본 논문에서는 양극반응과 복합 산화법($H_2O/O_2$ 분위기에서 $500^{\circ}C$, 1시간 열산화와 $1050^{\circ}C$, 2분간 RTO(Rapid Thermal Oxidation) 공정)을 이용한 두꺼운 OPSL(Oxidized Porous Silicon Layer)을 형성하여 이를 마이크로머시닝 기술을 이용함으로써 $10\;{\mu}m$ 두께의 OPS(Oxidized Porous Silicon) 에어 브리지를 제조하고, 그 위에 전송선로를 형성하여 그 RF 특성을 조사하였다. OPS 에어 브리지 위에 형성된 CPW(Coplanar Waveguide)의 손실이 OPSL 위에 형성된 전송선의 삽입손실보다 약 2dB 정도 적은 것을 보여주었으며, 반사손실은 OPSL 위에 형성된 전송선의 반사손실보다 적으며 약 -20 dB를 넘지 않고 있다. 본 연구에서 개발한 산화된 다공질 실리콘 멤브레인 및 에어 브리지 구조는 CMOS 공정 후에 사용 가능하며, 초고주파 회로 설계시 편리성과 유용성을 제시하고 있다.
PSG(800nm)/$Si_3N_4$ (150nm)로 구성된 유전체 membrane 윗면에 heater와 감지전극을 등일면상에 동시에 형성하였다. 제작된 소자의 전체 면적은 $3.78{\times}3.78mm^2$이고, diaphragm의 면적은 $1.5{\times}1.5mm^2$이며, 감지막치 면적은 $0.24{\times}0.24mm^2$였다. 그리고 diaphragm내의 열분포 분석을 유한요소법을 이용하여 수행하였으며, 실제로 제작된 소자의 열분포와 비교하였다. 소비전력은 동작온도 $350^{\circ}C$에서 약 85mW였다. Sn 금속막을 상온과 $232^{\circ}C$의 두 가지 기판온도에서 열증착하였고, 이를 $650^{\circ}C$의 산소분위기에서 3시간 열산화함으로써 $SnO_2$ 감지막을 형성하였다. 그리고 이를 SEM과 XRD로 특성을 분석하였다. 제작된 소자에 대해서 온도 및 습도에 대한 감지막의 영향 및 부탄가스에 대한 반응특성도 조사하였다.
본 논문에서는 Al 및 TiW 금속을 상하층 전극으로 사용하고 이들 금속사이에 절연물이 존재하는 금속-절연물-금속(metal-insulator- metal : MIM) 구조의 안티휴즈 소자를 만들고 금속층간 절연물의 성질에 따른 안티휴즈 특성에 대하여 연구하였다. 금속층간 절연물로는 R.F 스퍼터링법에의해 형성된 실리콘 산화막과 탄탈륨 산화막으로 구성된 이층 절연물을 사용하였다. 이러한 안티휴즈 구조에서 실리콘 산화막은 프로그램 전의 안티휴즈 소자를 통해 흐르는 누설전류를 감소시켰으며, 실리콘 산화막에 비해 절연 강도가 낮은 탄탈륨 산화막은 안티휴즈 소자의 절연파괴전압을 저 전압으로 낮추는 역할을 하였다. 최종적으로 제조된 $Al/Ta_{2}O_{5}(10nm)/SiO_{2}(10nm)/TiW$ 구조에서 1 nA 이하의 누설전류와 약 9V의 프로그래밍 전압을 갖고 수 초내에 프로그램이 완성되는 전기적 특성이 안정된 안티휴즈 소자를 제조하였다. 그리고 이때 소자의 OFF 및 ON 저항은 각각 $3.65M{\Omega}$ 및 $7.26{\Omega}$이었다. 이와 같은 $Ta_{2}O_{5}/SiO_{2}$ 구조에서 각 절연물의 두께를 조절함으로써 측정 전압에 민감하고 재현성 있는 안티휴즈 소자를 제조할 수 있었다.
For more than three decades, the gate dielectrics in CMOS devices are $SiO_2$ because of its blocking properties of current in insulated gate FET channels. As the dimensions of feature size have been scaled down (width and the thickness is reduced down to 50 urn and 2 urn or less), gate leakage current is increased and reliability of $SiO_2$ is reduced. Many metal oxides such as $TiO_2$, $Ta_2O_4$, $SrTiO_3$, $Al_2O_3$, $HfO_2$ and $ZrO_2$ have been challenged for memory devices. These materials posses relatively high dielectric constant, but $HfO_2$ and $Al_2O_3$ did not provide sufficient advantages over $SiO_2$ or $Si_3N_4$ because of reaction with Si substrate. Recently, $HfO_2$ have been attracted attention because Hf forms the most stable oxide with the highest heat of formation. In addition, Hf can reduce the native oxide layer by creating $HfO_2$. However, new gate oxide candidates must satisfy a standard CMOS process. In order to fabricate high density memories with small feature size, the plasma etch process should be developed by well understanding and optimizing plasma behaviors. Therefore, it is necessary that the etch behavior of $HfO_2$ and plasma parameters are systematically investigated as functions of process parameters including gas mixing ratio, rf power, pressure and temperature to determine the mechanism of plasma induced damage. However, there is few studies on the the etch mechanism and the surface reactions in $BCl_3$ based plasma to etch $HfO_2$ thin films. In this work, the samples of $HfO_2$ were prepared on Si wafer with using atomic layer deposition. In our previous work, the maximum etch rate of $BCl_3$/Ar were obtained 20% $BCl_3$/ 80% Ar. Over 20% $BCl_3$ addition, the etch rate of $HfO_2$ decreased. The etching rate of $HfO_2$ and selectivity of $HfO_2$ to Si were investigated with using in inductively coupled plasma etching system (ICP) and $BCl_3/Cl_2$/Ar plasma. The change of volume densities of radical and atoms were monitored with using optical emission spectroscopy analysis (OES). The variations of components of etched surfaces for $HfO_2$ was investigated with using x-ray photo electron spectroscopy (XPS). In order to investigate the accumulation of etch by products during etch process, the exposed surface of $HfO_2$ in $BCl_3/Cl_2$/Ar plasma was compared with surface of as-doped $HfO_2$ and all the surfaces of samples were examined with field emission scanning electron microscopy and atomic force microscope (AFM).
유러퓸-활성화 스트론튬 오쏘실리케이트($Sr_2SiO_4:Eu^{2+}$) 황색 형광체 분말의 소수성 코팅을 위하여 상압 유전체배리어 방전 플라즈마가 사용되었다. 전구물질은 헥사메틸다이실록세인(HMDSO), 톨루엔 및 n-헥세인이었으며, 운반기체는 아르곤이었다. 엑스선 회절분석 결과 플라즈마 코팅 처리 후에도 오쏘실리케이트의 격자구조는 변화가 없는 것으로 나타났다. 플라즈마 코팅된 형광체 분말의 특성은 주사전자현미경, 형광분광광도계, 접촉각 분석을 통해 조사되었다. HMDSO를 사용한 형광체 분말의 소수성 코팅시 물 접촉각은 $21.3^{\circ}$ (코팅 전)에서 $139.5^{\circ}$ (최대 $148.7^{\circ}$)로 증가되었고, 글리세롤 접촉각은 $55^{\circ}$ (코팅 전)에서 $143.5^{\circ}$ (최대 $145.3^{\circ}$)로 증가되었는데, 이 결과는 형광체 분말 표면에 소수성 박막 층이 잘 형성되었음을 나타낸다. 퓨리에변환적외선분광기 및 엑스선광전자분광기를 이용한 표면분석을 통해서도 형광체 분말에 소수성 박막 층이 잘 형성되어 있음을 알 수 있었다. HMDSO를 사용한 소수성 코팅 후 형광체의 광발광 효율이 증가하는 것으로 나타났으나, 톨루엔과 n-헥세인을 전구물질로 사용했을 때는 광발광 효율이 다소 저하되었다. 본 연구의 결과는 유전체배리어방전 플라즈마가 분말 형태인 형광체의 코팅에 이용될 수 있는 실용적인 방법임을 나타낸다.
[ $MgAl_2O_4$ ] 막은 MgO 보호막 보다 단단하며 수분 흡착 오염 문제에 상당히 강한 특성을 가진다. 본 연구에서 AC-PDP 의 유전체보호막으로 사용되는 MgO 보호막의 특성을 개선하기 위해 $MgAl_2O_4/MgO$ 이중층 보호막을 제작하여 특성을 조사하였다. 전자빔 증착기를 사용하여 Cu 기판에 MgO 와 $MgAl_2O_4$을 각각 $1000\AA$ 두께로 증착, $MgAl_2O_4/MgO$ 을 $200/800\AA$ 두께로 적층 증착 후, 이온빔에 의한 충전현상을 제거하기 위해 Al 을 $1000\AA$ 두께로 증착하였다. 집속 이온빔 (focused ion beam: FIB) 장치를 이용하여 10 kV 에서 14 kV 까지 이온빔 에너지에 따라 MgO는 $0.364{\sim}0.449$ 값의 스퍼터링 수율에서 $MgAl_2O_4/MgO$ 을 적층함으로 $24{\sim}30 %$ 낮아진 $0.244{\sim}0.357$ 값의 스퍼터링 수율이 측정되었으며, $MgAl_2O_4$는 가장 낮은 $0.088{\sim}0.109$ 값의 스퍼터링 수율이 측정되었다. g-집속이온빔 (g-FIB) 장치를 이용하여 $Ne^+$ 이온 에너지를 50 V 에서 200 V 까지 변화시켜 $MgAl_2O_4/MgO$ 와 MgO 는 $0.09{\sim}0.12$의 비슷한 이차 전자방출 계수를 측정하였다. AC- PDP 셀의 72 시간 열화실험 후 SEM 및 AFM으로 열화된 보호막의 표면을 관찰하여 기존의 단일 MgO 보호막과 $MgAl_2O_4/MgO$의 적층보호막의 열화특성을 살펴보았다.
최근 유연 디스플레이에 관한 대중의 관심이 증대됨에 따라 롤러블(rollable), 폴더블(foldable) 디스플레이와 같은 우수한 폼 팩터(form factor)를 지닌 차세대 유연(flexible) 디스플레이가 주목받고 있다. 유연 디스플레이의 기계적 신뢰성 확보 측면에서, 내부 절연막으로 활용되는 실리콘 질화물(SiNx) 박막은 구동 중 발생하는 응력에 매우 취약하므로 기계적 물성을 정확히 파악하여 파손을 예측하고 패널의 전기적 단락을 방지하는 것이 중요하다. 본 논문에서는, ~130 nm, ~320 nm 두께의 SiNx 박막 박막 상부에 ~190 nm 두께의 유기 나노 보강층(PMMA, PS, P3HT)을 코팅하여 이중층 구조로 인장함으로써 매우 취성한 SiNx 박막의 탄성 계수와 인장 강도 및 연신율을 측정하는 데 성공하였다. 챔버 압력 및 증착 파워를 조절한 공정 조건(A: 1250 mTorr, 450 W/B: 1000 mTorr, 600 W/C: 750 mTorr, 700 W)을 통해 제작된 ~130 nm SiNx 의 탄성계수는 A: 76.6±3.5, B: 85.8±4.6, C: 117.4±6.5 GPa로, ~320 nm SiNx는 A: 100.1±12.9, B: 117.9±9.7, C: 159.6 GPa로 측정되었다. 결과적으로, 동일 공정 조건 하에서 SiNx 박막의 두께가 증가할수록 탄성 계수가 증가하는 경향을 확인하였으며, 유기 나노 보강층을 활용한 인장 시험법은 파손되기 쉬운 취성 박막의 기계적 물성을 높은 정밀도로 측정하는 데 효과적이었다. 본 연구에서 개발된 방법은, 취약한 디스플레이용 박막의 정량적인 기계적 물성 파악을 가능케하여 강건한 롤러블, 폴더블 디스플레이의 설계에 이바지할 수 있을 것으로 기대한다.
High capacitance X5R MLCCs based on $BaTiO_3$ ceramic dielectric layers exhibit a single broad, asymmetric arc shape impedance and modulus response over the wide frequency range between 1 MHz to 0.01 Hz. Analysis according to the conventional brick-layer model for polycrystalline conductors employing a series connection of multiple RC parallel circuits leads to parameters associated with large errors and of little physical significance. A new parametric impedance model is shown to satisfactorily describe the experimental spectra, which is a parallel network of one resistor R representing the DC conductivity thermally activated by 1.32 eV, one ideal capacitor C exactly representing bulk capacitance, and a constant phase element (CPE) Q with complex capacitance $A(i{\omega})^{{\alpha}-1}$ with ${\alpha}$ close to 2/3 and A thermally activated by 0.45 eV or ca. 1/3 of activation energy of DC conductivity. The feature strongly indicate the CK1 model by J. R. Macdonald, where the CPE with 2/3 power-law exponent represents the polarization effects originating from mobile charge carriers. The CPE term is suggested to be directly related to the trapping of the electronic charge carriers and indirectly related to the ionic defects responsible for the insulation resistance degradation.
The 2-dimensiona electron gas (2DEG) layers have opened tremendous interests in the heterooxide interfaces formed between two insulating materials, especially between LaAlO3 and $SrTiO_3$. The 2DEG layers exhibit extremely high mobility and carrier concentrations along with metallic transport phenomena unlike the constituent oxide materials, i.e., $LaAlO_3$ and $SrTiO_3$. The current work inserted artificially the interfacial layer, $Sr_xCa_{1-x}TiO_3$ between $LaAlO_3$ and $SrTiO_3$, with the aim to controlling the 2-dimensional transports. The insertion of the additional materials affect significantly their corresponding electrical transports. Such features have been probed using DC and AC-based characterizations. In particular, impedance spectroscopy was employed as an AC-based characterization tool. Frequency-dependent impedance spectroscopy have been widely applied to a number of electroceramic materials, such as varistors, MLCCs, solid electrolytes, etc. Impedance spectroscopy provides powerful information on the materials system: i) the simultaneous measurement of conductivity and dielectric constants, ii) systematic identification of electrical origins among bulk-, grain boundary-, and electrode-based responses, and iii) the numerical estimation on the uniformity of the electrical origins. Impedance spectroscopy was applied to the $LaAlO_3/Sr_xCa_{1-x}TiO_3/SrTiO_3$ system, in order to understand the 2-dimensional transports in terms of the interfacial design concepts. The 2-dimensional conduction behavior system is analyzed with special emphasis on the underlying mechanisms. Such approach is discussed towards rational optimization of the 2-dimensional nanoelectronic devices.
Dianhydride로서 1,2,4,5-benzenetetracarboxylic dianhydried(PMDA)와 2,2'-bis(3,4-dicarboxyphenyl) hexafluoropropane dianhydride(6FDA)를, diamine으로서 1,4-phenylenediamine(PDA)을 사용하여 homopolyimides인 PMDA-PDA, 6FDA-PDA와 다른 당량비의 copolyimides를 각각의 ploy(amic acid)로부터 제조하였다. 이들 박막에 대하여, thin film stress analyzer(TFSA)를 이용하여 공중합체 폴리이미드 박막의 잔류 응력거동을 공정온도 ($25{\sim}400^{\circ}C$)하에서 전구체의 열적 이미드화에 따라 in-situ로 측정하였고, WAXD분석을 통해 모폴로지 변화를 알아보았다. 다른 단량비로 이루어진 공중합체 폴리이미드 박막의 잔류 응력 결과는 PMDA 분율이 증가함에 따라 잔류 응력이 큰 폭으로 감소하였고 순수 PMDA-PDA 폴리이미드에서는 압축모드로 5 MPa로 나타났다. 본 연구에서는 PMDA-PDA의 높은 $T_g$로 인한 공정상의 어려움과 6FDA-PDA의 상대적으로 높은 응력을 서로 보완해 기계적 물성이 좋은 저응력의 폴리이미드를 만들 수 있음을 보였다. 즉, random한 PMDA/6FDA-PDA 공중합체 폴리이미드 합성을 이용하여 사슬 내에 벌키한 di(trifluoromethyl)기와 같은 관절기로 인한 상대적으로 높은 응력을 보이는 6FDA-PDA 폴리이미드 사슬 내에 강직한 사슬 구조를 가진 PMDA-PDA 폴리이미드의 사슬 구조를 적당량 첨가함으로써 우수한 기계적 물성을 갖는 저응력 폴리이미드를 만들 수 있었다. 특히, PMDA/6FDA-PDA (0.9:0.1:1.0) 폴리이미드가 저유전 상수 층간 절연막으로서의 우수한 기계적 물성과 낮은 응력 수준을 보여주고 있다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.