• 전기전자학회논문지
• /
• 제27권1호
• /
• pp.71-77
• /
• 2023

본 논문에서는 실내 무선랜 환경에서 인접한 동작 주파수 스펙트럼을 가진 외부 간섭신호를 차단하기 위해 Wi-Fi 6E 시스템에 적용할 수 있는 이중대역 차단 주파수 선택표면을 설계하였다. 제안한 주파수 선택적 표면 구조는 2.4GHz 대역과 6GHz 대역에서 주파수 차단 특성을 가지며, 변형된 교차 쌍극자 구조와 단위 구조간 서로 맞물린 퍼즐 형태를 통해 구현되었다. 제안한 구조는 입사각과 편파에 대해 안정적인 주파수 응답 특성을 갖도록 설계되었으며, 제작 및 실험으로부터 0°~45°의 입사파에 대해 시뮬레이션에서 얻은 결과와 잘 일치하는 것을 확인하였다.

• Nuclear Engineering and Technology
• /
• 제55권6호
• /
• pp.1999-2010
• /
• 2023

Undesirable flapping motion of discs can cause the failure of swing check valves in nuclear passive safety systems. Time-resolved particle image velocimetry (PIV) was employed to investigate the flow characteristics around a free-to-rotate plate and the motion response, with the Reynolds numbers, based on the hydraulic diameter of the channel, from 1.32 × 10⁴ to 3.95 × 10⁴. Appreciable flapping motion (±3.52°) appeared at the Reynolds number of 2.6 × 10⁴ with the frequency of 5.08 Hz. In the low-Reynolds-number case, the plate showed negligible flapping. In the high-Reynolds-number case, the deflection angle increased with reduced flapping amplitude. The torque from the fluid determined the flapping amplitude. In the low-Reynolds-number case, Karman vortices were absent. With increasing Reynolds numbers, Karman vortices developed behind the plate with larger deflection angles. Strong interaction between the wake flow from the leading and trailing edge of the plate was observed. Based on power spectrum density (PSD) analysis, the vortex shedding frequency coincided with the flapping frequency, and the amplitude was positively correlated to the strength of the vortices. Proper orthogonal decomposition (POD) modes evince that, in the case of appreciable motion, coherent structures exhibited a larger spatial scale, enhancing the magnitude of the external torque on the plate.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1991년도 가을 학술발표회 논문집
• /
• pp.111-114
• /
• 1991

The KMRR 4-wheel crane which has a span of 30.6m long shall be designed to maintain its structural integrity during and after seismic shocks. Horizontal and vertical FRS for OBE and SSE conditions at the crane support are after seismic shock. Horizontal and vertical FRS for analysis are 4% for OBE and 7% for SSE. The crane consists of girder, saddle main and auxiliary trolley, and necessaries. They are modeled as beam elements and lumped masses for the following 4 cases ; trolley at center of the crane with and without the rated load, trolley at end with and without the rated load. The static analysis as well as the linear dynamic analysis including frequency and response spectrum analysis are performed for the seismic qualification of the crane using the Finite Element Method. For the simplicity of the analysis, the decoupling criteria are considered for the crane rope and the crane supporting beams. The main sections of the crane are stiffened until the calculated stresses satisfy the allowable limits. The seismic resultant loads are used to design the seismic restraints of the saddle and the trolley to protect the clue from the seismic uplifting loads the study results have show that the seismic design of the KMRR crane is governed by the OBE condition. not by the SSE condition. This paper briefly describes the analysis procedure used in the seismic design of the KMRR crane, and summarizes the analysis results.

• Structural Engineering and Mechanics
• /
• 제37권2호
• /
• pp.233-251
• /
• 2011

The seismic provisions of the current edition (2005) of the National Building Code of Canada (NBCC) differ significantly from the earlier edition. The current seismic provisions are based on the uniform hazard spectra corresponding to 2% probability of exceedance in 50 years, as opposed to the seismic hazard level with 10% probablity of exeedance in 50 years used in the earlier edition. Moreover, the current code is presented in an objective-based format where the design is performed based on an acceptable solution. In the light of these changes, an assessment of the expected performance of the buildings designed according to the requirements of the current edition of NBCC would be very useful. In this paper, the seismic performance of a set of six, twelve, and eighteen story buildings of regular geometry and with concrete moment resisting frames, designed for Vancouver western Canada, has been evaluated. Although the effects of non-structural elements are not considered in the design, the non-structural elements connected to the lateral load resisting systems affect the seismic performance of a building. To simulate the non-structural elements, infill panels are included in some frame models. Spectrum compatible artificial ground motion records and scaled actual accelerograms have been used for evaluating the dynamic response. The performance has been evaluated for each building under various levels of seismic hazard with different probabilities of exceedance. From the study it has been observed that, although all the buildings achieved the life-safety performance as assumed in the design provisions of the building code, their performance characteristics are found to be non-uniform.

• 한국구조물진단유지관리공학회 논문집
• /
• 제11권3호
• /
• pp.185-191
• /
• 2007

본 연구에서는 주거용 무량판구조의 내진성능을 개선하기 위한 면진적용 가능성을 평가하였으며, 시간이력 해석을 위한 지진기록 사용에 대한 문제점을 제시하였다. 면진층 강성 및 주기 평가 및 포락해석법을 적용하여 면진전 비틀림 모드가 강한 구조물을 면진시스템 적용으로 내진성능을 개선하였다. 지진기록 사용 및 크기 조절효과의 적정성을 평가하기 위하여 DBE, MCE, ASCE 7-05의 1.4DBE 의해 크기를 조정한 시간이력 해석결과를 비교한 결과, 구조물의 지반조건과 유사한 조건에서 관측된 지진기록 및 지진기록의 응답이 설계규준 응답스펙트럼의 평균${\pm}$표준편차 범위 안에 있는 기록을 사용하는 것이 적절한 것으로 판단된다.

• 한국지진공학회논문집
• /
• 제11권3호
• /
• pp.73-86
• /
• 2007

본 논문에서는 제4세대 소듐냉각고속로(Sodium-Cooled Fast Reactor)의 후보 노형으로 선정된 KALIMER-600에 대한 단순 지진해석모델을 개발하고 시간이력 지진응답해석을 수행하여 수평 면진설계(Seismic Isolation) 기술이 적용된 원자로건물의 주요기기 및 구조물에서의 지진응답 성능을 분석하였다. 개발된 단순 지진해석모델은 원자로건물, 원자로시스템, 주요 기기, 중간 열전달계통 배관, 그리고 면진장치를 포함하며 각각은 상세 유한요소해석을 통한 동특성 비교검증을 통하여 정확성을 검증하였다. 안전정지기준 0.3g의 설계인공지진 하중에 대한 시간이력 지진응답해석을 수행하여 면진설계와 비면진 설계조건에 따른 원자로 주요 부위에서의 층응답스펙트럼을 비교분석한 결과 KALIMER-600의 면진성능이 우수한 것으로 나타났다.

• Structural Engineering and Mechanics
• /
• 제14권3호
• /
• pp.287-306
• /
• 2002

The assessment of structural performance of transfer structures under potential seismic actions is presented. Various seismic assessment methodologies are used, with particular emphasis on the accurate modelling of the higher mode effects and the potential development of a soft storey effect in the mega-columns below the transfer plate (TP) level. Those methods include response spectrum analysis (RSA), manual calculation, pushover analysis (POA) and equivalent static load analysis (ESA). The capabilities and limitations of each method are highlighted. The paper aims, firstly, to determine the appropriate seismic assessment methodology for transfer structures using these different approaches, all of which can be undertaken with the resources generally available in a design office. Secondly, the paper highlights and discusses factors influencing the response behaviour of transfer structures, and finally provides a general indication of their seismic vulnerability. The representative Hong Kong building considered in this paper utilises a structural system with coupled shear walls and moment resisting portal-frames, above and below the TP, respectively. By adopting the wind load profile stipulated in the Code of Practice on Wind Effects: Hong Kong-1983, all the structural members are sized and detailed according to the British Standards BS8110 and the current local practices. The seismic displacement demand for the structure, when built on either rock or deep soil sites, was determined in a companion paper. The lateral load-displacement characteristic of the building, determined herein from manual calculation, has indicated that the poor ductility (brittle nature) of the mega-columns, due mainly to the high level of axial pre-compression as found from the analysis, cannot be effectively alleviated solely by increasing the quantity of confinement stirrups. The interstorey drift demands at lower and upper zones caused by seismic actions are found to be substantially higher than those arising from wind loads. The mega-columns supporting the TP and the coupling beams at higher zones are identified to be the most vulnerable components under seismic actions.

• KSBB Journal
• /
• 제30권2호
• /
• pp.63-68
• /
• 2015

This study aimed to develop and optimize a demucilaging process of Opuntia ficus-indica var. saboten (OFI) fruit to increase its usability as functional food ingredient and food additive. Viscozyme and Novozym 33095 as multienzyme complex having a broad spectrum of carbohydrases and pectolytic enzymes, respectively, were used in enzymatic dissolution along with high hydrostatic pressure liquefaction. To optimize the liquefaction process using high hydrostatic pressure liquefying extractor, response surface methodology with 3-factor central composite design was employed with reaction factors such as temperatures (25, 32, 40, 48, and $55^{\circ}C$), pressures (20, 40, 60, 80, and 100 MPa), and times (15, 30, 45, 60, and 75 min). At optimum conditions ($25^{\circ}C$, 100 MPa, and 58.275 min) for high hydrostatic pressure liquefaction process, the processed OFI fruit juice was predicted to have viscosity at 2.917 poise, partly due to the release of free sugars such as fructose and glucose detected using HPLC-ELSA system. The results above suggests that the OFI fruit juice with decreased viscosity may be used for various manufacturing processes of food, beverage, ice cream, and cosmetics.

• Earthquakes and Structures
• /
• 제11권5호
• /
• pp.779-807
• /
• 2016

Ground Motion Prediction Equations (GMPEs) are essential tools in seismic hazard analysis. With the introduction of probabilistic approaches for the estimation of seismic response of structures, also known as, performance based earthquake engineering framework; new tasks are defined for response spectrum such as the reference criterion for effective structure-specific selection of ground motions for nonlinear time history analysis. One of the recent efforts to introduce a high quality databank of ground motions besides the corresponding selection scheme based on the broadband spectral consistency is the development of SIMBAD (Selected Input Motions for displacement-Based Assessment and Design), which is designed to improve the reliability of spectral values at all natural periods by removing noise with modern proposed approaches. In this paper, a new global GMPE is proposed by using selected ground motions from SIMBAD to improve the reliability of computed spectral shape indicators. To determine regression coefficients, 204 pairs of horizontal components from 35 earthquakes with magnitude ranging from Mw 5 to Mw 7.1 and epicentral distances lower than 40 km selected from SIMBAD are used. The proposed equation is compared with similar models both qualitatively and quantitatively. After the verification of model by several goodness-of-fit measures, the epsilon values as the spectral shape indicator are computed and the validity of available prediction equations for correlation of the pairs of epsilon values is examined. General consistency between predictions by new model and others, especially, in short periods is confirmed, while, at longer periods, there are meaningful differences between normalized residuals and correlation coefficients between pairs of them estimated by new model and those are computed by other empirical equations. A simple collapse assessment example indicate possible improvement in the correlation between collapse capacity and spectral shape indicators (${\varepsilon}$) up to 20% by selection of a more applicable GMPE for calculation of ${\varepsilon}$.

• 한국해안해양공학회지
• /
• 제17권3호
• /
• pp.138-148
• /
• 2005

부유체 및 부유식 교량과 같은 부유식 구조물이 파랑하중에 대하여 나타내는 동적거동을 주파수영역에서 구하는 연구를 수행하였다. 먼저, 부분적으로 유체에 잠겨 파랑하중의 작용을 받는 부유체에 대하여, 이의 강체운동과 관련된 동유체력계수인 부가질량, 감쇠 및 파강제력를 선형포텐셜이론과 경계요소법을 이용하여 주파수 영역에서 산정한다 다음으로,부유식 교량과 같이 앞에서 구한 부유체로 지지되며 유한요소를 이용하여 모델링 되는 부유식 구조물에 대하여, o)의 동적거동에 관한 운동방정식을 수립한다. 동유체력계수들이 주파수 의존적 성질을 가지므로 해석은 주파수영역에서 수행한다. 적용 예제로서 반구와 같은 부유체를 이용하여 해석결과를 문헌과 비교 검증한 후,부유식 교량을 지지하는 폰툰형 부유체에 대한 동유체력계수들을 구하고, 이를 이용하여 설계 파랑하중을 받는 부유식 교량의 동적 거동해석을 수행한다. 해석 예제를 주파수영역에서 해석한 결과 입사파스펙트림의 피크 주파수와 교량의 고유진동수가 가까워 응답이 증폭될 소지가 있었으나 주파수 의존적인 파강제력의 피크가 벗어난 영향으로 응답이 증폭되지 않음을 알 수 있다.