• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1994년도 가을 학술발표회 논문집
• /
• pp.137-144
• /
• 1994

This study describes an application of a knowledge-based system for a part of the development of an integrated structural design system. In preliminary structural design procedure, most structural design operation are performed by structural engineer's manual method. These lack of systematic operation hampers the effective system integration. By introducing expert system to the structural planning stage, structural engineer can automate structural Planning process of an integrated structural design system for complex design. Engineering data management is receiving increasing attention due to complexity of information necessary for performing structural engineering operations. So, in this paper, we describe a methodology for automating conceptual structural design and developing a knowledge-based system integrated with database. At the end, we use an implemented example to support our methodology.

• 국제초고층학회논문집
• /
• 제4권4호
• /
• pp.227-239
• /
• 2015

This paper discusses the design parameters that are required for the design of high-rise building foundations, and suggests that the method of assessment for these parameters should be consistent with the level of complexity involved for various stages in the design process. Requirements for effective ground investigation are discussed, together with relevant in-situ and laboratory test techniques for deriving the necessary strength and stiffness parameters. Some empirical correlations are also presented to assist in the early stages of design, and to act as a check for parameters that are deduced from more detailed testing. Pile load testing is then discussed and a method of interpreting bi-directional tests to obtain pile design parameters is outlined. Examples of the application of the assessment process are described, including high-rise projects in Dubai and Saudi Arabia.

• 한국공작기계학회논문집
• /
• 제10권3호
• /
• pp.50-54
• /
• 2001

Manufacturing is characterized by increasing product variety and technical complexity, decreasing levels of demand, expanding global competition and declining profitability of organizations. To survive in such a complex environment, development of the automatic design system into design and manufacturing can be introduced to increase the flexibility and adaptability to markets. This paper presents the development of an automatic water-gate design system that composed of a main program and three modules, and was programmed by AutoLISP language under AutoCAD system. The devel-oped system is capable of generating water-gate design automatically according to input data as customer requirement.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1098-1100
• /
• 2005

The floorplanning problem is an essential design step in VLSI layout design and it is how to place rectangular modules as density as possible. And then, as the DSM advances, the VLSI chip becomes more congested even though more metal layers are used for routing. Usually, a VLSI chip includes several buses. As design increases in complexity, bus routing becomes a heavy task. To ease bus routing and avoid unnecessary iterations in physical design, we need to consider bus planning in early floorplanning stage. In this paper, we propose a floorplanning method for topological constraint consisting of bus constraint and memory constraint. The proposed algorithms based on Genetic Algorithm(GA) is adopted a sequence pair. For selection control, new objective functions are introduced for topological constraint. Studies on floor planning and cell placement have been reported as being applications of GA to the LSI layout problem. However, no studies have ever seen the effect of applying GA in consideration of topological constraint. Experimental results show improvement of bus and memory constraint.

• 한국CDE학회논문집
• /
• 제17권4호
• /
• pp.246-252
• /
• 2012

The piping route of hydraulic hose is designed with avoiding interferences to surrounding components. However, in a real practice, the piping route is mostly decided with an expert's experiences on site due to the complexity of design. Thus, this paper proposes a design methodology of the optimized route of a hose. We use NURBS representation to describe the piping route, which is possible to be locally modified, and an energy minimization method is applied to avoid interferences to the surroundings. In other words, the NURBS curve describing a piping route is modified to meet the desired positions from minimizing the perturbation of the control points, and the strain energy of the curve is then optimized to make the curve natural. The proposed method is implemented and its feasibility is validated using the commercial CAD software, CATIA V5.

• 전자공학회논문지C
• /
• 제35C권7호
• /
• pp.20-29
• /
• 1998

As the packing density of ICs in recent submicron IC design increases, interconnects gain importance. Because interconnects directly affect on two major components of circuit performance, power dissipation and operating speed, circuit engineers are concerned with the optimal design of interconnects and the aid tool to design them. When circuit models of interconnects are given (including geometry and material information), the analysis process for the given structure is not an easy task, but conversely, it is much more difficult to design an interconnect structure with given circuit characteristics. This paper focuses on the latter process that has not been foucsed on much till now due to the complexity of the problem, and prsents a design aid tool(DATOIS) to synthesize interconnects. this tool stroes the circuit performance parameters for normalized interconnect geometries, and has two oeprational modes:analysis mode and synthesis mode. In the analysis mode, circuit performance parameters are obtained by searching the internal database for a given geometry and interpolates results if necessary . In thesynthesis mode, when a given circuit performance parameter satisfies a set of geometry condition in the database, those geometry structures are printed out.

• 한국자동차공학회논문집
• /
• 제3권2호
• /
• pp.62-76
• /
• 1995

The safety analysis becomes very essential in the crash environment with the growth of automobile industry. Recently, an airbag system is required to protect the occupant. The effects of an airbag can be evaluated exactly from the barrier or sled test which is quite expensive. The airbag system in a passenger car is analyzed with the occupant analysis program. The modeling of the passenger car including an airbag is established and the results are verified by comparisons with real crash tests. However, the solution of an airbag design can not be obtained easily with the conventional method such as an optimization due to the nonlinearity and complexity of the problem. An iterative design algorithm using the orthogonal array is proposed to overcome the difficulties. The design trend of an airbag is recommended to minimize the injury of an occupant with the proposed design algorithm and the results are discussed.

• 한국주거학회논문집
• /
• 제15권2호
• /
• pp.35-42
• /
• 2004

This study is to investigate the various concepts of ecology for developing the perspectives and approaching guidelines to the ecological building design. The concepts of ecology may be some background to the environmental issues within architecture. While there are many words which mean environmentally-friendly architecture, ecological building design to which I refer here is the ecocentric and holistic design rather than the anthropocentric and mechanical one. Ecological and social systems are open, interacting, and unpredictable. So we should leave room within our planning of architectural project and in construction of new housing development for nature's unpredictable events. The approach to ecological building design might be the holistic perspectives, the respect of place and participation of people, to admit the complexity and diversity. The world in which we are living is highly unstable.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2005년도 춘계학술발표대회 논문집
• /
• pp.241-242
• /
• 2005

Due to the change in modern lifestyle and social pattern, food service industry has steadily grown recently. Especially, in terms of familiarity, chinese restaurant can be most popular type of dining alternative to Korean. The project was aiming to establish a new branch of the existing restaurant which has a main location in Kangnam area and has been famous for it's food quality, kind services and good interior design. This restaurant is located in Seohyoun-Dong, Bundang-Gu, Kyoungki-Do and this area is very crowded by both residential apartments and commercial offices. Considering the complexity in regional characteristics, this restaurant has basically targeted frequent dining-out family groups. In addition, the floor design was flexibly developed to be able to accomodate large office dining customers. The overall design was intended to keep very elegant and simple atmosphere, developed to express eco-friendly image by adopting the 'Water' component in the floor plan.

• International journal of advanced smart convergence
• /
• 제10권3호
• /
• pp.89-96
• /
• 2021

In various areas of the 4th industry, a big issue is software quality enhancement for stability and reliability of the smart software systems. After revising software promotion law at 2020, we must clearly define requirements and separate design parts and implementation parts of an all public software development contracts. In this study, we need to validate whether the final implementation of software is followed by the original design or not. To do this, we consider the design restoration through software visualization based on reverse engineering. Therefore we propose an UML design extraction and visualization method based on reverse engineering. Based on this, we may validate whether it is implemented according to the original design, and how much visualizes and includes the code the internal complexity for improvement of software quality.