1 |
FEMA-306 (1998), Evaluation of Earthquake Damaged Concrete and Masonry Wall Buildings - Basic Procedures Manual, prepared by the Applied Technology Council (ATC) for the Partnership for Response and Recovery and funded by the Federal Emergency Management Agency, Washington, D.C.
|
2 |
Finn, W.D.L. and Wightman, A. (2003), "Ground motion amplification factors for the proposed 2005 edition of the National Building Code of Canada", Can. J. Civil Eng., 30, 272-278.
DOI
ScienceOn
|
3 |
Heidebrecht, A.C. (2003), "Overview of the seismic provisions of the proposed 2005 edition of the National Building Code of Canada", Can. J. Civil Eng., 30, 241-254.
DOI
ScienceOn
|
4 |
Humar, J.L. and Mahgoub, M.A. (2003), "Determination of seismic design forces by equivalent static load method", Can. J. Civil Eng., 30, 287-307.
DOI
ScienceOn
|
5 |
IDARC2D (2006), A Program for the Inelastic Damage Analysis of Buildings - Version 6.1, National Center for Earthquake Engineering Research, State University of New York at Buffalo, NY, http://civil.eng.buffalo.edu/idarc2d50/.
|
6 |
Kunnath, S.K., Reinhorn, A.M. and Lobo, R.F. (1992), IDARC Version 3.0: A Program for the Inelastic Damage Analysis of Reinforced Concrete Structures, Report No. NCEER-92-0022, National Center for Earthquake Engineering Research, State University of New York at Buffalo, Buffalo, NY.
|
7 |
NBCC (1995), Canadian Commission on Building and Fire Code, National Building Code of Canada, National Research Council of Canada, Ottawa, Ontario.
|
8 |
NBCC (2005), Canadian Commission on Building and Fire Code, National Building Code of Canada, National Research Council of Canada, Ottawa, Ontario.
|
9 |
Park, Y.J. and Ang, A.H.S. (1985), "Mechanistic seismic damage model for reinforced concrete", J. Struct. Eng., 111, 722-739.
DOI
ScienceOn
|
10 |
Park, Y.J., Ang, A.H.S. and Wen, Y.K. (1987), "Damage-limiting aseismic design of buildings", Earthq. Spectra, 3(1), 1-26.
DOI
ScienceOn
|
11 |
PEER (2006), Pacific Earthquake Engineering Research Center: NGA Database, http://peer.berkeley.edu/nga/.
|
12 |
Prakash, V., Powell, G.H. and Campbell, S. (1993), DRAIN-2DX Base Program Description and User Guide: Version 1.10, Report No. UCB/SEMM-93/17, Department of Civil Engineering, University of California, Berkeley.
|
13 |
Saatcioglu, M. and Humar, J. (2003), "Dynamic analysis of buildings for earthquake resistant design", Can. J. Civil Eng., 30, 338-359.
DOI
ScienceOn
|
14 |
Shoostari, A. (1997), "Seismic drift demand of reinforced concrete buildings", Ph.D. Thesis, Department of Civil Engineering, University of Ottawa, Ottawa, Canada.
|
15 |
Tremblay, R. and Atkinson, G.M. (2001), "Comparative study of in elastic seismic demand of eastern and western Canadian sites", Earthq. Spectra, 17(2), 333-358.
DOI
ScienceOn
|
16 |
Valles, R.E., Reinhorn, A.M., Kunnath, S.K., Li, C. and Madan, A. (1996), IDARC 2D Version 4.0: A Program for the Inelastic Damage Analysis of Buildings, Report No. NCEER-96-0010, National Center for Earthquake Engineering Research, State University of New York at Buffalo, Buffalo, NY.
|
17 |
Vision 2000 (1995), Performance Based Seismic Engineering of Buildings, Structural Engineers Association of California (SEAOC), Sacramento, California.
|
18 |
Akbas, B., Nadar, M. and Shen, J. (2008), "A methodology to estimate earthquake induced worst failure probability of inelastic systems", Struct. Eng. Mech., 29(2), 187-201.
DOI
|
19 |
Adams, J. and Atkinson, G. (2003), "Development of seismic hazard maps for the proposed 2005 edition of the National Building Code of Canada", Can. J. Civil Eng., 30, 255-271.
DOI
ScienceOn
|
20 |
Adams, J. and Halchuck, S. (2003), "Fourth generation of the seismic hazard maps of Canada: Values for over 650 localities intended for the 2005 National building Code of Canada", Geological Survey of Canada Open File 4459, Natural Resources Canada, Ottawa, Canada.
|
21 |
Atkinson, G.M. and Beresnev, I.A. (1998), "Compatible ground motion time-histories for new National hazard maps", Can. J. Civil Eng., 25, 305-318.
DOI
ScienceOn
|
22 |
Bagchi, A. (2001), "Evaluation of the seismic performance of reinforced concrete buildings", PhD Thesis, Department of Civil and Environmental Engineering, Carleton University, Ottawa, Canada.
|
23 |
CSA (2001), Design of Concrete Structures, Standard A23.3-2001, Canadian Standards Association, Rexdale, Ontario.
|
24 |
De Vall, R. (2003), "Background information for some of the proposed earthquake design provisions for the 2005 edition of the National Building Code of Canada", Can. J. Civil Eng., 30, 279-286.
DOI
ScienceOn
|
25 |
El Kafrawy, O. (2006), "Seismic performance evaluation of reinforced concrete moment resisting frames", M.A.Sc. Thesis, Department of Building, Civil and Environmental Engineering, Concordia University, Montreal, Canada.
|
26 |
El Kafrawy, O. and Bagchi, A. (2007), "Computer aided design and analysis of reinforced concrete frame buildings for seismic forces", Inform. Technol. J., 6(6), 798-808.
DOI
|
27 |
Fajfar, P., Gaspersic, P. and Drobnic, D. (1997), "A simplified nonlinear method for seismic damage analysis of structures", Seismic Design Methodologies for the Next Generation of Codes, Eds. Fajfar and Krawinkler, 183-193.
|