• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.83-89
• /
• 2005

Rubber spring is used in primary suspension system for railway vehicle. This rubber spring has function which reduce vibration and noise, support the load carried in operation of rail vehicle. The non-linear properties of rubber which are described as strain energy function are important parameter to design and evaluate of rubber components. These are determined by material tests which are tension, compression and shear test. The behaviors of load-displacement of rubber spring for rail vehicle are evaluated by using commercial FEA code. It is shown that the results by FEA simulations are in close agreement with the test results

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.686-691
• /
• 2007

The ride comfort is more important according to train speedup. Generally it is defined as the vehicle vibration. There are many studies on evaluation method of ride comfort for railway. In the case of Korean high speed train(HSR 350x), the ride comfort has been assessed by statistical method according to UIC 513R. To verify the design requirements for the performance of HSR 350x, the qualification tests had been conducted from August 19, 2002 to December 2004 and the stabilization and reliability tests are carried out nowadays. Up to December 2006, total test runs and the accumulated milage of the train were 357 times and 164,000km, respectively. A total of 352 ride indices had been acquired through the on-line test from Aug. 2002 to Dec. 2006. In this paper, we have reviewed the characteristics of ride comfort for HSR 350x according to the operational conditions, such as load and track conditions, season and used time, by using the tests data.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1821-1828
• /
• 2010

In this study we suggest a method of optimization of verification hierarchy structure and system requirements management by using a verification matrix with traceability consideration. Verification items were gathered in the process of CDR(Critical Design Review), and analyzed with respect to requirements traceability structure. Missed or overlapped items were adjusted, and cross-correlated items between sub-systems were clustered and rearranged in order to structurize verification requrements (VRs). Those VRs are to be used as a guideline for the test and evaluation planning, development of test items and procedure, and system requirements management throughout the system integration stages.

• Journal of Korean Association for Spatial Structures
• /
• v.17 no.4
• /
• pp.77-84
• /
• 2017

As an alternative to coupling beam in shear wall system, application of the damper which can dissipate energy is increasing. In this study, lintel beam type steel damper which is simple to construct and change depending on design load was proposed. Cyclic loading test was conducted to compare reinforced concrete coupling beam and lintel beam type steel damper. The test results showed that lintel beam type steel damper has higher initial stiffness and energy dissipation capacity than reinforced concrete coupling beam.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.10a
• /
• pp.261-264
• /
• 2000

Two hull forms of 2, 500 TEU Container Vessel, designed by Daedong Shipbuilding CO., LTD. were tested at the Circulating Water Channel of Chosun University for the evaluation of resistance performance. The test results of resistance, wave profile measurement and trim-sinkage measurement are compared in the form of diagrams and figures, and the results are discussed. A conclusion is drawn that the performance of modified form (model number : CU-201F2A2) is improved about 8% resistance performance at the design speed compare with original form (model number : CU-201F1A1).

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.7
• /
• pp.1074-1080
• /
• 2015

In the last decades, the increasing interest in unmanned aerial vehicle(UAV) for military, surveillance, and rescue applications made necessary the development of flight control theory and body structure more and more efficient and fast. In this paper, we describe the design and performance of a prototype hexarotor UAV platform featuring an inertial measurement unit(IMU) based autonomous-flying for use in bluetooth communication environments. The proposed system comprises the construction of the test hexarotor platform, the implementation of an IMU, dynamic modeling and simulation in the hexarotor helicopter. Furthermore, the hexarotor helicopter with implemented IMU is connected with a micro controller unit(ARM-cortex) board. The P-PD control algorithm was used to control the hexarotor. We used the Matlab software to help us to tune the P-PD control parameters for quick response and minimizing the fluctuation. The control simulation and experiment on the real system are implemented in the test platform, evaluated and compared against each other.

• Journal of the Korean Home Economics Association
• /
• v.44 no.1 s.215
• /
• pp.47-58
• /
• 2006

The purposes of this research were to evaluate the effects of the sex education program on sexual knowledge and sexual attitude, and to provide fundamental information on sex education for middle school students. The research design was comparison and experimental groups including pre-test and post-test. The study subjects were 160 male middle school students in Pusan: 80 students of the experimental group and 80 students of the comparison group. The experimental group showed the significant differences from the comparison group in terms of sexual knowledge and sexual attitude. Through formative evaluation, students recognized human sexuality, especially in the areas of physical change, psychological change, dating, sexual drives and sexual violence. This sexual education program was designed with literature review and participated students' requests.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.286-291
• /
• 2000

The finite element analyses of mechanical rubber components are executed to predict the behavior of deformation and stress distribution in destgn step. The non-linear properties of rubber which are described as strain energy functions are important parameters to design and evaluate rubber components. These are determined by material tests which are tension, compression and shear test. The behaviors of loads-displacements of rubber components such as a roll tubber spring and resilient ring and additional spring for railway suspension system are evaluated by using commercial FEA code. It is shown that the results by FEA simulations are in close agreement with the test results.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.3
• /
• pp.127-131
• /
• 2006

Existing orthopedic implants such as pedicle screw and spinal cage were designed to fix the spinal structure. But, nowadays, physicians want to rehabilitate there original functions. To achieve this request, we studied micro-movable structure for interspinous. As a first step, we designed interspinous structure by 3D CAD to join each spinous processes. Next, we simulate it with various factors such as the thickness of micro-movement structure and the design of clip. At last, we performed static compressive test to satisfy the failure load of 339N and dynamic endurance test of 1.2M cycle. As a result, we developed interspinous implant and did several surgery to evaluated its satisfaction.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2004.04a
• /
• pp.255-260
• /
• 2004

IEC 60300 series, the international standards on dependability management system are newly developed and introduced rapidly worldwide. In order to meet this situation, it is necessary to apply them to the Korean industries effectively. This requires for us to prepare in advance for the introduction of the certification system of IEC 60300. It includes the establishment of the infrastructure such as documentation of Korean Standards, introduction of test equipments and test manuals, recognition of the certification body and training of specialists etc. This paper addresses the first step for the Introduction of IEC 60300. It includes the necessity of introduction of the system, general requirements and procedures for the certification of the industries, sampling methods design and establishment of the dependability assurance system of the materials.