinkage amount and residual organic materials were performed to set-up standard procedures. Finally, biaxial flexural strength and color of preformed laminated paste porcelain were compared with those of porcelain which fabricated by the conventional build-up method. RESULTS: There was no significant difference in physical properties and color stability between two fabrication methods after various testing methods. Conclusion: This new build-up method can be applied to fabricate the PFM crown and bridge without any loss of strength and optical properties.

• Journal of the Korean Society of Groundwater Environment
• /
• v.6 no.1
• /
• pp.23-32
• /
• 1999

A new numerical method using solution-adaptive grids (SAG) is developed to solve the Richards' equation (RE) for unsaturated flow in porous media. Using a grid generation technique, the SAG method automatically redistributes a fixed number of grid points during the flow process, so that more grid points are clustered in regions of large solution gradients. The method uses the coordinate transformation technique to employ a new transformed RE, which is solved with the standard finite difference method. The movement of grid points is incorporated into the transformed RE, and therefore all computation is performed on fixed grid points of the transformed domain without using any interpolation techniques. Thus, numerical difficulties arising from the movement of the wetting front during the infiltration process have been substantially overcome by the new method. Numerical experiments for an one-dimensional infiltration problem are presented to compare the SAG method to the modified Picard method using a fixed grid. Results show that accuracy of a SAG solution using 41 nodes is comparable with the solution of the fixed grid method using 201 nodes, while it requires only 50% of the CPU time. The global mass balance and the convergence of SAG solutions are strongly affected by the time step size (Δt) and the weighting parameter (${\gamma}$) used for generating solution-adaptive grids. Thus, the method requires automated readjustment of Δt and ${\gamma}$ to yield mass-conservative and convergent solutions, although it may increase computational costs. The method can be effective especially for simulating unsaturated flow and other transport problems involving the propagation of a sharp-front.

• KOMUNHWA
• /
• no.70
• /
• pp.109-132
• /
• 2007

Taking the Yosu Peninsula where prestige goods were prevalent and more dolmen were excavated and surveyed than other regions as object of the research, this dissertation investigated the hierarchy of dolmen society. The dolmen groups were excavated and surveyed at some 20 positions in Yosu Peninsula Analyzing the number, weight of upper stone, location, the buried relics of dolmen, the hierarchy for each dolmen group can be summarized as follows. It seems that the large group with a lot of dolmen and big upper stone which is located on the plane with stream or on the lower part of hill might be the central group with abundant buried relics. However, the size of individual upper stone does not coincide with buried relics sometimes. Thus, it is required to review the entirety of dolmen group rather than individual upper stone in the relation between the scale of upper stone and buried relics. Then the scale of tomb is proportionate to the prestige goods. Meanwhile, the discrepancy between dolmens can be verified by the difference among upper stone, tomb, burial accessories, etc in the unit dolmen group. Since dolmen is the tomb of some inhabitants in the Bronze Age, the existence of stone coffin tomb with buried bronze sword, jade or stone sword compared to the stone coffin with no relics means that there was powerful representative of one generation even in one kindred group on the basis of wealth or authority. It can be concluded that the upper stone or large tomb or prestige goods among the persons buried in dolmen were fixed as high class, those with relatively small stone coffin with no or scanty burial accessories were fixed as medium class and multitudinous class who were not buried in dolmen were fixed as low class. Therefore, the dolmen society in Yosu Peninsula shows that there was division of class in the unit dolmen group as well as hierarchy in the group.

• 한국해양학회지
• /
• v.29 no.2
• /
• pp.152-163
• /
• 1994

The characteristics and fluctuations of structures and spatial distributions of warm eddies (anticyclonic eddies) in the southwestern part of the East Sea (the Japan Sea) are discussed based on the data gathered y the Fisheries Research and Development Agency, Korea from 1967 to 1968. The warm eddies existed very often in the southwest of the Ullung Island. The warm eddies are elliptical in shape and the mean size is about 130 km in diameter. Bimonthly distributions of warm eddies, the largest value of observed frequency and diameter in August and the least in June, indicate that the generation of the warm eddy is related with the development of the East Korean Warm Current. The warm eddies move west, north or southward with 0.80∼2.50 cm/sec or stay over a few months at the same place southwest of the Ullung Island. Movement of warm eddies may be influenced by the neighboring currents, the Rossby wave and the topography. The relationship between the position of warm eddies and the bottom topography suggests that the development and the movement of warm eddies are controlled by the Ullung Basin. The warm eddies should be divided into two groups. One group is the shallow warm eddy with strong baroclinic characteristics and the other is the deep one with strong Barotropic characteristics. The shallow group seems to be closely related with positive values (in summer) of the sea level difference between Pusan and Mozi (the Tsushima Current), while the deep group has no relation with that.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.5
• /
• pp.346-355
• /
• 2005

To investigate the application of biochemical markers' and small-sample methods using whole-wheat flours for screening in early generation in Korean wheat breeding system, 74 Korean wheats, including cultivars, local breeding lines and experimental lines, were analyzed. Seed storage protein and amylose contents of grains were evaluated. Biochemical makers, including granule bound starch synthase (GBSS), high molecular weigh glutenin subunits (HMW-GS) and friabilin were also evaluated by using one-dimensional sodium dodecyl sulfate-polyacryla-mide gel electrophoresis with a single kernel. The small­sample methods, including modified SDS-sedimentation test (MST), micro-alkaline water retention capacity (AWRC) and whole-wheat flour swelling volume (WSV) were also tested in this study. Protein content, MST and AWRC was $11.0 - 15.8\%$, 2.7 - 26.2 ml and $71.9 - 109.7\%$, respectively. Apparent and total amylose content and WSV was $20.6 - 25.0\%$, $26.1 - 32.4\%$ and 9.0 - 16.9 ml, respectively. There were highly significant correlations between MST and AWRC (r=0.592, P<0.001), but Korean wheats showed no significant difference in protein content, amylose content and small-sample methods. In the biochemical markers, Korean wheats contained all three GBSS encoded by Wx loci, except for Suwon 252. Korean wheats showed the high frequency ($58.1\%$) of 1Dx2.2 + 1Dy12 subunits of HMW-GS. Friabilin band was present in 46 lines ($62.2\%$) and absent in 28 lines ($37.8\%$). Friabilin-absence lines showed the higher MST (14.9 ml) and AWRC ($92.1\%$) value than friabilin-presence lines (8.5 ml and $82.4\%$, respectively).

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.6
• /
• pp.527-534
• /
• 2015

This study offers a novel method for improving the physical contact between the anode and fuel in a direct carbon fuel cell (DCFC): a direct generation of carbon in a porous Ni anode through the thermal decomposition of gaseous hydrocarbons. Three kinds of alkane hydrocarbons with different carbon numbers (CH4, C2H6, and C3H8) are tested. From electron microscope observations of the carbon particles generated from each hydrocarbon, we confirm that more carbon spheres (CS), carbon nanotubes (CNT), and carbon nanofibers (CNF) were identified with increasing carbon number. Raman scattering results revealed that the carbon samples became less crystalline and more flexible with increasing carbon number. DCFC performance was measured at $700^{\circ}C$ with the anode fueled by the same mass of each carbon sample. One-dimensional carbon fuels of CNT and CNF more actively produced and had power densities 148 and 210 times higher than that of the CS, respectively. This difference is partly attributed to the findings that the less-crystalline CNT and CNF have much lower charge transfer resistances than the CS.

• Journal of Advanced Navigation Technology
• /
• v.18 no.1
• /
• pp.35-43
• /
• 2014

In this paper, it is about to non-contact wireless power transmission according to various conditions of self induction principle between the two planar coils at a transmission unit and a receiving unit based on the theory of wireless power transmission. The experiments are occurred in order to power transfer of noncontact method from designed wireless circuits in the primely coil and secondary coil, and the applying to Half Bridge Resonant converter transmission unit and receiving unit. and that were able to prepared circumstance to calculate of the output voltage and power source. The main power of the inductive coupling the resonant converter at the transmission unit is converted electrical energy using the solar cell module and artificial light source (halogen lamp) as a replace light and received 24 V power supply from solar power was used a input power source for the wireless power transmission device. Experimental results, to received of power is used to illuminate the lighting and to charge the battery in receiving circuit.And the wireless power transmission efficiency measured at the output side of the transmission unit is obtained about 70% to 89% compared to input power of receiving unit.In addition, efficiency were tested through ID verification method and comparing the phase difference between the voltage when foreign substances interfere with wireless power transmission.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.2 no.1
• /
• pp.1-11
• /
• 1999

The Korean government is developing a systematic plan of integrated coastal management for effective conservation, utilization, and development of coastal areas. For this plan, integrated maps of land maps and nautical charts are indispensable. However, these maps are not made, nor studied yet in terms of integration, although digital maps(DM) on land and electronic nautical charts(ENC) have been recently developed by Korean Geography Institute and National Marine Investigation Institute, respectively. In this study, as preliminary studies to make eventual integrated maps, the concept of coastal areas are defined, specifically, coastal lines from DM and ENC are matched against each other. Issues on map production procedures, coordinate systems, and map projections, are carefully considered. A test coastal area located in Seo-Gu, Pusan, over 14 km of coastal lines is selected for the edge matching of coastal lines. RMS differences are 13.83 m and 4.37 m over man-made coastal lines and natural coast lines, respectively, which are quite larger considering a scale difference and other factors. However, no systematic differences are found.