• Journal of Radiation Industry
• /
• v.6 no.1
• /
• pp.67-73
• /
• 2012

The development of radiation detection systems mainly consist of two parts-radiation detector fabrication including material development, and its appropriate electronics development. For the core-technology incubation of a radiation detection system, radiation fabrication and an evaluation facility are scheduled to be founded at the RFT (Radiation Fusion Technology) Center at KAERI (Korea Atomic Energy Research Institute) by 2015. This facility is utilized for the development and incubation of bottleneck-technologies to accelerate the industrialization of a radiation detection system in the industrial, medical, and radiation security fields. This facility is also utilized for researchers to develop next-generation radiation detection instruments. In this paper, the establishment of core-technology development is introduced and its technological mission is addressed.

• Journal of KIISE:Computer Systems and Theory
• /
• v.30 no.5_6
• /
• pp.299-306
• /
• 2003

This paper formulates a problem of embedded real-time system re-engineering, and presents its solution approach. Embedded system re-engineering is defined as a development task of meeting performance requirements newly imposed on a system after its hardware and software have been fully implemented. The performance requirements nay include a real-time throughput and an input-to-output latency. The proposed solution approach is based on a bottleneck analysis and nonlinear optimization. The inputs to the approach include a system design specified with a process network and a set of task graphs, task allocation and scheduling, and a new real-time throughput requirement specified as a system's period constraint. The solution approach works in two steps. In the first step, it determines bottleneck precesses in the process network via estimation of process latencies. In the second step, it derives a system of constraints with performance scaling factors of processing elements being variables. It then solves the constraints for the performance staling factors with an objective of minimizing the total hardware cost of the resultant system. These scaling factors suggest the minimal cost hardware upgrade to meet the new performance requirement. Since this approach does not modify carefully designed software structures, it helps reduce the re-engineering cycle.

• Journal of Korea Port Economic Association
• /
• v.21 no.4
• /
• pp.33-53
• /
• 2005

Kangwon Province has grown regional economy under the circumstances of poor resources compared with others and Kangwon Province is in a position to stress trade to continue economic development in future. Therefore this paper proposes that we must analyze the real situation and the patential factors of foreign trade in Kangwon Province. And also this paper is to propose a strategy for the promotion of foreign trade in Kangwon Province

• IE interfaces
• /
• v.12 no.3
• /
• pp.437-447
• /
• 1999

Modeling and system development for the fabrication process in the semiconductor manufacturing is presented in this paper. Maximization of wafer production can be achieved by the wafer flow balance under high utilization of bottleneck machines. Relatively simpler model is developed for the fabrication line by considering main characteristics of logistics. Simulation system is developed to evaluate the line performance such as balance rate, utilization, WIP amount and wafer production. Scheduling rules and input rules are suggested, and tested on the simulation system. We have shown that there exists good combination of scheduling and input rules.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.190-193
• /
• 1990

Die finishing (polishing and lapping) after NC machining is characterized as one bottleneck process for reducing lead time. For automation of this typical manual work, a flexible polishing tool system using industrial robot has been developed. This tool system has three principal functions in order to achieve reduction of waviness, 3 D.O.F. compliance and constant pressure structure. This polishing tool shows that adaptability to free form surface is increased and programmability to various areas of die surface is also acquired.

• Journal of the Korean Ceramic Society
• /
• v.46 no.2
• /
• pp.161-169
• /
• 2009

MLCC (Multi-layer Ceramic Capacitor) is the most important passive component in electronic devices such as HHP, PC and digital display. The development trend of MLCC is a miniaturization with increasing the capacitance. In this paper, a development history of the high capacitance MLCC in Korea was introduced, and the necessity of the finer $BaTiO_3$ was explained in the viewpoint of the issued electrical and dielectric properties of high capacitance MLCC. The bottleneck technologies to realize the high capacitance was shortly introduced, followed by the prediction of the development trend of MLCC in near future.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.444-447
• /
• 2005

Increasing competition is due to internationalization in market. This result requires various products in a rapid development of product. Die design is one of bottleneck areas in product development. It takes 40% of total time for whole car development. Therefore a new method should be developed as a fundament on which the design process of die can be carried out effectively. This can be realized by using modular design based on standard template. In this paper a modular design concept will be discussed.

• Korean Journal of Organic Agriculture
• /
• v.24 no.4
• /
• pp.609-625
• /
• 2016

This study was conducted to suggest implications of pest management system for agrarian improvement institute. We analyzed the informations about the pest management by listening to opinion of farmers and researchers including Rural Development Administration (RDA) and it's affliated organization. In result, They evaluated that the agriculture development institutes very well progressed pest management researches in principle. However, some chronic bottleneck problems still existed such as pesticides resistant pests, lack of effective control methods. For designing proper direction, these problems should be considerated preferently.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.33-34
• /
• 2006

The most bottleneck of development of automation excavator system is the making mathematical linear model. Because of non-linear of control circuit, cylinder, join in hydraulic circuit, and heavy loading so on. Therefore, whatever robust controller is designed, real experimentation is necessary. But, a real experimentation has many risks. The excavator is expensive and large size. Therefore a development of experimentation system is difficult and not safe. Specially, there have a difficulty, because of big noise. So, on experimentation is difficult in school. Manufacturing pneumatic excavator modeland using system identification, design a system transfer function in this paper. Also, planning m-PID Controller using CDM, and examining usefulness applied to actuality model.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1333-1337
• /
• 2003

The present headway on KNR lines varies from 6 to 10 minutes. Therefore, KNR would like to reduce the headway of all the lines by 4 minutes with the implementation of ERTMS/ETCS on-board system. In Korea, thanks to the operation of the High Speed Line in 2004, the bottleneck phenomenon will occur only in a few sections such as Seoul-Siheung, which will be the common route between KTX and conventional trains. Therefore, we will analyze expected braking distance and running time depending on characteristics of conventional passenger and freight trains and high speed train will be operated within electrified conventional line for comparing the headways of ATS trackside and ETRMS/ETCS on-board system within the Seoul-Siheung section.