• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.185.2-185.2
• /
• 2016

The plasma density is an essential plasma parameter describing plasma physics. Furthermore, it affects the throughput and uniformity of plasma processing (etching, deposition, ashing, etc). Therefore, a novel technique for plasma density measurement has been attracting considerable attention. Microwave probe is a promising diagnostic technique. Various type of cutoff, hairpin, impedance, transmission, and absorption probes have been developed and investigated. Recently, based on the basic type of probes, modified flat probe (curling and multipole probes), have been developing for in situ processing plasma monitoring. There is a need for comparative study between the probes. It can give some hints on choosing the reliable probe and application of the probes. In this presentation, we make attempt of numerical study of different kinds of microwave probes. Characteristics of frequency spectrum from probes were analyzed by using three-dimensional electromagnetic simulation. The plasma density, obtained from the spectrum, was compared with simulation input plasma density. The different microwave probe behavior with changes of plasma density, sheath and pressure were found. To confirm the result experimentally, we performed the comparative experiment between cutoff and hairpin probes. The sheath and collision effects are corrected for each probe. The results were reasonably interpreted based on the above simulation.

• 한국건축시공학회지
• /
• 제13권5호
• /
• pp.491-497
• /
• 2013

본 연구의 목적은 구조용 경량골재 콘크리트의 배합설계 절차를 확립하고, 설계강도로부터 콘크리트 목표 기건밀도의 범위를 평가하는 것이다. 본 절차를 확립하기 위해, 기존 347 실험데이터의 비선형 회귀분석 및 두 경계조건 (절대용적 및 콘크리트 기건밀도)에 기반한 수학적 모델을 구성하였다. 배합설계 모델제시 결과, 설계강도에 대한 물-시멘트비와 콘크리트 기건밀도는 굵은골재 체적비의 증가와 함께 감소하는데, 이 경향은 모래 경량보다는 전 경량골재 콘크리트에서 현저하였다. 경량골재 콘크리트의 기건단위는 설계강도에 따라 임의의 범위에서 설정되어야 하는데, 이는 제시된 모델에 의해 평가될 수 있다.

• 대한토목학회논문집
• /
• 제29권3B호
• /
• pp.231-237
• /
• 2009

본 연구에서는 2-방정식 난류모형인 ${\kappa}-{\varepsilon}$ 모형을 이용하여 2차원적으로 발달하는 하층 밀도류를 모의하기 위한 수치모형을 제시하였다. 타원형 편미분 방정식으로 흐름에 대한 지배방정식을 구성하였으며, 수치기법으로는 유한체적법을 사용하였다. 연구를 통해 개발된 수치모형을 기존의 실험결과와 비교하여 적용성을 검토하였다. 불연속 유입조건 밀도류의 시간별 진행에서 흐름의 불안정에 의한 와(渦)의 발생을 확인하였으며, 진행중인 불연속 유입 밀도류의 진행단계 변화와 선단부 속도의 관계를 살펴보았다. 또한, 무거운 유체 위로 이동하던 주변수체가 벽면을 접하면서 발생된 단파가 밀도류의 진행에 미치는 영향을 수직구조를 통해 살펴보았다. 한편, 개발된 모형을 이용한 수치모의에서 선단부의 진행 속도가 실험보다 느리게 모의되었다. 이는 3차원 현상인 난류의 불안정성을 모의하는 2차원 모형의 한계인 것으로 판단된다.

• Journal of Mechanical Science and Technology
• /
• 제17권11호
• /
• pp.1756-1766
• /
• 2003

Numerical modeling is carried out to investigate forced convective heat transfer to near-critical water in developing laminar flow through a circular tube. Due to large variations of thermo-physical properties such as density, specific heat, viscosity, and thermal conductivity near thermodynamic critical point, heat transfer characteristics show quite different behavior compared with pure forced convection. With flow acceleration along the tube unusual behavior of heat transfer coefficient and friction factor occurs when the fluid enthalpy passes through pseudocritical point of pressure in the tube. There is also a transition behavior from liquid-like phase to gas-like phase in the developing region. Numerical results with constant heat flux boundary conditions are obtained for reduced pressures from 1.09 to 1.99. Graphical results for velocity, temperature, and heat transfer coefficient with Stanton number are presented and analyzed.

• 한국생산제조학회지
• /
• 제22권2호
• /
• pp.241-247
• /
• 2013

The doctor blade is equipped in a toner cartridge and is a device to maintain the uniform thickness of a toner by controlling the pressure on the developing roller. The contact pressure between the developing roller and the doctor blade is one of the significant factors for image quality and durability of toner cartridge. The purpose of this study is to develop approximation model in order to minimize the time and cost which are needed much required in making optimal design of the doctor blade. Central composite design was used for the design of experiment and response surface design was used for approximation. The data for contact pressure were acquired through finite element analysis and data of image density and toner weight were acquired through experiment. The approximation model developed in this study has presented very high fitness.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.247-250
• /
• 2012

As industrialization progresses is rapidly growing, the city of density and temperature is rising successively. It leads to the status of environmental issues. It is needed to develop process of planting concrete block using by Eco-materials for replacing to he existing rooftop light soil that imported. In this study, developing the process of planting lightweight block is researched on using applications of 6 Sigma technique. It makes process object improve standard by using statistical method. Also, there are suggestion that it is optimum mix design conditions and affection of experimental factors in matters of developing planting concrete block for rooftop greening.

• 대한간호학회지
• /
• 제52권2호
• /
• pp.214-227
• /
• 2022

Purpose: This study was aimed at investigating the incidence and risk factors of dyslipidemia in menopausal women using a Korean community-based longitudinal study. Methods: The subjects were 245 postmenopausal women without dyslipidemia who had participated in the Ansan-Ansung cohort study from 2001~2002 (baseline) to 2015~2016 (seventh follow-up visit). The dyslipidemia incidence was measured as incidence proportion (%) and incidence rate per 100 person-years. The predictors of developing dyslipidemia were analyzed with Cox's proportional hazard model. Results: The incidence of new dyslipidemia during the follow-up period was 78.4% (192 patients), and 11.9 per 100 person-years. Mean duration from menopause to developing dyslipidemia was 5.3 years in new dyslipidemia cases. The triglyceride/high density lipoprotein (TG/HDL-C) ratio at baseline (hazard ratio = 2.20; 95% confidence interval = 1.39~3.48) was independently associated with developing dyslipidemia. Conclusion: Dyslipidemia occurs frequently in postmenopausal women, principally within five years after menopause. Therefore, steps must be taken to prevent dyslipidemia immediately after menopause, particularly in women with a high TG/HDL-C ratio at the start of menopause.

• 산업경영시스템학회지
• /
• 제20권44호
• /
• pp.163-169
• /
• 1997

Due to the increasing of the number of cars and bad road conditions, car accidens are increasing every you in Korea. When a person meets a car accident, it is necessary for him to analyze and determine whether applying insurance or not, because standard discount rate and special increasing rate change with accident types and the amount of accident expenditure. When we consider insurance rate that includes more then ten elements, we need a decision making, In this paper, S insurance company investigated previous car causers in 1988, 1989, 1990 to 1996 with 600,000 real data. We investigate probability density functions and cumulative distribution functions for each year using ARENA software. We can apply the results of this study to various accidents that occur under uncertainty in our life. I hope that this paper contribute to strengthening competitive power of companies and developing new insurance rate systems in future.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1269-1274
• /
• 2011

To cut down the maintenance expenses at branch lines, the foreign developed countries have developed the low-cost signalling on low-density lines. These examples are FFB(FunkFahrBetrieb) Radio based train operation by German railways(Deutsche Bahn AG), ERTMS REGIONAL by Europe and LOCOPROL system using a GPS. Also, Korea is developing Information and Communication Technology based low-cost signalling on low-density lines. The characteristics of this system are directly controled switch and crossing by driver. For the purpose of this paper, we reviewed the business process for switch and crossing control. Specially, we compared and analysed both methods whether the driver takes control over the operation procedures of switch or the control message is carried by the command of the controller. And by utilizing the instrument of UML, I planned the switch according to the control authority and the operation procedures needed for the control of crossing.

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2002년도 연료전지심포지움 2002논문집
• /
• pp.189-192
• /
• 2002

An analytical study on BMFCS was carried out by employing the computational fluid dynamics(CFD) method. In this study, the commercial CFD code Fluent(ver. 5.5) was used, and many assumptions were adopted to simplify the situation in the fuel cell. From the simulation, many valuable informations were obtained in terms of distributions of velocity, pressure, temperature, density and current density over the flow field. And thus, it was anticipated that the simulation results were very helpful in developing DMFCs by facilitate optimization of structures of electrodes and flow field of the separator.