• Current Optics and Photonics
• /
• 제6권5호
• /
• pp.463-472
• /
• 2022

At certain wavelengths, single-pixel imaging is considered to be a solution that can achieve high quality imaging and also reduce costs. However, achieving imaging of complex scenes is an overhead-intensive process for single-pixel imaging systems, so low efficiency and high consumption are the biggest obstacles to their practical application. Improving efficiency to reduce overhead is the solution to this problem. Salient object detection is usually used as a pre-processing step in computer vision tasks, mimicking human functions in complex natural scenes, to reduce overhead and improve efficiency by focusing on regions with a large amount of information. Therefore, in this paper, we explore the implementation of salient object detection based on single-pixel imaging after a single pixel, and propose a scheme to reconstruct images based on Fourier bases and use U²Net models for salient object detection.

• 로봇학회논문지
• /
• 제17권2호
• /
• pp.172-177
• /
• 2022

In general, detection robots using ultrasonic sensors are equipped with sensors to protrude outward or to contact objects. However, in the case of a screw-propelled robot that detects the inside of a reactor tendon duct, if the ultrasonic sensor protrudes to the outside, resistance due to grease is generated, and thus the propulsion efficiency is reduced. In order to increase the propulsion efficiency, the screw must be sharp, and the sharper the screw, the more difficult it is to apply a high-performance ultrasonic sensor, and the detection efficiency decreases. This paper proposes a screw shape-changing mechanism that can improve both propulsion efficiency and detection efficiency. This mechanism includes an overlapped helical ring (OHR) structure and a magnetic clutch system (MCS), and thus the shape of a screw may be changed to a compact size. As a result, the Screw-propelled robot with this mechanism can reduce the overall length by about 150 mm and change the shape of the screw faster and more accurately than a robot with a linear actuator.

• Journal of Animal Science and Technology
• /
• 제64권5호
• /
• pp.813-829
• /
• 2022

Internal and external defects of eggs should be detected to prevent cross-contamination of intact eggs by abnormal eggs during storage. Emerging detection technologies for abnormal eggs were introduced as an alternative to human inspection. The advanced technologies could rapidly detect abnormal eggs. Abnormal egg detection technologies using acoustic response, machine vision, and spectroscopy have been commercialized in the poultry industry. Non-destructive egg quality assessment methods meanwhile could preserve the value of eggs and improve detection efficiency. In order to improve detection efficiency, it is essential to select a proper algorithm for classifying the types of abnormal eggs. This review deals with the performance of the detection technologies for various types of abnormal eggs in recently published resources. In addition, the discriminant methods and detection algorithms of abnormal eggs reported in the published literature were investigated. Although the majority of the studies were conducted on a laboratory scale, the developed detection technologies for internal and external defects in eggs were technically feasible to obtain the excellent detection accuracy. To apply the developed detection technologies to the poultry industry, it is necessary to achieve the detection rates required from the industry.

• Journal of Radiation Protection and Research
• /
• 제26권4호
• /
• pp.393-398
• /
• 2001

매년 병원에서 사용 후 폐기되는 비가연성 폐기물은 ${\gamma}$-선과 ${\beta}$-선을 방출하지만 방사능은 주변방사능 수준으로 매우 낮다. 이를 측정하기 위한 기존의 방법은 비효율적이고 복잡하므로, 좀더 간단한 방법이 긴요하다. 본 논문에서는 측정 방사선의 특성상 핵종에 따라 다른 측정방법을 사용하였는데, ${\gamma}$-선 방출 핵종은 표준시료로부터 효율곡선식을 도출하여 미지의 방사능을 측정하였다 ${\beta}$-선 방출 핵종은 Monte Carlo 시뮬레이션을 통해 계측 효율을 예측하고 표면장벽형계측기로 측정하여 미지의 방사능 양을 결정하는 새로운 방법을 제시하였다. 연구결과에 의하면 이론적 계산치와 표면장벽형 계측기를 이용하면 전처리를 필요로하는 액체섬광계수기를 이용하지 않고 또한 계측효율을 결정하기 위한 비경제적인 표준시료 측정시험과정 없이도 저에너지 방사선을 약 17% 오차 범위내에서 결정할 수 있다고 판단된다.

• International Journal of Computer Science & Network Security
• /
• 제22권6호
• /
• pp.1-6
• /
• 2022

Scene change detection is an important topic because of the wide and growing range of its applications. Streaming services from many providers are increasing their capacity which causes the industry growth. The method for the scene change detection is described here and compared with the State-of-the-Art methods over the Open Video Scene Detection (OVSD) - an open dataset of Creative Commons licensed videos freely available for download and use to evaluate video scene detection algorithms. The proposed method is based on scene analysis using threshold values and smooth scene changes. A comparison of the presented method was conducted in this research. The obtained results demonstrated the high efficiency of the scene cut localization method proposed by authors, because its efficiency measured in terms of precision, recall, accuracy, and F-metrics score exceeds the best previously known results.

• Journal of Radiation Protection and Research
• /
• 제43권4호
• /
• pp.137-142
• /
• 2018

Background: Gamma-ray detectors having a thin window of a material with low atomic number can increase the true coincidence summing effects for radionuclides emitting X-rays or gamma-rays. This effect can make efficiency calibration or spectrum analysis more complicated. In this study, a Cu shield was tested as an X-ray filter to neglect the true coincidence summing effect by X-rays and gamma-rays in gamma-ray spectrometry, in order to simplify gamma-ray energy spectrum analysis. Materials and Methods: A Cu shield was designed and applied to an n-type high-purity germanium detector having an $X-{\gamma}$ summing effect during efficiency calibration. This was tested using a commercial, certified mixed gamma-ray source. The feasibility of a Cu shield was evaluated by comparing efficiency calibration results with and without the shield. Results and Discussion: In this study, the thickness of a Cu shield needed to avoid true coincidence summing effects due to $X-{\gamma}$ was tested and determined to be 1 mm, considering the detection efficiency desired for higher energy. As a result, the accuracy of the detection efficiency calibration was improved by more than 13% by reducing $X-{\gamma}$ summing. Conclusion: The $X-{\gamma}$ summing effect should be considered, along with ${\gamma}-{\gamma}$ summing, when a detection efficiency calibration is implemented and appropriate shielding material can be useful for simplifying analysis of the gamma-ray energy spectra.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권11호
• /
• pp.532-537
• /
• 2006

Lightning induced faults accounts for more than 66% at the transmission lines of KEPCO. The lightning causes damages to power system equipments including transmission line, the blackout of electricity and the electro-magnetic interference. Because of this reason, we need the real time lightning information for the optimal operation of power system. And, it is required to obtain and accumulate the lightning current parameters for the insulation design. In 2005, KEPRI constructed a lightning detection network, the KLDNet (i.e. Kepco Lightning Detection & Information System) and launched a lightning information service for KEPCO customers. It is intended to provide data service on the operation of transmission lines and collect lightning-related data, which is the most important factor regulating power system design and operation. The new system will replace LPATS, the old detection system, which has been operating since 1995 and is rapidly failing in terms of both detection performance and location accuracy. The purpose of this paper is to explain the work performed and the results of that work in performing a site survey of several locations. The purpose of the site survey is to find locations acceptable for the installation of a lightning location receiver in support of a Lightning detection system(LDS). A restriction was placed on the surveyed locations, as they must belong to the Korea Electric Power Company. This requirement was made to facilitate the communication needs of the LDS network. Total of 15 sites were evaluated as possible LDS sensor sites. Some of the sites were rejected for physical reasons and therefore no electrical testing was performed. Of the 15 sites, total of 10 sites were considered acceptable and 5 sites were rejected for various reason. In this paper, we would like to explain the site survey and detection efficiency for LDS.

• Nuclear Engineering and Technology
• /
• 제52권4호
• /
• pp.841-845
• /
• 2020

An airborne alpha beta detection system using passivated implanted planar silicon (PIPS) detector was modeled with the MCNP6 code and its resolution and detection efficiency were analyzed. Simulation of the resolution performed using the Gaussian energy broadening (GEB) function showed that the full width at half maximum (FWHM) of 35.214 keV for alpha particles was within 34-38 KeV, which is the FWHM range of the actual detector, and the FWHM of 15.1 keV for beta particles was constructed with a similar model to 17 keV, which is the FWHM range of an actual detector. In addition, the detection efficiency and the resolution were simulated according to the distance between the detector and the air filter. When the distance was decreased to 0.2 cm from 0.8 cm, the efficiency of the alpha and beta particles detection decreased from 5.33% to 4.89% and from 5.64% to 4.27%, respectively, and the FWHM of the alpha and beta particles improved from 40.9 KeV to 29.84 keV and 25.76 keV-13.27 keV, respectively.

• 전기전자학회논문지
• /
• 제18권4호
• /
• pp.456-462
• /
• 2014

본 연구는 방사선 검출용 플라스틱 섬광체 검출기의 검출효율을 높이기 위한 섬광체 연마에 관한 연구이다. 플라스틱 섬광체를 이용한 검출기를 제작하여 4단계의 연마 과정으로 섬광체 절단면에서 광손실을 감소시켰다. 이때 연마단계와 검출 효율에 대한 상관관계를 구하여 검출 특성을 평가하였다. 연마단계에 따른 검출 효율을 측정한 결과 연마하지 않은 섬광체와 비교하여 4단계의 연마 과정을 모두 연마한 섬광체를 이용한 검출기의 검출 효율이 최대 7.57배 증가하는 것을 확인하였고 각 단계 별로 연마한 섬광체를 이용하여 제작한 검출기에서도 방사선의 세기, 거리, 위치에 대한 검출 특성에서도 연마하지 않은 섬광체에 비하여 좋은 검출 특성을 보였다.

• Nuclear Engineering and Technology
• /
• 제52권12호
• /
• pp.2910-2917
• /
• 2020

Digital light processing three-dimensional (3D) printing technique is a powerful tool to rapidly manufacture plastic scintillators of almost any shape or geometric features. In our previous study, the main properties of light output and transmission were analyzed. However, a more detailed study of the other properties is required to develop 3D printed plastic scintillators with expectable and reproducible properties. The 3D printed plastic scintillator displayed an average decay time constants of 15.6 ns, intrinsic energy resolution of 13.2%, and intrinsic detection efficiency of 6.81% for 477 keV Compton electrons from the ¹³⁷Cs γ-ray source. The 3D printed plastic scintillator showed a similar decay time and intrinsic detection efficiency as that of a commercial plastic scintillator BC408. Furthermore, the presented estimates for the properties showed good agreement with the analyzed data.