• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.9
• /
• pp.1172-1178
• /
• 2018

A system that control computer presentations by using the hand motion recognition and identification is proposed. The system recognizes and identifies various types of motion in hand motion, controlls the presentation without additional control devices. To recognize hand movements, it performs a face and hand region detection. Facial area is detected using Haar classifier and hand region is extracted according to skin color information on HSV color model. The face area is used to determine the beginning and end of hand gestures, the size and direction of motion. It recognizes various hand gestures and uses them to control computer presentations according to the hand motion identification rules that are proposed and set horizontal and vertical axes from the face area. It is confirmed that 97.2% recognition rate is obtained in about 1200 hand motion recognition experiments and the proposed algorithm is valid in presentation control.

• Journal of Internet Computing and Services
• /
• v.8 no.4
• /
• pp.1-9
• /
• 2007

Decision fusion in wireless sensor networks under non-Gaussian noise channels is studied. To consider the tail behavior noise distributions, we use a exponentially-tailed distribution as a wide class of noise distributions. Based on a canonical parallel fusion model with fading and noise channels, the likelihood ratio(LR) based fusion rule is considered as an optimal fusion rule under Neyman-Pearson criterion. With both high and low signal-to-noise ratio (SNR) approximation to the optimal rule, we obtain several suboptimal fusion rules. and we propose a simple fusion rule that provides robust detection performance with a minimum prior information, Performance evaluation for several fusion rules is peformed through simulation. Simulation results show the robustness of the Proposed simple fusion rule.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2609-2614
• /
• 2015

National research and development projects institutions have implemented various measures in order to prevent R&D expenses abuse and negate enforcement. but it reveals a limit to prevent abuse of R&D expenses[1,2]. In this paper, to prevent abuses resulting from the R & D for the unusual trading post caught collecting information from the R & D phase implementation plan to detect unusual transactions. The results are subjective and research institutions, and specialized agencies to take advantage of shared, real-time cross-linkage between the credit card companies. Studies of data quality diagnostic techniques developed for this purpose related regulations and manuals, Q & A, FAQ, Outside-in business rules that derive from a variety of information, such as personnel interviews (Outside-In) was used for analysis.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.353-360
• /
• 2022

Due to the dense and complicated working environment, the construction industry is susceptible to many accidents. Worker's fall is a severe problem at the construction site, including falling into holes or openings because of the inadequate coverings as per the safety rules. During the construction or demolition of a building, openings and holes are formed in the floors and roofs. Many workers neglect to cover openings for ease of work while being aware of the risks of holes, openings, and gaps at heights. However, there are safety rules for worker safety; the holes and openings must be covered to prevent falls. The safety inspector typically examines it by visiting the construction site, which is time-consuming and requires safety manager efforts. Therefore, this study presented a worker-driven approach (the worker is involved in the reporting process) to facilitate safety managers by developing integrated computer vision and inertia sensors-based mobile applications to identify openings. The TensorFlow framework is used to design Convolutional Neural Network (CNN); the designed CNN is trained on a custom dataset for binary class openings and covered and deployed on an android smartphone. When an application captures an image, the device also extracts the accelerometer values to determine the inclination in parallel with the classification task of the device to predict the final output as floor (openings/ covered), wall (openings/covered), and roof (openings / covered). The proposed worker-driven approach will be extended with other case scenarios at the construction site.

• Korean Journal of Cognitive Science
• /
• v.12 no.3
• /
• pp.1-18
• /
• 2001

The goal of this paper is the pedagogical application of a Korean Spell/Grammar Checker to the web-based language learning system for Korean writing. To maximize the efficient instruction of our learning system \\`Urimal Baeumteo\\` we have to improve our Korean Spell/Grammar Checker. Today the NLP system\\`s performance defends on its semantic processing capability. In our Korean Spell/Grammar Checker. the tasks accomplished in the semantic level are: the detection and correction of misused derived and compound nouns in a Korean spell-checking device and the detection and correction of syntactic and semantic errors in a Korean grammars-checking device. We describe a common approach to the partial parsing using collocation rules based on the dependency grammar. To provide more detailed semantic rules. we classified nouns according to their concepts. and subcategorized verbs referring to their syntactic and semantic features. Improving a Korean Spell/Gl-Grammar Checker makes our learning system active and intelligent in a web-based environment. We acknowledge the flaws in our system: the classification of nouns based on their meanings and concepts is a time consuming task. the analytic unit of this study is principally limited to the phrases in a sentence therefore the accurate parsing of embedded sentences remains a difficult problem to solve. Concerning the web-based language learning system. it is critically important to consider its interface design and structure of its contents.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.5
• /
• pp.21-27
• /
• 2008

Despite recent studies on development of pulse diagnosis systems and needs for commercializing them, the reproducibility is one of the most controversial issues as ever. Because the pulse pressure value, which is one of the important parameters to evaluate reproducibility, is very vulnerable to moving artifacts, the reproducibility can not be obtained easily. In this paper, we suggested a moving artefacts detection system for a pulse diagnosis system so that a pulse diagnosis system can be robust to theses kinds of artefacts by excluding the contaminated parts from the pulse wave signal to be analyzed. This moving artifacts detection system was designed to consist of a three-axis accelerometer, an electromyography amplifier and a two-axis tilt sensor. To assess the suitability of the system, we examined the characteristics of each sensor's output signals with regard to the three specific motions such as extension, flexion and rotation. And, we also examined the each sensor's response to the high-frequency and low-frequency moving artifacts while the pulse wave signal was acquired from a pressure sensor for the pulse diagnosis. From these results, we could find that the response to subject's motions would be reflected in electromyography signal first, in accelerometer signals and in tilt sensor sequently. And, the facts that a stable pulse wave can be acquired in two seconds after high frequency or low frequency motions ended, were also found. Consequently, based on these findings, we set up some rules on the moving artifacts detection and designed an algorithm which is fit for our moving artifacts detection system.

• Journal of Internet Computing and Services
• /
• v.19 no.1
• /
• pp.1-10
• /
• 2018

Network threats such as Internet worms and computer viruses have been significantly increasing. In particular, APTs(Advanced Persistent Threats) and ransomwares become clever and complex. IDSes(Intrusion Detection Systems) have performed a key role as information security solutions during last few decades. To use an IDS effectively, IDS rules must be written properly. An IDS rule includes a key signature and is incorporated into an IDS. If so, the network threat containing the signature can be detected by the IDS while it is passing through the IDS. However, it is challenging to find a key signature for a specific network threat. We first need to analyze a network threat rigorously, and write a proper IDS rule based on the analysis result. If we use a signature that is common to benign and/or normal network traffic, we will observe a lot of false alarms. In this paper, we propose a scheme that analyzes a network threat and extracts key signatures corresponding to the threat. Specifically, our proposed scheme quantifies the degree of correspondence between a network threat and a signature using the LDA(Latent Dirichlet Allocation) algorithm. Obviously, a signature that has significant correspondence to the network threat can be utilized as an IDS rule for detection of the threat.

• Journal of the Society of Disaster Information
• /
• v.19 no.3
• /
• pp.498-509
• /
• 2023

Purpose: This paper proposes a method detecting the falling of a maintenance worker in the underground utility tunnel, by applying deep learning techniques using CCTV video, and evaluates the applicability of the proposed method to the worker monitoring of the utility tunnel. Method: Each rule was designed to detect the falling of a maintenance worker by using the inference results from pre-trained YOLOv5 and OpenPose models, respectively. The rules were then integrally applied to detect worker falls within the utility tunnel. Result: Although the worker presence and falling were detected by the proposed model, the inference results were dependent on both the distance between the worker and CCTV and the falling direction of the worker. Additionally, the falling detection system using YOLOv5 shows superior performance, due to its lower dependence on distance and fall direction, compared to the OpenPose-based. Consequently, results from the fall detection using the integrated dual deep learning model were dependent on the YOLOv5 detection performance. Conclusion: The proposed hybrid model shows detecting an abnormal worker in the utility tunnel but the improvement of the model was meaningless compared to the single model based YOLOv5 due to severe differences in detection performance between each deep learning model

• Journal of the Society of Disaster Information
• /
• v.20 no.2
• /
• pp.302-314
• /
• 2024

Purpose: This study proposes a fall detection model based on a top-down deep learning pose estimation model to automatically determine falls of multiple workers in an underground utility tunnel, and evaluates the performance of the proposed model. Method: A model is presented that combines fall discrimination rules with the results inferred from YOLOv8-pose, one of the top-down pose estimation models, and metrics of the model are evaluated for images of standing and falling two or fewer workers in the tunnel. The same process is also conducted for a bottom-up type of pose estimation model (OpenPose). In addition, due to dependency of the falling interference of the models on worker detection by YOLOv8-pose and OpenPose, metrics of the models for fall was not only investigated, but also for person. Result: For worker detection, both YOLOv8-pose and OpenPose models have F1-score of 0.88 and 0.71, respectively. However, for fall detection, the metrics were deteriorated to 0.71 and 0.23. The results of the OpenPose based model were due to partially detected worker body, and detected workers but fail to part them correctly. Conclusion: Use of top-down type of pose estimation models would be more effective way to detect fall of workers in the underground utility tunnel, with respect to joint recognition and partition between workers.

• Journal of Korea Multimedia Society
• /
• v.11 no.2
• /
• pp.143-152
• /
• 2008

Nowadays, many investigators are studying various methodologies concerning event expression for semantic retrieval of video data. However, most of the parts are still using annotation based retrieval that is defined into annotation of each data and content based retrieval using low-level features. So, we propose a method of creation of the motion unit and extracting event through the unit for the more semantic retrieval than existing methods. First, we classify motions by event unit. Second, we define semantic unit about classified motion of object. For using these to event extraction, we create rules that are able to match the low-level features, from which we are able to retrieve semantic event as a unit of video shot. For the evaluation of availability, we execute an experiment of extraction of semantic event in video image and get approximately 80% precision rate.