• 정보과학회 컴퓨팅의 실제 논문지
• /
• 제21권7호
• /
• pp.443-451
• /
• 2015

본 논문에서는 신호 모델링 기법을 이용하여 소총화기에서 발생하는 탄환충격파(SW, Shock Wave) 음향신호와 총성(MB, Muzzle Blast) 음향신호를 효과적으로 검출할 수 있는 알고리즘을 제안하였다. 전장에서 저격수의 위치를 탐지하기 위해서는 저격수의 소총화기에서 발생하는 탄환충격파와 총성 신호를 정확하게 검출하여 적 저격수의 방향각과 거리를 추정하는 것이 중요하다. 제안 알고리즘의 성능을 검증하기 위하여 국내 군 사격장에서 실제 소총화기 발사 실험을 진행하였고, 실험결과 제안 알고리즘은 탄환충격파 신호 검출에 있어 기존 알고리즘에 비해 최대 20% 가까운 성능향상을, 총성 신호 검출에 있어서는 약 5% 정도의 성능향상을 가져옴을 확인할 수 있었다.

• 대한전기학회논문지
• /
• 제36권6호
• /
• pp.430-436
• /
• 1987

A Detection filter that can be used for the Detection and Isolation of process faults is proposed by the use of fault vector modelling, and is applied to DC Motor fault detection. The proposed detection filter is a new one in a view point that its outputs are the estimates of fault variables(or linear combination of them) while all the existing filters estimate the state of process. By this properties, the process fault detection systems with this filter can be constructed in very simple structure. Besides the simplicity of structure and design procedure, the filter has an useful feature that various types of fault can be estimated via the filter by choosing appropriate fault models.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.1228-1233
• /
• 1990

This paper proposes a robust on-line fault detection method for uncertain systems. It is based on the fault detection method [10] accounting for modelling errors, which is shown to have superior performance over traditional methods but has some computational problems so that it is hard to be applied to on-line problems. The proposed method in this paper is an on-line version of the fault detection method suggested in [10]. Thus the method has the same detection performance robust to model uncertainties as that of [10]. Moreover, its computational burden is shown to be considerably lessened so that it is applicable to on-line fault detection problems.

• Structural Monitoring and Maintenance
• /
• 제10권1호
• /
• pp.63-86
• /
• 2023

Structural health monitoring and damage detection are essential for assessing, maintaining, and rehabilitating structures. Most of the existing damage detection approaches compare the current state structural response with the undamaged vibrational structural response, which is unsuitable for old and existing structures where undamaged vibrational responses are absent. One of the approaches for existing structures, numerical model updating/inverse modelling, available in the literature, is limited to numerical studies with high-end software. In this study, an attempt is made to study the effectiveness of the model updating technique, simplify modelling complexity, and economize its usability. The optimization-based detection problem is addressed by using programmable open-sourced code, OpenSees^® and a derivative-free optimization code, NOMAD^®. Modal analysis is used for damage identification of beam-like structures with several damage scenarios. The performance of the proposed methodology is validated both numerically and experimentally. The proposed method performs satisfactorily in identifying both locations and intensity of damage in structures.

• Journal of Electrical Engineering and Technology
• /
• 제12권6호
• /
• pp.2219-2226
• /
• 2017

This paper deals with artificial neural network approach for automatic detection of severity level of stator winding fault in induction motor. The problem is faced through modelling and simulation of induction motor with inter coil shorting in stator winding. The sum of the absolute values of difference in the peak values of phase currents from each half cycle has been chosen as the main input to the classifier. Sample values from workspace of Simulink model, which are verified with experiment setup practically, have been imported to neural network architecture. Consideration of a single input extracted from time domain simplifies and advances the fault detection technique. The output of the feed forward back propagation neural network classifies the short circuit fault level of the stator winding.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.120-124
• /
• 1991

In this paper, we consider the maneuvering detection and target tracking problem in uncertain linear discrete-time systems. The maneuvering detection is based on X$^{2}$ test[2,71, where Kalman filters have been utilized so far. The target tracking is performed by the maneuvering input compensation based on a maximum likelihood estimator. KF has been known to diverge when some modelling errors exist and fail to detect the maneuvering and to track the target in uncertain systems. Thus this paper adopt the FIR filter[l], which is known to be robust to modelling errors, for maneuvering detection and target tracking problem. Various computer simulations show the superior performance of the FIR filter in this problem.

• 대한전자공학회논문지
• /
• 제27권10호
• /
• pp.60-67
• /
• 1990

이 논문은 비선혀성, 모델링오차 그리고 잡음입력이 존재하는 선형 및 비선형시스템에서의 모델에 근거한 이상검출방법을 제시한다. 대상 시스템은 연속형이나 이산형 모두에 적용할 수 있도록 통합연산자$(unified operator)^[5]$로써 표시한다. 이 논문에서 제시되는 이상검출법은 잡음과 모델의 부정합과 비선형성을 고려한 것이다. 모델링 오차는 더하기꼴로 나타내며 계수추정에서 불확실성의 한계를 정량화시키기 위해 공칭모델 분모는 사건실험을 통해 고정시키는 것으로 한다. 공칭모델의 분자 계수들은 최소자승법으로 추정한다. 컴퓨터 모의실험을 추정하여 이 논문에서 제시한 방법이 기존의 방법보다 우수한 성능을 지니고 있음을 보인다.

• Journal of electromagnetic engineering and science
• /
• 제16권3호
• /
• pp.182-190
• /
• 2016

The problem of resolution in antenna ground-penetrating radar (GPR) is very important for the investigation and detection of buried targets. We should solve this problem with software or a numeric method. The purposes of this paper are the modelling and simulation resolution of antenna radar GPR using three antennas, arrays (as in the software REFLEXW), the antenna dipole (as in GprMax2D), and a bow-tie antenna (as in the experimental results). The numeric code has been developed for study resolution antennas by scattered electric fields in mode B-scan. Three frequency antennas (500, 800, and 1,000 MHz) have been used in this work. The simulation results were compared with experimental results obtained by Rial and colleagues under the same conditions.

• 전기학회논문지
• /
• 제61권7호
• /
• pp.937-943
• /
• 2012

Most of faults occurred in transmission lines are single-phase to ground faults and transient faults. Single-phase auto reclosing is an appropriate scheme to maintain the system stability and restore the system effectively when those faults are occurred. In single-phase auto reclosing scheme, the secondary arc is generated after faulted phase is tripped to eliminate the fault and it is sustained by the capacitive and inductive coupling to the healthy phases. It is important to reclose the faulted phase after fully extinction of secondary arc because of the damage applied to system. Therefore, it is necessary to research on the detection of secondary arc extinction to ensure high success rate of reclosing. In this step, firstly, the accurate modelling of secondary arc should be performed. In this paper, the modelling of secondary arc is performed by using EMTP-RV and the simulation results show that the implemented model is correct and effective.

• 대한원격탐사학회지
• /
• 제35권1호
• /
• pp.137-149
• /
• 2019

Traffic emissions are the main cause of environmental pollution in cities and respiratory problems amongst people. This study developed a model based on an integration of support vector regression (SVR) algorithm and geographic information system (GIS) to map traffic carbon monoxide (CO) concentrations and produce prediction maps from micro level to macro level at a particular time gap in a day in a very densely populated area (Utara-Selatan Expressway-NKVE, Kuala Lumpur, Malaysia). The proposed model comprised two models: the first model was implemented to estimate traffic CO concentrations using the SVR model, and the second model was applied to create prediction maps at different times a day using the GIS approach. The parameters for analysis were collected from field survey and remote sensing data sources such as very-high-resolution aerial photos and light detection and ranging point clouds. The correlation coefficient was 0.97, the mean absolute error was 1.401 ppm and the root mean square error was 2.45 ppm. The proposed models can be effectively implemented as decision-making tools to find a suitable solution for mitigating traffic jams near tollgates, highways and road networks.