• Industry Promotion Research
• /
• v.7 no.4
• /
• pp.9-15
• /
• 2022

This study evaluated the automated system of the roll bending process, which is one of the difficult processes. In the past, 20 cartridges were produced per hour. but Automation changed it to a process that produces 50 pieces per hour. The average value of production was 57.6 pieces per hour, error of repeatability was 0.03 mm, average roll diameter error value was 0.49 mm, average alignment error value was 0.09 mm and average process lead time was 43.21 seconds. This paper presented specific evaluation methods such as productivity, repeatability, defect rate, alignment defect rate, and process lead time. It is thought that the contents performed in this study will be helpful in the verification of other automation systems in the future.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.5
• /
• pp.543-549
• /
• 2021

The stock market plays a crucial role in the growth of industry and trade, which eventually affects the economy. This paper studies the determinants of stock market development in Jordan using yearly time-series data (1978-2019). The autoregressive distributed lag approach is applied to examine co-integration, while the vector error correction model is employed to estimate (long-run and short-run) causal relationships. The results show that macroeconomic determinants such as gross domestic product, gross domestic savings, investment rate, credit to the private sector, broadest money supply, stock market liquidity, and inflation rate are important determinants of stock market development. These findings provide vital implications for policymakers in developed and emerging stock markets. First, economic development plays an imperative role in stock market development. Second, developing the banking sector is mandatory because it can significantly promote stock market development. Third, domestic investment is a significant determinant of stock market development, especially in emerging countries. However, it is vital to launch policies that lead to encourage investment and promote stock market development, and this could be done through (1) encouraging competition, (2) improving the institutional framework, and (3) removing trade blocks by establishing a mutual connection between foreign private investment entities and government authorities.

• Structural Engineering and Mechanics
• /
• v.74 no.6
• /
• pp.747-756
• /
• 2020

High-strength concrete (HSC) generally is made with high amount of cement which may release large amount of hydration heat at early age. The hydration heat will increase the internal temperature of slab and may cause potential cracking. In this study, slab specimens with a dimension of 600 × 600 × 100 mm were cast with concrete incorporating silica fume for test. The thermistors were embedded in the slabs therein to investigate the interior temperature development. The test variables include water-to-binder ratio (0.25, 0.35, 0.40), the cement replacement ratio of silica fume (RSF; 5 %, 10 %, 15 %) and fly ash (RFA; 10 %, 20 %, 30 %). Test results show that reducing the W/B ratio of HSC will enhance the temperature of first heat peak by hydration. The increase of W/B decrease the appearance time of second heat peak, but increase the corresponding maximum temperature. Increase the RSF or decrease the RFA may decrease the appearance time of second heat peak and increase the maximum central temperature of slab. HSC slab with the range of W/B ratio of 0.25 to 0.40 may occur cracking within 4 hours after casting. Reducing W/B may lead to intensive cracking damage, such as more crack number, and larger crack width and length.

• Nuclear Engineering and Technology
• /
• v.40 no.5
• /
• pp.349-364
• /
• 2008

Over the years, probabilistic risk assessment (PRA) research activities conducted at the U.S. Nuclear Regulatory Commission (NRC) have played an essential role in support of the agency's move towards risk-informed regulation. These research activities have provided the technical basis for NRC's regulatory activities in key areas; provided PRA methods, tools, and data enabling the agency to meet future challenges; supported the implementation of NRC's 1995 PRA Policy Statement by assessing key sources of risk; and supported the development of necessary technical and human resources supporting NRC's risk-informed activities. PRA research aimed at improving the NRC's understanding of risk can positively affect the agency's regulatory activities, as evidenced by three case studies involving research on fire PRA, human reliability analysis (HRA), and pressurized thermal shock (PTS) PRA. These case studies also show that such research can take a considerable amount of time, and that the incorporation of research results into regulatory practice can take even longer. The need for sustained effort and appropriate lead time is an important consideration in the development of a PRA research program aimed at helping the agency address key sources of risk for current and potential future facilities.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.2
• /
• pp.126-132
• /
• 2005

In this paper, an auto-design system is introduced for a stamping tool based on commercial computer aided design system with its drafting language. The auto-design system consists of tool oriented product design subsystem which modifies and configures the product drawing, tool concept design subsystem which make a design of the punches and their punching progression and parts design subsystem that makes automatic dimension. The system is applied to the mechanical design of the stamping tool. The main logic of the system is based on half-edge theory, a kernel for the 3 dimensional CAD system, which is applied to 2 dimensional drafting auto-design system. The auto-design system enables to conspicuously reducing the designing time of the tool. In addition, there is little drafting error that had been about 3% without auto design program. It is effective to reduce the development time for new products because of rapid designing time of the tools, standardization of the stamping tool and the drafting rule for the auto-design system. The auto-design system yields high efficiency of the tool manufacturing system.

• Transactions of Materials Processing
• /
• v.17 no.2
• /
• pp.124-129
• /
• 2008

Net shape forging technologies give many effects into the costs and qualities for the finished products. So, the studies to reduce the additional machining amount are very important in forging industry. Specially, there are two main topics in cold forging industry, such as, tool life and precision forging. In this study, new forging technique was proposed to eliminate the machining process for fixing up the length and improve the lead accuracy of gear. The luck-up hub is manufactured through many processes, such as upsetting, piercing and direct extrusion. The gear is formed in direct extrusion process; however, lead accuracy of the gear is over allowance limit. Therefore, the additional sizing process must be added. In this study, process design for closed-die forging of a lock-up hub used for a component of automobile transmission was made using three-dimensional finite element simulations, and the strain distributions and velocity distributions are investigated through the post processor. The rigid-plastic finite-element method for back pressure forging has been used in order to reduce development time and die cost. Using the FEM simulation, we found the optimum value of back pressure. The prototypes of lock-up hub parts were forged into the net-shape. In the experiment, lead precision of tooth are measured by the CCMM(Contact Coordinate Measuring Machine). The dimensional accuracy of forged part was improved up to the 40% when back press was applied.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.5
• /
• pp.829-837
• /
• 2021

The study investigates the impact of the Counter-Cyclical Buffer Policy (CCB) on regional development bank profitability in Sumatra, Indonesia. CCB requires banks to hold capital at times when credit is growing rapidly so that the buffer can be reduced if the financial cycle turns down or the economic and financial environment becomes substantially worse. This study employs time series data of regional development banks (RDBs) in Sumatra Island, Indonesia. The methodology applied in this study is a panel dynamic model with Generalized Methods of Moments (GMM). The results show that increasing capital through the implementation of CCB did not have a significant effect on RDBs' profitability. The findings of this study suggest that the activation and implementation of CCB lead to an increase in the amount and cost of loans to companies but do not affect the profitability of RDBs. The value of a Non-Performing Loan (NPL) proved to have a negative and significant effect on bank profitability. The CCB policy aims to overcome the pro-cyclicality of credit growth and improve bank resilience through increased capital which is expected to reduce excessive credit growth as a source of systemic risk. This causes a lack of lending to the community so that the profits obtained by the bank decrease.

• 제어로봇시스템학회:학술대회논문집
• /
• 1999.10a
• /
• pp.226-229
• /
• 1999

We have been developing a method to build models for time series using Genetic Programming. The proposed method has been applied to various kinds of time series e.g. computer-generated chaos, natural phenomena, and financial market indices etc. Now we apply the prediction method to time histories of seismic ground motion i.e. one-step-ahead prediction of seismographic amplitude. Waves of earthquakes are composed of P-waves and S-waves. They propagate in different speeds and have different characteristics. It is believed that P-waves arrive firstly and S-waves arrive secondly. Simulations were performed based on real data of Hyuganada earthquake which broke out at southern part of Kyushuu Island in Japan. To our surprise, prediction model built using the earthquake waves in early time can enough precisely predict main huge waves in later time. Lots of experiments lead us to conclude that every slice of data involves P-wave and S-wave. The simulation results suggest the GP-based prediction method can be utilized in alarm systems or dispatch systems in an emergency.

• Journal of Korean Port Research
• /
• v.6 no.1
• /
• pp.49-68
• /
• 1992

Recently changes in the technological environment of marine transportation and the increase of traffic volume have fostered a revolution in the design and operation of port and also playing a major role in the development of new types of port in Asian. These changes are dynamic and will continue to influence port physical distribution system. The port of Pusan has been hardly able to handle the traffic increases in recent years by expansion increased mechanization and other operational and institutional improvements but, further traffic increases bring about critical congestion and such congestion is an economic cost to the country in terms of cost of physical distribution. This paper treats the development of entirely new port of Pusan and related transportation system by considering the existing or expected need for improved port capacity and services. The western part of GADUK island is selected as the optimum port site through the detailed analysis of the physical requirement and careful consideration of regional development and since the lead time of the national development plan including the port project from initial planning to implementation is considered as long as 7 to 10 years the aggregated master plan for port development is made and implemented in the year of 2012.

• Journal of the Korea Safety Management & Science
• /
• v.5 no.1
• /
• pp.83-92
• /
• 2003

Scheduling plays an important role in shop floor planning. A scheduling shows the planned time when processing of a specific job will start on each machine that the job requires. It also indicates when the job will be completed on every process. Thus, it is a timetable for both jobs and machines. There is only one server available and arriving work require services from this server. Job are processed by the machine one at a time. The most common objective is to sequence jobs on the severs so as to minimize the penalty for being late, commonly called tardiness penalty. Based on other objectives, many criteria may serve as s basis for developing job schedules. The process also comprises all strategic planning, capital investments, management decisions, and tasks necessary to create a new product. manufacturing processes must be created so that the product can be produced in the product facility. Purchasing new equipment and training workers may be required if new technology is to be used. Tools, fixtures, and the sequence of steps in the manufacturing processes must all be developed to allow rapid, high-quality, cost effective production. Also, it may be needed to be rearrange the production facility to adapt to the new manufacturing processes. Therefore, this study tries to proposed that Scheduling by customer needs group for minimizing the problem and reducing inventory, product development time, cycle time, and order lead time.