• 한국산업융합학회 논문집
• /
• 제24권3호
• /
• pp.307-313
• /
• 2021

In this study, the comparative analysis, among the design standard value of distribution power, the calculated value from the measurement data of strand and the empirical data of the distribution line itself, have been performed for the elastic coefficients and linear expansion coefficients of distribution line conductors. The empirical values of elastic coefficients were lower about 10.6%(892kgf/mm²) than those of the design standard value of the distribution power and there were a little difference between the empirical values of linear expansion coefficients and the design standard value of the distribution power. From the above results, it could be concluded that the empirical values of conductor characteristics should be used in the dip design and installation of distribution line.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제4권3호
• /
• pp.300-305
• /
• 2004

This paper concerns controller design for the Takagi-Sugeno (TS) fuzzy systems. The design method proposed in this paper is derived in the framework of the optimal control theory utilizing the piecewise quadratic optimal value functions. The major part of the proposed design procedure consists of solving linear matrix inequalities (LMIs). Since LMIs can be solved efficiently within a given tolerance by the recently developed interior point methods, the design procedure of this paper is useful in practice. A design example is given to illustrate the applicability of the proposed method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1995년도 Proceedings of the Korea Automation Control Conference, 10th (KACC); Seoul, Korea; 23-25 Oct. 1995
• /
• pp.332-335
• /
• 1995

A simple and effective method for improving Euclidean norm condition number for chemical processing system is presented. The singular value sensitivities of Freudenberg et al. (1982) is used to estimate the behavior of singular values of process transfer function matrix when design parameter is changed, then the condition number can be calculated straightforwardly. The method requires explicit dependencies of each transfer function matrix elements on design parameters. These dependencies can be obtained either by symbolic differentiation in the form of explicit function of design parameters, or by numerical perturbation studies for units with large and complicated models. Gerschgorin-type lower bound for minimum singular value is introduced to detect the large divergencies near singular point due to linearity of sensitivities. The case studies are performed to show the efficiency of the proposed method.

• 한국지진공학회논문집
• /
• 제27권4호
• /
• pp.187-192
• /
• 2023

An elastic bearing must be strong against vertical loads and flexible against horizontal loads. However, due to the material characteristics of rubber, it may show variability due to the manufacturing process and environmental factors. If the value applied in the bridge design stage and the actual measured value have different values or if the performance during operation changes, the performance required in the design stage may not be achieved. In this paper, the seismic response of bridges was compared and analyzed by assuming a case where quality deviation occurs during construction compared to the design value for elastic bearings, which have not only always served as traditional bearings but also have had many applications in recent seismic reinforcement. The bearing's vertical stiffness and shear stiffness deviation were considered separately for the quality deviation. In order to investigate the seismic response, a time history analysis was performed using artificial seismic waves. The results confirmed that the change in the bearing's shear stiffness affects the natural period and response of the structure.

• 한국건설관리학회논문집
• /
• 제7권1호
• /
• pp.55-63
• /
• 2006

건설프로젝트에서 설계VE는 그 적용효과가 크므로 체계적 절차에 따른 분석이 요구되며, 그 중 가장 중요한 부분은 우수한 아이디어를 창출하기 위한 창조 단계이다. 하지만 현행 아이디어 창출 방법인 브레인스토밍, 델파이 등을 비롯한 기법들은 아이디어 창출에 많은 시간이 소요되고 우수한 아이디어를 고안한다는 것이 쉽지가 않다. 이는 설계VE에 참가하는 대부분의 전문가들이 아이디 어 창출의 효율성이 떨어지는 방법으로 접근하는데 그 원인이 있는 것으로 판단된다. 이에 본 연구에서는 VE의 효율적 수행을 위한 방법으로 창의적 아이디어 발상기법인 ASIT(Advanced Systematic Inventive Thinking) 적용을 제안하고자 한다. ASIT는 아이디어 고안을 체계적 절차에 따라 수행하도록 지원하여 단기간에 효과적 아이디어를 창출하는데 기여할 것으로 판단된다.

• 공학기술논문지
• /
• 제11권4호
• /
• pp.287-294
• /
• 2018

Since its introduction in Korea, design VE has widely been used as a means to enhance values in the construction industry. However, a greater emphasis is still placed on cost reduction in approach attitudes and performance evaluations on the implementation of design VE. In this regard, this study presented a performance evaluation method for cost, function, and value of VE proposals. Numerical criteria on the increase and decrease of cost and function that can classify the value enhancement type of VE proposals were proposed based on the performance evaluation method. It is expected that the use of numerical criteria for the type classification of VE proposal, and cost and performance evaluation method proposed in this study will make it possible to conduct a clear and more intuitive evaluation of VE proposal. However, it is appropriate to use the numerical criteria as a guideline to apply the new performance evaluation method for VE proposals. Therefore, it is necessary to conduct a statistical analysis with a wider range of users after the repeated application of the findings of this study, and thus to carry out research for presenting the numerical criteria for various types of users.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2006년도 정기학술발표대회 논문집
• /
• pp.271-273
• /
• 2006

건설 VE는 실시시기가 빠를수록 가치향상의 효과가 크므로 시공단계보다는 설계단계의 VE가 더욱 더 중요하다. 그러나 설계단계에서 발생하는 여러 가지 문제점으로 인하여 시공단계에 악영향을 미치고 있으며, 사업주체간에도 갈등을 야기하고 있다. 그러므로 설계단계에서의 품질확보가 무엇보다도 중요하다. 이에 본 연구는 설계단계의 연약지반처리공법 선정과정에서 VE/LCC 분석 사례를 통하여 비교공법별 설계기능점수(F)와 LCC비용(C)의 대비를 통해 가치지수(V)를 산정하여 최적의 공법을 선정함으로써 정성적인 판단을 정량적인 값으로 도출하는 과정을 수행하였으므로 앞으로 더욱 더 설계 VE의 확대방안이 필요함을 강조하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.869-872
• /
• 2005

This research studied robust design of column part for LCD transfer system. $1^{st}$ DOE(Design of Experiment)was conducted to find out main effect factors. 36 experiments were performed and their results were shows that the geometric parameters(Low-length, Side-length, Upper-thickness, Middle-thickness)are more important than other factors. The main effect plots shows that the maximum deflection of column is minimized with increasing Low-length, Side-length, under-thickness and Middle-thickness. $2^{nd}$ DOE was conducted to obtain RMS(Response Surface Method)equation 25 experiments were conducted. The CCD(Central Composite Design)technique with four factors were used. The coefficient of determination $(R^2)$ for the calculated RSM equation was 0.986. Optimum design was conducted using the RSM equation Multi-island genetic algorithm was used to optimum design. Optimum value for Low-length. Side-length, Upper-thickness and Middle-thickness were 299.8mm, 180.3mm, 21.7mm, 21.9mm respectively. An approximate value of 5.054mm in deflection was expected to be a maximum under the optimum conditions. Six sigma robust design was conducted to find out guideline for control range of design parameter. To acquire six sigma level reliability, the standard deviation of design parameter should be controlled within 2% of average design value.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.395-396
• /
• 2006

This paper presents the optimal design of Robot-Arm part use Design of Experiment(DOE). The DOE(Design of Experiment)was conducted to find out main effect factors for design of Robot-Arm part. In this design of Robot-Arm, 5 control factors include numbers of 4 level are selected and we make out L16 orthogonal array. Using this orthogonal array, find out optimal value and main effect factors of object function for design of Robot-Arm part by 16 times of test. We evidence this optimal value by using CATIA V5 Analysis.

• 한국멀티미디어학회논문지
• /
• 제21권6호
• /
• pp.685-697
• /
• 2018

(Most companies that perform BPR have not achieved satisfactory results or have not performed successful BPRs. There are many reasons for this, but the most important one has caused problems that do not accurately reflect the requirements of various stakeholders. In this paper, we will apply the BPR consulting methodology to a new value innovation requirements engineering process based on the Blue Ocean strategy, which is a way to create a new market without competition by customerizing potential customers by satisfying new customer expectations and needs. This paper uses a requirements engineering process that can generate customer value by applying the ERRC(Erasure Reduce Raise Create) analysis method, which is the core of the Blue Ocean Strategy Framework[1,2]. We will also apply the Six Sigma DFSS (Design For Six Sigma) methodology to improve quality and process through quantitative and systematic analysis. The proposed approach was presented to the BPR consulting to present a practical case, and the results of the empirical analysis of the system user to validate the results of BPR consulting.