• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.219-224
• /
• 2005

Developable surface plays an important role in computer aided design and manufacturing systems. This paper is concerned with improving the develop ability of mesh. Since subdivision is an efficient way to design complicated surface, we intend to improve the developability of the mesh obtained from Loop subdivision. The problem is formulated as a constrained optimization problem. The optimization is performed on the coordinates of the points of the mesh, together with the constraints of minimizing shape difference and maximizing developability, a developability improved mesh is obtained.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.15 no.2
• /
• pp.77-90
• /
• 1997

Positive type presensitized offset plate developer were blended by quantitative analysis method. The test had been proceeeded to check variation of developability, shelf life and tone reproduction by SiO2/Na2O ratio to PS plate developer, added glycerin, and sodium phosphate with glycerin. This study of tone reproduction had been tested 5 times to get accuracy by PS platesusing kodak CCG C-3, KMS. The test result of tone reproduction of presensitized offset plates can be summarized as follows ; major compositions in positive type plate developer were Na, Si, K and P, developability were increased by Sio2/NaO2 ratio in positive type plate developer. Shelf life can be kept by add glycerin to positive type plate developer. Tone reproduction were improved by sodium phosphate due to buffer action while shelf life can be kept by add glycerin in positive type plate developer.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.11 no.1
• /
• pp.85-101
• /
• 1993

Poly(vinyl cinnamate) had excellent resolution and no dark reaction and high etch resistent. But is was developed in polar solvent. A aqueous-photopolymer was synthesised for improvment of developability. Poly(vinyl cinnamoyl acetate)(PVCiA) and aqueous-PVCiA(PVCiA-s) was prepared and was characterized with H-NMR. The characteristic of sensitivity and developablity of coating was investigated by Grayscale method.

• Applied Chemistry for Engineering
• /
• v.23 no.2
• /
• pp.157-163
• /
• 2012

Using six kinds of epoxy acrylates and a conductive carbon black, photosensitive resistor pastes were fabricated and then their developability in alkaline aqueous solution and the resistance values after thermal curing were evaluated. In order to impart the photocurability by UV exposure and the developability on alkaline solution, epoxy acrylate oligomers with carboxyl group, acrylate monomers, a photoinitiator and so forth were used. In addition, an organic peroxide was added into the paste to get a thermally curable composition. As a result, some of the pastes were not developed depending on the kinds of oligomers and, in the developed pastes, the measured resistance showed the different values depending on their compositions, even though they contain the same amount of carbon black. Finally, the optimum oligomer was selected and then, by adjusting the amount of carbon black, the kind of monomer and the curing temperature, the photosensitive resistor paste composition which showed the sheet resistance of about 0.5 $k{\Omega}/sq.$ could be obtained.

• Korean Journal of Computational Design and Engineering
• /
• v.1 no.3
• /
• pp.189-202
• /
• 1996

Complex geometric shapes can be defined simply and efficiently by combining and operating various surface primitives. These primitives and their intersection curves are used in finite element mesh generation to form an easy and intuitive procedure for finite element modelling of curved surfaces. This paper proposes techniques of automatic mesh generation on surface primitives with arbitrarily shaped boundaries and control curves, which may be created by surface to surface intersection. A method of automatic mesh generation on plane, which was previously developed by the author, has been modified for application to the surface mesh generation. Owing to the mesh generation-wise differences between planes and surfaces, the surfaces should be transformed into conceptual plane so that the modified plane mesh generation method can be applied. Surface development, mapping and mesh reconstruction are the key techniques suggested in this paper. The selection of the technique to apply can be determined automatically on the basis of the developability, existence of singularity and other characteristics of the surfaces on which the mesh is to be generated. The suggested techniques were implemented into parts of mesh generation functions of the finite element software, MacTran. Their validity and practicality were manifested by the actual use of this software.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.5
• /
• pp.517-525
• /
• 2007

This paper presents how to approximate an optimal shape of roll bending process in the fabrication of a curved shell plate. The roll bending process usually makes the cylindrical or conic shape from an initial flat plate. It means that the final shape is developable or its surface representation has zero Gaussian curvature. The fabrication shape is important in order to find process parameters of roil bending. An optimal concept is used to determine the developable fabrication shape which is in the closest proximity to the design surface or the given shell plate and is subject to developability. The results and the efficiency of this algorithm are evaluated by applying to some shell plates. Furthermore, the fabrication shape will be fundamental information for other process parameters of roll bending such as the vertical displacement of the center roller and the rolling directions.

• Applied Chemistry for Engineering
• /
• v.20 no.6
• /
• pp.622-627
• /
• 2009

Using an alkali-solution developable photosensitive resin and a carbon black as a conductive filler, photo-patternable pastes for polymer thick film resistor were fabricated and evaluated. A photo solder resist (PSR), which is usually used as protecting layer of printed circuit board (PCB), was used as a photosensitive resin so that ultraviolet exposure and alkali-aqueous solution development of paste were possible. After fabricating the photosensitive polymer resistor paste, the electrical properties of thick film resistors were measured using PCB test boards. Sheet resistance was decreased with increasing amount of carbon black, but the developability was limited in excess loading of carbon black. The sheet resistance was also reduced by re-curing and the change rate was smaller in higher carbon black loading. Moreover, finely patterned meander-type thick film resistors were fabricated using photo-process and large resistance up to several tens of sheet resistance could be obtained in small area by this technique.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.4
• /
• pp.271-276
• /
• 2019

This study is about the effectiveness of Jahwal consulting. We analyzed 275 self-supporting participants of 58 self-supporting companies in eight wide-area self-supporting centers nationwide. After consulting by conducting a questionnaire before consulting, we conducted a questionnaire to analyze the differences. The measurement variables consisted of 3 variables and 6 subparameters. The top variables are interpersonal relationships, organizational systems, and self-help business will. The sub-elements are interaction, communication between members, horizontal leadership, organizational stability, personal suitability and developability. The questionnaire was analyzed using SPSS 21.0, frequency analysis, and t-test. The purpose of this study is to verify the effectiveness of consulting conducted by Jahwal institutions. For this reason, we developed a measurement scale, and analyzed changes before and after consulting using that scale. As a result of the analysis, it was found that self-help consulting is effective. It was also analyzed that there was mode significance in the analysis by gender, age, region and educational background.

• Research in Community and Public Health Nursing
• /
• v.10 no.2
• /
• pp.291-306
• /
• 1999

Health promotion has come to the fore through new concept approach in consequence of the increase of chronic diseases. increase of medical cost and social trend of putting more emphasis on the individual responsibility for health. Studies of health promotion can be classified into two types: one is micro intervention method which is mainly focused on modifying individual life style and the other. macro intervention method in which they put another emphasis on the environment the individual is surrounded. in addition to modifying individual life style. This study belongs to the later. This study aims to develop nursing activities and program it for the purpose of community health promotion. The process of the study can be briefed as follows: to draw out nursing contents to intervene for community health promotion: to promote community health to develop nursing action indicators; to develop nursing action indicators for the development of main nursing activities. And those developed nursing activities are programmed systematically. The community health promotion program is composed of a hierarchical structure with nursing process that the nurses are supposed to apply to perform professional nursing. the level of nursing perform. the main items of nursing process. health promotion nursing indicators. health promotion nursing activities. The conclusion of this study according to objectives are as follows. First. community health promotion contents at individual and community level are remained revised and complemented and those at organizational level are developed. The developed main contents of community health promotion nursing are as follows. 1) Revised individual level nursing contents: 35 items. 2) Developed organizational level nursing contents: 24 items. 3) Revised community level nursing contents: 36 items. Second. for the development of the health promotion nursing action indicators. principles were set up and applied as follows. 1. Developed indicators should be provided with such qualities as comprehensiveness. diversity. developability, availability. practicability. 2. Developed indicators should be provided with functional abilities to measure the conditions and changes in any phenomena or state. inspect the development of the states. control the implementing program. evaluate the result of program and grasp what nurses should do. 3. Developed indicators should be provided with relevance and sequence. 4. Developed indicators should be undergo inspections from the expert. The developed community health promotion action indicators developed in this study. observing above mentioned principles. are total 330 indicators of 95 items. Third. when the main nursing activities were developed for each nursing action indicator. five priciples were set up in accordance with each nursing action indicators to decide main nursing activities. Main nursing activities developed observing those principles. are total 1273. Forth. for the programming of the developed nursing activities. three principles were set up. 1. The nursing activities are systematized in line with (nursing process) (nursing client) (key items of nursing process) (nursing action indicators for health promotion) (nursing activities). 2. The program is constructed in downward and hierarchical order. 3. The program is constructed not in relation to same level activities but in relation to high and low level activities. The process step of programming of developed main health promotion nursing activities are; Step 1. The Developed nursing action indicators are classified into nursing process. Step 2. The main nursing activities are allocated per each nursing action indicators. Step 3. The statement of main nursing activities are inspected. Step 4. The items of main nursing activities allocated by a certain nursing action indicators are sequenced. taking into consideration the elaborateness of activity. the sequency of activity. familiarity of activity. the difficulty of activity. the interest of activity. the frequency of activity. Step 5. The whole developed program should undergo comprehensive and critical inspections.